SlaughterPro | HUATAOSearch

Empty Pulley Hook Lifting Machine | HT-P509

Empty Pulley Hook Lifting Machine. Compare load range, dimensions and process interfaces; share your requirements for configuration review.

Empty Pulley Hook Lifting Machine — source product-family photograph; confirm the quoted configuration

Specification notes

ModelHT-P509
Rated voltage/Phase/Frequency380V/3P/50HZ
Power1.1kw
Component and material1)Hot galvanized steel or Stainless steel 8# double channel steel with rail hanger 2)Hot galvanized steel or Stainless steel plate chain with pusher dog 3)Stainless steel tube rail (φ60*4mm) or dual-orbit rail( 40*40*4mm) or flat rail (60*10mm) 4)High polymer wear-resistant walking wheel 5)Driving device and tension device
Data statusSource reference R1; configuration requires written confirmation

Use and process role

In a pig plant, the Empty Pulley Hook Lifting Machine serves as a powered or manual handling section that keeps carcasses, hooks, offal or product moving between process stations. The final build must match the actual product load, room layout and cleaning routine at site. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for comparison. For export quotations, confirm voltage, materials, guarding, spare parts and documentation before the purchase order is released.

Structure and working principle

The load is supported by a belt, chain, rollers or an overhead carrier. A drive and tension arrangement advances it at a set or adjustable speed, while guides keep the load aligned through the transfer zone. Operators need a clear stop-and-recovery routine for a jam, tool change or hygiene break.

Source-listed construction and features

Stable transfer between adjacent machines

Speed selected for the line balance

Open access for cleaning

Replaceable wear parts

Guards around drives and pinch points

Layout options for new lines or retrofits

Applications and integration

The usual application is pig slaughter lines, inspection areas, cutting rooms and other stations that need orderly product flow. It can be specified for a new line or adapted to a retrofit, provided that the existing supports, working heights, utilities and control signals are measured on site. Plants handling several pig sizes should state the full range rather than quoting only an average.

Selection conditions and project fit

Provide rail or belt dimensions, working height, travel direction, carrier spacing, load range, speed and upstream/downstream connection drawings. A similar-looking carrier is not proof of fit.

Evidence, configuration and document status

The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.

Source and version

Reference compilation R1, 2026-11-16. Supplied document: 1. 致晕,宰杀,放血 设备 Pig Stunning, Killing and Bleeding Equipment.doc; section 1.13. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.

Installation and process interfaces

Provide the load and product range, travel direction, rail/belt section or mating geometry, working heights, supports and maintenance clearances. Similar appearance is not proof of fit.

Utilities, control and feedback requirements

For powered equipment, confirm the matching drive, supply, control and line signals. For passive components, confirm mechanical interfaces and any requirements of the receiving equipment; no powered or feedback capability should be assumed.

Maintenance and part identification

Request the configuration-specific manual and part references for rollers, chains, hooks, bearings, guides and drive elements where applicable. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.

Configuration-specific document checklist

Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.

Compare configurations for your project

For Empty Pulley Hook Lifting Machine | HT-P509, keep the complete identifier HT-P509 attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.

Start with this page's listed reference fields: Rated voltage/Phase/Frequency: 380V/3P/50HZ; Power: 1.1kw; Component and material: 1)Hot galvanized steel or Stainless steel 8# double channel steel with rail hanger 2)Hot galvanized steel or Stainless steel plate chain with pusher dog 3)Stainless steel tube rail (φ60*4mm) or dual-orbit rail( 40*40*4mm) or flat rail (60*10mm) 4)High polymer wear-resistant walking wheel 5)Driving device and tension device. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.

Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.

Purchasing review and enquiry preparation

Start with Empty Pulley Hook Lifting Machine | HT-P509 and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.

Use the linked pig processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.

Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-P509 and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.

Source reference configuration 1
ParameterReference Value / Buyer Check
ModelHT-P509
ApplicationWhich is used to lifting idle hooks and transfer for cycling use
Rated voltage/Phase/Frequency380V/3P/50HZ
Power1.1kw
Lifting height1200-1800mm
Pusher dog400mm
Component and material1)Hot galvanized steel or Stainless steel 8# double channel steel with rail hanger 2)Hot galvanized steel or Stainless steel plate chain with pusher dog 3)Stainless steel tube rail (φ60*4mm) or dual-orbit rail( 40*40*4mm) or flat rail (60*10mm) 4)High polymer wear-resistant walking wheel 5)Driving device and tension device
Quotation controlConfirm load, usable width, length, speed, working height, drive position, line direction and controls. For overhead systems, add rail profile, trolley type and suspension spacing.

Buyer FAQ

What information is needed to quote the Empty Pulley Hook Lifting Machine?

Confirm load, usable width, length, speed, working height, drive position, line direction and controls. For overhead systems, add rail profile, trolley type and suspension spacing.

Which spare parts should be ordered with the machine?

Start with the normal wear and hygiene parts for this duty: bearings, seals, sensors, chains or belts, nozzles, blades, scrapers, pneumatic parts and electrical protection devices as applicable. The supplier should issue a model-specific list.

Are the published technical figures final?

No. The table records reference information from the citedHTpage. Capacity, power, dimensions, material grade and utilities must be confirmed on the quotation and approved drawing.

How should the equipment be accepted after installation?

Use a documented site-acceptance test covering alignment, guards, emergency stops, interlocks, dry running, representative load, cleaning access, leakage or drainage, operator training and delivery of manuals and spares.

What information is needed to select this equipment?

Provide rail or belt dimensions, working height, travel direction, carrier spacing, load range, speed and upstream/downstream connection drawings. A similar-looking carrier is not proof of fit.

Are these specifications an approved supply commitment?

No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.

Related configurations and guidance

Pig processing equipment categories Pig processing process application Check complete model identifiers and suffixes

Reference specification and document status

Download HT-P509 reference specification and verification checklist

This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.

Applications

Pig processing workflowExplore pig processing by process task, source equipment and project conditions.

Capabilities

Pig processing line planningExplore pig processing by process task, source equipment and project conditions.

Request specifications

Add company or technical details (optional)

Equipment under review: HT-P509

Start with what you know. You can send drawings or photographs by email.

Continue your technical review

Pig processing processCompare published equipmentPrepare quotation informationSupplier verification checklistIdentify related replacement parts