SlaughterPro | HUATAOSearch

Pig Half Carcass Automatic Washing Machine | HT-P504-II

Pig Half Carcass Automatic Washing Machine. Compare product range, residence time and utility conditions; share your requirements for configuration review.

Pig Half Carcass Automatic Washing Machine — source product-family photograph; confirm the quoted configuration

Specification notes

ModelHT-P504-II
Rated voltage/Phase/Frequency380V/3P/50HZ
Power0.75kw
Max capacity400 heads per hour
Out size1300*1150*3020mm (L*W*H)
Component and material1) Stainless steel shell (2mm) 2) High pressure water pump and water pipe connection 3) Electronic control system 4) Automatic induction and washing time adjustable
Data statusSource reference R1; configuration requires written confirmation

Use and process role

In a pig plant, the Pig Half Carcass Automatic Washing Machine serves as a carcass-cleaning station that removes loose contamination with controlled water contact before the next process step. The final build must match the actual product load, room layout and cleaning routine at site. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for comparison. For export quotations, confirm voltage, materials, guarding, spare parts and documentation before the purchase order is released.

Structure and working principle

The carcass passes fixed sprays, moving nozzles or rotating cleaning elements. Water pressure, exposure time and carcass position are set so the surface is covered without creating unnecessary splash or water use. Operators need a clear stop-and-recovery routine for a jam, tool change or hygiene break.

Source-listed construction and features

Consistent coverage of the target surface

Contained splash and drainage

Wash-down-compatible enclosure

Adjustable cleaning time or pressure

Access to nozzles and filters

Interfaces for automatic line operation

Applications and integration

The usual application is post-bleeding, post-splitting or final carcass-cleaning positions in pig processing lines. It can be specified for a new line or adapted to a retrofit, provided that the existing supports, working heights, utilities and control signals are measured on site. Plants handling several pig sizes should state the full range rather than quoting only an average.

Selection conditions and project fit

Define product size, residence time, line speed, water quality, temperature, pressure, flow and drainage. Specify the hygiene process and acceptance method; a machine name does not establish a validated hygiene result.

Evidence, configuration and document status

The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.

Source and version

Reference compilation R1, 2026-11-16. Supplied document: 1. 致晕,宰杀,放血 设备 Pig Stunning, Killing and Bleeding Equipment.doc; section 1.17. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.

The supplied documents reference one or more identifiers on other equipment pages. A repeated identifier is not proof that specifications, duties or revisions are identical. Review the linked source configurations and request a model-specific drawing before treating them as equivalent.

Installation and process interfaces

State incoming product condition, process residence time, line speed, working height, water connections, drain location and access for cleaning or component removal. Check the full installation envelope, not only catalogue dimensions.

Utilities, control and feedback requirements

Use only the power, water, heating or cooling values given for the matching source configuration. Confirm operating pressure/flow or temperature, control method and line signals. A reference machine does not establish a validated hygiene or cooling result.

Maintenance and part identification

Request the configuration-specific manual and part references for nozzles, seals, pumps, sensors, conveying elements and any heating/cooling components fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.

Configuration-specific document checklist

Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.

Compare configurations for your project

For Pig Half Carcass Automatic Washing Machine | HT-P504-II, keep the complete identifier HT-P504-II attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.

Start with this page's listed reference fields: Rated voltage/Phase/Frequency: 380V/3P/50HZ; Power: 0.75kw; Max capacity: 400 heads per hour; Out size: 1300*1150*3020mm (L*W*H); Component and material: 1) Stainless steel shell (2mm) 2) High pressure water pump and water pipe connection 3) Electronic control system 4) Automatic induction and washing time adjustable. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.

Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.

Purchasing review and enquiry preparation

Start with Pig Half Carcass Automatic Washing Machine | HT-P504-II and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.

Use the linked pig processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.

Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-P504-II and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.

Source reference configuration 1
ParameterReference Value / Buyer Check
ModelHT-P504-II
ApplicationWhich is used to clean pig half carcass by automatic
Rated voltage/Phase/Frequency380V/3P/50HZ
Power0.75kw
Rated flow2m3/h
Max capacity400 heads per hour
Out size1300*1150*3020mm (L*W*H)
Component and material1) Stainless steel shell (2mm) 2) High pressure water pump and water pipe connection 3) Electronic control system 4) Automatic induction and washing time adjustable
Quotation controlState capacity, carcass size, inlet water quality, pressure, flow, drain location and whether chemical dosing is allowed by the local hygiene plan.

Buyer FAQ

What information is needed to quote the Pig Half Carcass Automatic Washing Machine?

State capacity, carcass size, inlet water quality, pressure, flow, drain location and whether chemical dosing is allowed by the local hygiene plan.

Which spare parts should be ordered with the machine?

Start with the normal wear and hygiene parts for this duty: bearings, seals, sensors, chains or belts, nozzles, blades, scrapers, pneumatic parts and electrical protection devices as applicable. The supplier should issue a model-specific list.

Are the published technical figures final?

No. The table records reference information from the citedHTpage. Capacity, power, dimensions, material grade and utilities must be confirmed on the quotation and approved drawing.

How should the equipment be accepted after installation?

Use a documented site-acceptance test covering alignment, guards, emergency stops, interlocks, dry running, representative load, cleaning access, leakage or drainage, operator training and delivery of manuals and spares.

What information is needed to select this equipment?

Define product size, residence time, line speed, water quality, temperature, pressure, flow and drainage. Specify the hygiene process and acceptance method; a machine name does not establish a validated hygiene result.

Are these specifications an approved supply commitment?

No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.

Related configurations and guidance

Related source configuration: Automatic Pig Carcass Washing Machine Pig processing equipment categories Pig processing process application Check complete model identifiers and suffixes

Reference specification and document status

Download HT-P504-II reference specification and verification checklist

This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.

Applications

Pig processing workflowExplore pig processing by process task, source equipment and project conditions.

Capabilities

Pig processing line planningExplore pig processing by process task, source equipment and project conditions.

Request specifications

Add company or technical details (optional)

Equipment under review: HT-P504-II

Start with what you know. You can send drawings or photographs by email.

Continue your technical review

Pig processing processCompare published equipmentPrepare quotation informationSupplier verification checklistIdentify related replacement parts