SlaughterPro | HUATAOSearch

Living Cattle Killing Platform for Beef Slaughterhouse | HT-C106-II

Living Cattle Killing Platform. Compare load range, dimensions and process interfaces; share your requirements for configuration review.

Living Cattle Killing Platform for Beef Slaughterhouse | HT-C106-II — supplied product-directory equipment/process illustration; exact model configuration must be confirmed

Supplied product-directory reference image: equipment family or process context. It is not proof of an exact model, HUATAO installation or certification. Confirm the proposed configuration photograph and drawing before ordering.

Specification notes

ModelHT-C106-II
MaterialHot Galvanized Steel / Stainless Steel
Platform SizeApprox. 1600 × 1000 × 650 mm
Data statusSource reference R1; configuration requires written confirmation

Use and process role

Living Cattle Killing Platform for Safe and Efficient Cattle Slaughtering

The living cattle killing platform is a professional slaughterhouse equipment designed for cattle slaughtering operations in beef processing plants, abattoirs, and halal slaughter facilities.

After cattle are restrained and positioned in the slaughter area, the killing platform provides a stable working surface for operators to perform the slaughtering and bleeding procedures safely and efficiently.

The platform is manufactured with a heavy-duty steel structure and corrosion-resistant materials suitable for wet slaughterhouse environments. It is designed to work together with cattle restraint boxes, stunning systems, carcass lifting equipment, and bleeding conveyors.

Compared with traditional manual working areas, the dedicated cattle killing platform provides:

Improved operator safety

Better working position

More standardized slaughter procedures

Easier cleaning and maintenance

The equipment is commonly installed in the live cattle killing and bleeding section of beef slaughterhouses. EME lists the living cattle killing platform as part of its cattle slaughter and bleeding equipment group, together with cattle stunning boxes, carcass hoists, bleeding rails, and shackles.

Structure and working principle

The living cattle killing platform works as a fixed operating workstation during the cattle slaughter process.

After the animal enters the restraint area, the cattle is positioned securely by the front restraint or killing box system.

The operator stands on the elevated platform and performs the slaughter operation at a suitable working height.

After slaughtering, the carcass is transferred to the bleeding system through shackles, hoists, or overhead rail conveyors.

The platform provides stable support throughout the operation, helping operators complete slaughter procedures safely and efficiently.

Source-listed construction and features

1. Stable Heavy-Duty Structure

The platform adopts a reinforced steel structure designed for industrial slaughterhouse operation.

Applications and integration

The living cattle killing platform is mainly used in:

Beef slaughterhouses

Cattle abattoirs

Halal slaughter facilities

Meat processing plants

Livestock processing centers

Typical workflow:

Live Cattle Receiving

↓

Cattle Restraining Box

Living Cattle Killing Platform

Bleeding Operation

Carcass Hoisting

Carcass Processing Line

It is suitable for both traditional halal slaughter operations and industrial beef processing facilities.

Selection conditions and project fit

Provide species, full live-weight and size range, required rate, animal handling procedure, operator position, entry/exit interfaces and destination requirements. Safety arrangements and the applicable procedure require project-specific engineering confirmation.

Evidence, configuration and document status

The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.

Source and version

Reference compilation R1, 2026-11-16. Supplied document: 1. 牛致晕宰杀放血设备.doc; section 1.10. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.

Installation and process interfaces

Provide the load and product range, travel direction, rail/belt section or mating geometry, working heights, supports and maintenance clearances. Similar appearance is not proof of fit.

Utilities, control and feedback requirements

For powered equipment, confirm the matching drive, supply, control and line signals. For passive components, confirm mechanical interfaces and any requirements of the receiving equipment; no powered or feedback capability should be assumed.

Maintenance and part identification

Request the configuration-specific manual and part references for rollers, chains, hooks, bearings, guides and drive elements where applicable. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.

Configuration-specific document checklist

Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.

Compare configurations for your project

For Living Cattle Killing Platform for Beef Slaughterhouse | HT-C106-II, keep the complete identifier HT-C106-II attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.

Start with this page's listed reference fields: Material: Hot Galvanized Steel / Stainless Steel; Platform Size: Approx. 1600 × 1000 × 650 mm. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.

Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.

Purchasing review and enquiry preparation

Start with Living Cattle Killing Platform for Beef Slaughterhouse | HT-C106-II and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.

Use the linked cattle & beef processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.

Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-C106-II and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.

Source reference configuration 1
ItemSpecification
Product NameLiving Cattle Killing Platform
ModelHT-C106-II
ApplicationCattle slaughtering operation
Suitable AnimalCattle / Bull / Buffalo
Structure TypeFixed Operating Platform
MaterialHot Galvanized Steel / Stainless Steel
Platform SizeApprox. 1600 × 1000 × 650 mm
InstallationFloor Mounted
Working AreaCattle Killing & Bleeding Section
Compatible EquipmentKilling Box, Hoist, Bleeding Rail

Buyer FAQ

What is a cattle killing platform used for?

It provides a stable working area for operators during cattle slaughter and bleeding procedures.

What materials are used?

The platform can be manufactured using hot galvanized steel or stainless steel depending on customer requirements.

What equipment is normally installed together with this platform?

Common combinations include: Cattle killing box Pneumatic stunner Carcass hoist Bleeding rail system Recommended URL 推荐: /living-cattle-killing-platform/

What information is needed to select this equipment?

Provide species, full live-weight and size range, required rate, animal handling procedure, operator position, entry/exit interfaces and destination requirements. Safety arrangements and the applicable procedure require project-specific engineering confirmation.

Are these specifications an approved supply commitment?

No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.

Related configurations and guidance

Cattle & beef processing equipment categories Cattle & beef processing process application Check complete model identifiers and suffixes

Reference specification and document status

Download HT-C106-II reference specification and verification checklist

This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.

Applications

Cattle & beef processing workflowExplore cattle & beef processing by process task, source equipment and project conditions.

Capabilities

Cattle & beef processing line planningExplore cattle & beef processing by process task, source equipment and project conditions.

Request specifications

Add company or technical details (optional)

Equipment under review: HT-C106-II

Start with what you know. You can send drawings or photographs by email.

Continue your technical review