SlaughterPro | HUATAOSearch

Dynamic Track Electronic Weighing System | HT-P505-I

Dynamic Track Electronic Weighing System. Compare load range, weighing method and line interfaces; share your requirements for configuration review.

Dynamic Track Electronic Weighing System | HT-P505-I — supplied product-directory equipment/process illustration; exact model configuration must be confirmed

Supplied product-directory reference image: equipment family or process context. It is not proof of an exact model, HUATAO installation or certification. Confirm the proposed configuration photograph and drawing before ordering.

Specification notes

ModelHT-P505-I
Differentiate Capacity50g
Component and material1)Stainless steel connectors and bolts 2)Stainless steel tube rail (φ60*4mm) or dual-orbit rail( 40*40*4mm) or flat rail (60*10mm) 3)High precision sensors (2Pcs) 4)Weighing display with printer 5)LCD digital display
Data statusSource reference R1; configuration requires written confirmation

Use and process role

The Dynamic Track Electronic Weighing System is designed as an in-line weighing point for live pigs, carcasses or rail-borne product. It should be treated as part of the process flow, not as a stand-alone catalogue item. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for comparison. For export quotations, confirm voltage, materials, guarding, spare parts and documentation before the purchase order is released.

Structure and working principle

Load cells measure the weight while the animal or carrier is stationary or moving through the defined weighing section. The indicator converts the signal into a displayed or transmitted value for production and traceability records. During commissioning, the sequence should be tested first without product and then under a representative load.

Source-listed construction and features

Capacity and division suited to the load

Stable mechanical isolation

Wash-down-compatible load cells

Indicator positioned for the operator

Data output options

Calibration access

Applications and integration

The usual application is live-pig reception, carcass grading, production reporting and dispatch control. It can be specified for a new line or adapted to a retrofit, provided that the existing supports, working heights, utilities and control signals are measured on site. Plants handling several pig sizes should state the full range rather than quoting only an average.

Selection conditions and project fit

Specify maximum and minimum load, required division, static or dynamic operation, line speed, calibration requirements and the data interface. Confirm any legal-for-trade requirement separately.

Evidence, configuration and document status

The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.

Source and version

Reference compilation R1, 2026-11-16. Supplied document: 2. 烫脱毛,剥皮,掏脏设备.doc; section 2.11. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.

Installation and process interfaces

Specify rail/platform geometry, mechanical isolation, stable support, transfer height and access for calibration. State static or dynamic weighing and the required data connection.

Utilities, control and feedback requirements

Ask which indicator, sensor and output signals are included. State the required division and destination-specific verification needs; no legal-for-trade approval is established by a generic reference.

Maintenance and part identification

Request the configuration-specific manual and part references for load cells, indicator, cables and mounting components. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.

Configuration-specific document checklist

Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.

Compare configurations for your project

For Dynamic Track Electronic Weighing System | HT-P505-I, keep the complete identifier HT-P505-I attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.

Start with this page's listed reference fields: Differentiate Capacity: 50g; Component and material: 1)Stainless steel connectors and bolts 2)Stainless steel tube rail (φ60*4mm) or dual-orbit rail( 40*40*4mm) or flat rail (60*10mm) 3)High precision sensors (2Pcs) 4)Weighing display with printer 5)LCD digital display. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.

Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.

Purchasing review and enquiry preparation

Start with Dynamic Track Electronic Weighing System | HT-P505-I and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.

Use the linked pig processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.

Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-P505-I and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.

Source reference configuration 1
ParameterReference Value / Buyer Check
ModelHT-P505-I
ApplicationWhich is used to weight pig half carcass
Weight rail length1000 mm
Maximum Weight300 Kg
Differentiate Capacity50g
Component and material1)Stainless steel connectors and bolts 2)Stainless steel tube rail (φ60*4mm) or dual-orbit rail( 40*40*4mm) or flat rail (60*10mm) 3)High precision sensors (2Pcs) 4)Weighing display with printer 5)LCD digital display
Quotation controlSpecify maximum load, minimum division, static or dynamic operation, platform or rail dimensions, legal-for-trade requirement and the target software interface.

Buyer FAQ

What information is needed to quote the Dynamic Track Electronic Weighing System?

Specify maximum load, minimum division, static or dynamic operation, platform or rail dimensions, legal-for-trade requirement and the target software interface.

Which spare parts should be ordered with the machine?

Start with the normal wear and hygiene parts for this duty: bearings, seals, sensors, chains or belts, nozzles, blades, scrapers, pneumatic parts and electrical protection devices as applicable. The supplier should issue a model-specific list.

Are the published technical figures final?

No. The table records reference information from the citedHTpage. Capacity, power, dimensions, material grade and utilities must be confirmed on the quotation and approved drawing.

How should the equipment be accepted after installation?

Use a documented site-acceptance test covering alignment, guards, emergency stops, interlocks, dry running, representative load, cleaning access, leakage or drainage, operator training and delivery of manuals and spares.

What information is needed to select this equipment?

Specify maximum and minimum load, required division, static or dynamic operation, line speed, calibration requirements and the data interface. Confirm any legal-for-trade requirement separately.

Are these specifications an approved supply commitment?

No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.

Related configurations and guidance

Pig processing equipment categories Pig processing process application Check complete model identifiers and suffixes

Reference specification and document status

Download HT-P505-I reference specification and verification checklist

This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.

Applications

Pig processing workflowExplore pig processing by process task, source equipment and project conditions.

Capabilities

Pig processing line planningExplore pig processing by process task, source equipment and project conditions.

Request specifications

Add company or technical details (optional)

Equipment under review: HT-P505-I

Start with what you know. You can send drawings or photographs by email.

Continue your technical review

Pig processing processCompare published equipmentPrepare quotation informationSupplier verification checklistIdentify related replacement parts