HUATAO | Source reference profile Equipment: Automatic Pig Carcass Washing Machine Source section: 1.6 Compilation R1 | 2026-11-16 Document: 1. 致晕,宰杀,放血 设备 Pig Stunning, Killing and Bleeding Equipment.doc Source-listed data; confirm exact model, configuration and drawing revision in writing. Not a certificate, test report or performance guarantee. Source reference configuration 1 Parameter | Reference Value / Buyer Check Model | HT-P114 Rated voltage / phase / frequency | 380v / 3p / 50hz Power | 3 *1.5Kw Axis | 3sets Out size | 2400*1800*2710mm(L*W*H) Component and material | 1)- Stainless square steel 60X60X4mm,40X40X2mm 2)- Stainless steel axis 3)- Stainless steel plate 4mm shell 4)-Stainless steel plate 1.5mm water collection channel Model | HT-P504-II Power | 0.75kw Rated flow | 2m 3 /h Max capacity | 400 heads per hour Out size | 1300*1150*3020mm (L*W*H) Component and material | 1)-2mm stainless steel shell 2)-High pressure water pump and water pipe connection 3)-Electronic control system 4)-Automatic induction, Washing time adjustable Quotation control | State capacity, carcass size, inlet water quality, pressure, flow, drain location and whether chemical dosing is allowed by the local hygiene plan. Selection information required: Define product size, residence time, line speed, water quality, temperature, pressure, flow and drainage. Specify the hygiene process and acceptance method; a machine name does not establish a validated hygiene result.