Three-Point Electrical Pig Stunning Machine | HT-P106-III
Three-Point Electrical Pig Stunning Machine. Compare animal range, handling method and transfer interfaces; share your requirements for configuration review.

Specification notes
| Model | HT-P106-III |
|---|---|
| Power | 3Kw |
| Loading weight | 100 ± 25Kg |
| Out size | 6000*100*1750mm(L*W*H) |
| Component and material | 1 . Hot galvanized or stainless steel main frame 2.High-quality carbon steel sprockets, chains, drive shaft 3.Rubber block 4.Stainless steel protective cover 5.PLC controlling system 6.Photoelectric switches 7.Frequency converter 8.Intermediate relay 9. Low-voltage electrical |
| Data status | Source reference R1; configuration requires written confirmation |
Use and process role
For line designers, the Three-Point Electrical Pig Stunning Machine provides a restrained or hand-operated stunning station intended to render pigs insensible before shackling and bleeding. Its value depends on the hand-off before and after the machine, so the rail, floor level and controls should be reviewed together. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for comparison. For export quotations, confirm voltage, materials, guarding, spare parts and documentation before the purchase order is released.
Structure and working principle
The pig is guided into a controlled position. The selected electrical, mechanical or other approved stunning method is applied using verified settings, and the animal is discharged promptly for sticking within the plant's welfare time limit. Cleaning access and safe isolation are part of the operating principle, not optional extras.
Source-listed construction and features
Calm animal entry and controlled positioning
Settings matched to pig size and local rules
Fast access for the bleeding step
Non-slip, washable contact surfaces
Emergency release provision
Recording or verification options where required
Applications and integration
The usual application is small, medium and industrial pig abattoirs operating under an approved animal-welfare procedure. It can be specified for a new line or adapted to a retrofit, provided that the existing supports, working heights, utilities and control signals are measured on site. Plants handling several pig sizes should state the full range rather than quoting only an average.
Selection conditions and project fit
Provide species, full live-weight and size range, required rate, animal handling procedure, operator position, entry/exit interfaces and destination requirements. Safety arrangements and the applicable procedure require project-specific engineering confirmation.
Evidence, configuration and document status
The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.
Source and version
Reference compilation R1, 2026-11-16. Supplied document: 1. 致晕,宰杀,放血 设备 Pig Stunning, Killing and Bleeding Equipment.doc; section 1.23. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.
Installation and process interfaces
Provide the full animal weight/size range, approach and exit route, operator position and the interface to the receiving rail or conveyor. Allow access for the proposed guarding and maintenance arrangement.
Utilities, control and feedback requirements
Confirm the proposed electrical, pneumatic or hydraulic arrangement from the matching model table. Agree control positions, emergency stopping and interlocks with the responsible engineering team; do not assume a universal slaughter procedure or approval.
Maintenance and part identification
Request the configuration-specific manual and part references for restraint components, drive parts, hoses and controls where fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.
Configuration-specific document checklist
Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.
Compare configurations for your project
For Three-Point Electrical Pig Stunning Machine | HT-P106-III, keep the complete identifier HT-P106-III attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.
Start with this page's listed reference fields: Power: 3Kw; Loading weight: 100 ± 25Kg; Out size: 6000*100*1750mm(L*W*H); Component and material: 1 . Hot galvanized or stainless steel main frame 2.High-quality carbon steel sprockets, chains, drive shaft 3.Rubber block 4.Stainless steel protective cover 5.PLC controlling system 6.Photoelectric switches 7.Frequency converter 8.Intermediate relay 9. Low-voltage electrical. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.
Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.
Purchasing review and enquiry preparation
Start with Three-Point Electrical Pig Stunning Machine | HT-P106-III and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.
Use the linked pig processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.
Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-P106-III and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.
| Parameter | Reference Value / Buyer Check |
|---|---|
| Model | HT-P106-III |
| Application | Which main used to fix and convey living pig for automatic stunning |
| Power | 3Kw |
| Stunning frequency | 50Hz |
| Stunning current | ≤ 5A |
| Stunning time | ≤ 4s |
| Air consumption | ≤ 0.5M ³ /Min |
| Air pressure | 0.4-0.6Mpa |
| Loading weight | 100 ± 25Kg |
| Missed rate | ≤ 1% |
| Out size | 6000*100*1750mm(L*W*H) |
| Component and material | 1 . Hot galvanized or stainless steel main frame 2.High-quality carbon steel sprockets, chains, drive shaft 3.Rubber block 4.Stainless steel protective cover 5.PLC controlling system 6.Photoelectric switches 7.Frequency converter 8.Intermediate relay 9. Low-voltage electrical |
| Quotation control | The buyer must state the approved stunning method, pig weight range, throughput, restraint layout, local welfare standard, backup procedure and electrical supply. Final settings require competent veterinary validation. |
Buyer FAQ
What information is needed to quote the Three-Point Electrical Pig Stunning Machine?
The buyer must state the approved stunning method, pig weight range, throughput, restraint layout, local welfare standard, backup procedure and electrical supply. Final settings require competent veterinary validation.
Which spare parts should be ordered with the machine?
Start with the normal wear and hygiene parts for this duty: bearings, seals, sensors, chains or belts, nozzles, blades, scrapers, pneumatic parts and electrical protection devices as applicable. The supplier should issue a model-specific list.
Are the published technical figures final?
No. The table records reference information from the citedHTpage. Capacity, power, dimensions, material grade and utilities must be confirmed on the quotation and approved drawing.
How should the equipment be accepted after installation?
Use a documented site-acceptance test covering alignment, guards, emergency stops, interlocks, dry running, representative load, cleaning access, leakage or drainage, operator training and delivery of manuals and spares.
What information is needed to select this equipment?
Provide species, full live-weight and size range, required rate, animal handling procedure, operator position, entry/exit interfaces and destination requirements. Safety arrangements and the applicable procedure require project-specific engineering confirmation.
Are these specifications an approved supply commitment?
No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.
Related configurations and guidance
Reference specification and document status
Download HT-P106-III reference specification and verification checklist
This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.