Pig Carcass Band Splitting Saw | HT-P502
Pig Carcass Band Splitting Saw. Compare input range, required output and working interfaces; share your requirements for configuration review.

Specification notes
| Model | HT-P502 |
|---|---|
| Voltage | 380V / 3 Phase / 50Hz |
| Motor Power | 2.2 kW |
| Capacity | 200–400 pigs/hour |
| Structure Material | Stainless Steel |
| Data status | Source reference R1; configuration requires written confirmation |
Use and process role
The Pig Carcass Band Splitting Saw is a professional cutting machine designed for splitting pig carcasses into two symmetrical halves after the slaughter and evisceration process.
Combining European precision design concepts with optimized manufacturing technology, this machine provides stable cutting performance, excellent durability and efficient operation for modern pork processing plants.
The equipment is mainly installed on the carcass splitting section of a pig slaughter line. It uses a high-strength saw blade system to achieve a straight and smooth cutting process while reducing bone damage and improving carcass appearance.
Designed with food hygiene requirements in mind, the machine features a stainless steel structure, easy-clean surfaces and components suitable for daily washing and sterilization.
It is suitable for medium and large-scale pig abattoirs requiring continuous production, reliable performance and convenient maintenance.
Structure and working principle
The Pig Carcass Band Splitting Saw works through a continuously running band saw blade driven by a high-efficiency motor.
During operation, the pig carcass is positioned accurately on the conveyor or working support. The rotating saw blade passes through the carcass center line and completes the splitting process with stable cutting speed.
After operation, the blade and cutting area can be cleaned and sterilized according to the slaughterhouse hygiene procedure.
The optimized structure ensures:
Smooth carcass splitting
Reduced cutting resistance
Stable operation under continuous production
Easy blade replacement and maintenance
Source-listed construction and features
1. High Precision Carcass Splitting
The rigid structure and accurate blade positioning ensure consistent splitting quality and reduce uneven cuts.
2. Stainless Steel Hygienic Design
Food-grade stainless steel construction provides:
Corrosion resistance
Easy cleaning
Long service life
3. High-Efficiency Cutting System
The powerful motor and optimized blade design allow continuous operation for high-volume pork processing.
4. Safe Operating Structure
The machine integrates:
Protective guards
Stable support system
Emergency stop protection
Operator safety design
5. Easy Maintenance
The modular design allows convenient replacement of:
Saw blades
Bearings
Electrical components
Wearing parts
Applications and integration
The Pig Carcass Band Splitting Saw is widely used in:
Pig slaughterhouses
Pork processing plants
Meat cutting factories
Industrial abattoir production lines
Typical installation position:
Bleeding → Scalding → Dehairing → Evisceration → Carcass Washing → Carcass Splitting → Cutting & Deboning
It can be integrated into:
Automatic slaughter lines
Semi-automatic processing lines
Existing pork production systems
Selection conditions and project fit
State incoming product size and temperature, target cut or separation, rate, output specification, interfaces, blade or tool arrangement and guarding requirements. Agree a representative-product trial and the acceptance criteria.
Evidence, configuration and document status
The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.
Source and version
Reference compilation R1, 2026-11-16. Supplied document: 2. 烫脱毛,剥皮,掏脏设备.doc; section 2.12. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.
Installation and process interfaces
Provide product size and condition, target cut or separation, feed/discharge direction, support height and space for tool replacement and maintenance. Confirm the proposed guards, operator access and connection to the receiving station.
Utilities, control and feedback requirements
Check the model-specific drive and electrical or fluid-power supply. Agree start/stop, upstream/downstream interlocks and feedback requirements where relevant. Do not infer a control protocol or tool capability from a family photograph.
Maintenance and part identification
Request the configuration-specific manual and part references for matched blades or tools, drive components, seals and position sensors where fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.
Configuration-specific document checklist
Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.
Compare configurations for your project
For Pig Carcass Band Splitting Saw | HT-P502, keep the complete identifier HT-P502 attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.
Start with this page's listed reference fields: Voltage: 380V / 3 Phase / 50Hz; Motor Power: 2.2 kW; Capacity: 200–400 pigs/hour; Structure Material: Stainless Steel. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.
Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.
Purchasing review and enquiry preparation
Start with Pig Carcass Band Splitting Saw | HT-P502 and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.
Use the linked pig processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.
Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-P502 and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.
| Parameter | Specification |
|---|---|
| Product Name | Pig Carcass Band Splitting Saw |
| Model | HT-P502 Series |
| Application | Pig carcass splitting into half parts |
| Voltage | 380V / 3 Phase / 50Hz |
| Motor Power | 2.2 kW |
| Capacity | 200–400 pigs/hour |
| Blade Length | 2790 mm |
| Cutting Depth | 360 mm |
| Structure Material | Stainless Steel |
| Blade Type | Band Saw Blade |
| Installation | Pig slaughter line / cutting room |
Buyer FAQ
1. What is the capacity of this pig carcass splitting saw?
The standard HT-P502 series provides approximately 200–400 pigs/hour depending on configuration and production requirements.
3. What spare parts are recommended?
Common spare parts include: Saw blades Bearings Motors Electrical components Protective parts
5. How often should the saw blade be replaced?
Blade replacement depends on: Pig size Daily production volume Bone hardness Operating conditions
What information is needed to select this equipment?
State incoming product size and temperature, target cut or separation, rate, output specification, interfaces, blade or tool arrangement and guarding requirements. Agree a representative-product trial and the acceptance criteria.
Are these specifications an approved supply commitment?
No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.
Related configurations and guidance
Reference specification and document status
Download HT-P502 reference specification and verification checklist
This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.