Live pig weighing scale | HT-P102
Live pig weighing scale. Compare load range, weighing method and line interfaces; share your requirements for configuration review.

Specification notes
| Model | HT-P102 |
|---|---|
| Differentiate Capacity | 500g |
| Out size | 2000*1200*1600(L*W*H) |
| Component and material | 1) Hot galvanized or stainless steel s quare steel 75*150*5mm main frame 2) Hot galvanized or stainless steel 3mm checkered steel plate 3) Pcs high precision weighing sensor 4) LCD display with digital weighing |
| Data status | Source reference R1; configuration requires written confirmation |
Use and process role
This Live Pig Weighing Scale is specified for one practical job: an in-line weighing point for live pigs, carcasses or rail-borne product. A reliable installation begins with correct interface dimensions and a realistic duty cycle. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for comparison. For export quotations, confirm voltage, materials, guarding, spare parts and documentation before the purchase order is released.
Structure and working principle
Load cells measure the weight while the animal or carrier is stationary or moving through the defined weighing section. The indicator converts the signal into a displayed or transmitted value for production and traceability records. The upstream machine must not feed faster than the receiving station can clear.
Source-listed construction and features
Capacity and division suited to the load
Stable mechanical isolation
Wash-down-compatible load cells
Indicator positioned for the operator
Data output options
Calibration access
Applications and integration
The usual application is live-pig reception, carcass grading, production reporting and dispatch control. It can be specified for a new line or adapted to a retrofit, provided that the existing supports, working heights, utilities and control signals are measured on site. Plants handling several pig sizes should state the full range rather than quoting only an average.
Selection conditions and project fit
Specify maximum and minimum load, required division, static or dynamic operation, line speed, calibration requirements and the data interface. Confirm any legal-for-trade requirement separately.
Evidence, configuration and document status
The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.
Source and version
Reference compilation R1, 2026-11-16. Supplied document: 1. 致晕,宰杀,放血 设备 Pig Stunning, Killing and Bleeding Equipment.doc; section 1.22. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.
Installation and process interfaces
Specify rail/platform geometry, mechanical isolation, stable support, transfer height and access for calibration. State static or dynamic weighing and the required data connection.
Utilities, control and feedback requirements
Ask which indicator, sensor and output signals are included. State the required division and destination-specific verification needs; no legal-for-trade approval is established by a generic reference.
Maintenance and part identification
Request the configuration-specific manual and part references for load cells, indicator, cables and mounting components. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.
Configuration-specific document checklist
Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.
Source-unit confirmation required
The supplied reference does not explicitly state a unit for these fields: Out size. The original entries are retained rather than assigning an assumed unit. Confirm the units, matching configuration and operating conditions before comparing these figures or approving a quotation.
Compare configurations for your project
For Live pig weighing scale | HT-P102, keep the complete identifier HT-P102 attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.
Start with this page's listed reference fields: Differentiate Capacity: 500g; Out size: 2000*1200*1600(L*W*H); Component and material: 1) Hot galvanized or stainless steel s quare steel 75*150*5mm main frame 2) Hot galvanized or stainless steel 3mm checkered steel plate 3) Pcs high precision weighing sensor 4) LCD display with digital weighing. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.
Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.
Purchasing review and enquiry preparation
Start with Live pig weighing scale | HT-P102 and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.
Use the linked pig processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.
Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-P102 and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.
| Parameter | Reference Value / Buyer Check |
|---|---|
| Model | HT-P102 |
| Application | Which main used to weight the living pig before slaughtering |
| Max weight | 1000Kg |
| Differentiate Capacity | 500g |
| Out size | 2000*1200*1600(L*W*H) |
| Component and material | 1) Hot galvanized or stainless steel s quare steel 75*150*5mm main frame 2) Hot galvanized or stainless steel 3mm checkered steel plate 3) Pcs high precision weighing sensor 4) LCD display with digital weighing |
| Quotation control | Specify maximum load, minimum division, static or dynamic operation, platform or rail dimensions, legal-for-trade requirement and the target software interface. |
Buyer FAQ
What information is needed to quote the Live Pig Weighing Scale?
Specify maximum load, minimum division, static or dynamic operation, platform or rail dimensions, legal-for-trade requirement and the target software interface.
Which spare parts should be ordered with the machine?
Start with the normal wear and hygiene parts for this duty: bearings, seals, sensors, chains or belts, nozzles, blades, scrapers, pneumatic parts and electrical protection devices as applicable. The supplier should issue a model-specific list.
Are the published technical figures final?
No. The table records reference information from the citedHTpage. Capacity, power, dimensions, material grade and utilities must be confirmed on the quotation and approved drawing.
How should the equipment be accepted after installation?
Use a documented site-acceptance test covering alignment, guards, emergency stops, interlocks, dry running, representative load, cleaning access, leakage or drainage, operator training and delivery of manuals and spares.
What information is needed to select this equipment?
Specify maximum and minimum load, required division, static or dynamic operation, line speed, calibration requirements and the data interface. Confirm any legal-for-trade requirement separately.
Are these specifications an approved supply commitment?
No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.
Related configurations and guidance
Reference specification and document status
Download HT-P102 reference specification and verification checklist
This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.