SlaughterPro | HUATAOSearch

Pig Carcass Splitting Saw Sterilizer | HT-P502-VI

Pig Carcass Splitting Saw Sterilizer. Compare product range, residence time and utility conditions; share your requirements for configuration review.

Pig Carcass Splitting Saw Sterilizer — source product-family photograph; confirm the quoted configuration

Specification notes

ModelHT-P502-VI
Size1060*360*1200mm(L*W*H)
Material1) Stainless steel 2) Thickness: 2mm
Data statusSource reference R1; configuration requires written confirmation

Use and process role

The Pig Carcass Splitting Saw Sterilizer is designed as a dedicated station that cleans and heat-treats a slaughter tool between carcasses or at scheduled intervals. It should be treated as part of the process flow, not as a stand-alone catalogue item. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for comparison. For export quotations, confirm voltage, materials, guarding, spare parts and documentation before the purchase order is released.

Structure and working principle

The saw or shear enters a chamber or holder where water reaches the specified sanitation temperature and contacts the working surfaces. Drainage removes used water before the tool returns to service. During commissioning, the sequence should be tested first without product and then under a representative load.

Source-listed construction and features

Holder matched to the actual tool

Controlled hot-water contact

Safe insertion and removal

Drainable stainless enclosure

Temperature monitoring provision

Access for descaling and cleaning

Applications and integration

The usual application is splitting saw, head shear and hand-tool stations that require documented between-cycle hygiene. It can be specified for a new line or adapted to a retrofit, provided that the existing supports, working heights, utilities and control signals are measured on site. Plants handling several pig sizes should state the full range rather than quoting only an average.

Selection conditions and project fit

Define product size, residence time, line speed, water quality, temperature, pressure, flow and drainage. Specify the hygiene process and acceptance method; a machine name does not establish a validated hygiene result.

Evidence, configuration and document status

The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.

Source and version

Reference compilation R1, 2026-11-16. Supplied document: 1. 致晕,宰杀,放血 设备 Pig Stunning, Killing and Bleeding Equipment.doc; section 1.16. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.

Installation and process interfaces

State incoming product condition, process residence time, line speed, working height, water connections, drain location and access for cleaning or component removal. Check the full installation envelope, not only catalogue dimensions.

Utilities, control and feedback requirements

Use only the power, water, heating or cooling values given for the matching source configuration. Confirm operating pressure/flow or temperature, control method and line signals. A reference machine does not establish a validated hygiene or cooling result.

Maintenance and part identification

Request the configuration-specific manual and part references for nozzles, seals, pumps, sensors, conveying elements and any heating/cooling components fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.

Configuration-specific document checklist

Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.

Compare configurations for your project

For Pig Carcass Splitting Saw Sterilizer | HT-P502-VI, keep the complete identifier HT-P502-VI attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.

Start with this page's listed reference fields: Size: 1060*360*1200mm(L*W*H); Material: 1) Stainless steel 2) Thickness: 2mm. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.

Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.

Purchasing review and enquiry preparation

Start with Pig Carcass Splitting Saw Sterilizer | HT-P502-VI and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.

Use the linked pig processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.

Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-P502-VI and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.

Source reference configuration 1
ParameterReference Value / Buyer Check
ModelHT-P502-VI
ApplicationWhich main used for pig carcass band splitting saw sterilizing
Size1060*360*1200mm(L*W*H)
Material1) Stainless steel 2) Thickness: 2mm
Quotation controlState the tool model, blade or jaw dimensions, water temperature requirement, recovery time, inlet pressure, drain size and electrical supply if heating is included.

Buyer FAQ

What information is needed to quote the Pig Carcass Splitting Saw Sterilizer?

State the tool model, blade or jaw dimensions, water temperature requirement, recovery time, inlet pressure, drain size and electrical supply if heating is included.

Which spare parts should be ordered with the machine?

Start with the normal wear and hygiene parts for this duty: bearings, seals, sensors, chains or belts, nozzles, blades, scrapers, pneumatic parts and electrical protection devices as applicable. The supplier should issue a model-specific list.

Are the published technical figures final?

No. The table records reference information from the citedHTpage. Capacity, power, dimensions, material grade and utilities must be confirmed on the quotation and approved drawing.

How should the equipment be accepted after installation?

Use a documented site-acceptance test covering alignment, guards, emergency stops, interlocks, dry running, representative load, cleaning access, leakage or drainage, operator training and delivery of manuals and spares.

What information is needed to select this equipment?

Define product size, residence time, line speed, water quality, temperature, pressure, flow and drainage. Specify the hygiene process and acceptance method; a machine name does not establish a validated hygiene result.

Are these specifications an approved supply commitment?

No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.

Related configurations and guidance

Pig processing equipment categories Pig processing process application Check complete model identifiers and suffixes

Reference specification and document status

Download HT-P502-VI reference specification and verification checklist

This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.

Applications

Pig processing workflowExplore pig processing by process task, source equipment and project conditions.

Capabilities

Pig processing line planningExplore pig processing by process task, source equipment and project conditions.

Request specifications

Add company or technical details (optional)

Equipment under review: HT-P502-VI

Start with what you know. You can send drawings or photographs by email.

Continue your technical review

Pig processing processCompare published equipmentPrepare quotation informationSupplier verification checklistIdentify related replacement parts