SlaughterPro | HUATAOSearch

Screw-Type Pig Carcass Dehairing Machine | HT-P207

Screw-Type Pig Carcass Dehairing Machine. Compare incoming condition, product range and processing duty; share your requirements for configuration review.

Screw-Type Pig Carcass Dehairing Machine — source product-family photograph; confirm the quoted configuration

Specification notes

ModelHT-P207
Rated voltage / phase / frequency380v / 3p / 50hz
Power16.5KW
Out size3860*2130*2550mm(L*W*H)
Capacity300-600pig per hour
Loading weight≤250Kg
Component and material1) Hot galvanized or stainless steel main frame 2) Stainless steel plate 1mm shell 3) Precision casting, surface by spraying 4) High quality rubber dehairing sheet
Data statusSource reference R1; configuration requires written confirmation

Use and process role

In a pig plant, the Screw-Type Pig Carcass Dehairing Machine serves as a mechanical hair-removal machine for scalded pig carcasses, heads or hooves. The final build must match the actual product load, room layout and cleaning routine at site. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for comparison. For export quotations, confirm voltage, materials, guarding, spare parts and documentation before the purchase order is released.

Structure and working principle

Rotating drums, paddles, scrapers or beaters contact the scalded surface and lift loosened hair. Water flushes hair away while the machine controls dwell time and product movement toward discharge. Operators need a clear stop-and-recovery routine for a jam, tool change or hygiene break.

Source-listed construction and features

Duty matched to product size and throughput

Replaceable scraping or beating elements

Contained hair and water discharge

Openable guards for cleaning

Drive protection against overload

Straightforward wear-part replacement

Applications and integration

The usual application is small batch plants through high-capacity continuous pig slaughter lines. It can be specified for a new line or adapted to a retrofit, provided that the existing supports, working heights, utilities and control signals are measured on site. Plants handling several pig sizes should state the full range rather than quoting only an average.

Selection conditions and project fit

State species, incoming weight and temperature range, upstream scalding condition, required rate, discharge height, water or energy supply and by-product collection. Agree product quality criteria under the actual input conditions.

Evidence, configuration and document status

The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.

Source and version

Reference compilation R1, 2026-11-16. Supplied document: 2. 烫脱毛,剥皮,掏脏设备.doc; section 2.25. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.

Installation and process interfaces

State the upstream scalding/preparation condition, animal or product range, required rate, discharge height, water or energy connections and collection of hair, feathers or other by-products.

Utilities, control and feedback requirements

Confirm the actual drive arrangement, adjustment range and control scope. Compare performance only under defined input and process conditions; reference rates are not an unconditional yield or quality commitment.

Maintenance and part identification

Request the configuration-specific manual and part references for fingers, rubber elements, scrapers, rollers and drive parts where fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.

Configuration-specific document checklist

Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.

Compare configurations for your project

For Screw-Type Pig Carcass Dehairing Machine | HT-P207, keep the complete identifier HT-P207 attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.

Start with this page's listed reference fields: Rated voltage / phase / frequency: 380v / 3p / 50hz; Power: 16.5KW; Out size: 3860*2130*2550mm(L*W*H); Capacity: 300-600pig per hour; Loading weight: ≤250Kg. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.

Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.

Purchasing review and enquiry preparation

Start with Screw-Type Pig Carcass Dehairing Machine | HT-P207 and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.

Use the linked pig processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.

Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-P207 and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.

Source reference configuration 1
ParameterReference Value / Buyer Check
ModelHT-P207
ApplicationWhich main used to remove pig hair when after scalding from steam scalding channel, and main used in big capacity pig slaughterhouse
Rated voltage / phase / frequency380v / 3p / 50hz
Power16.5KW
Out size3860*2130*2550mm(L*W*H)
Capacity300-600pig per hour
Loading weight≤250Kg
Dehair effective length3 .8X2m
Dehairing rate≥90
Bone broken rate≤2%
Water consumption≤2000Kg/H
Component and material1) Hot galvanized or stainless steel main frame 2) Stainless steel plate 1mm shell 3) Precision casting, surface by spraying 4) High quality rubber dehairing sheet
Quotation controlState scalding method, product weight range, heads per hour, batch size, available water, hair collection route, motor standard and the required discharge height.

Buyer FAQ

What information is needed to quote the Screw-Type Pig Carcass Dehairing Machine?

State scalding method, product weight range, heads per hour, batch size, available water, hair collection route, motor standard and the required discharge height.

Which spare parts should be ordered with the machine?

Start with the normal wear and hygiene parts for this duty: bearings, seals, sensors, chains or belts, nozzles, blades, scrapers, pneumatic parts and electrical protection devices as applicable. The supplier should issue a model-specific list.

Are the published technical figures final?

No. The table records reference information from the citedHTpage. Capacity, power, dimensions, material grade and utilities must be confirmed on the quotation and approved drawing.

How should the equipment be accepted after installation?

Use a documented site-acceptance test covering alignment, guards, emergency stops, interlocks, dry running, representative load, cleaning access, leakage or drainage, operator training and delivery of manuals and spares.

What information is needed to select this equipment?

State species, incoming weight and temperature range, upstream scalding condition, required rate, discharge height, water or energy supply and by-product collection. Agree product quality criteria under the actual input conditions.

Are these specifications an approved supply commitment?

No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.

Related configurations and guidance

Pig processing equipment categories Pig processing process application Check complete model identifiers and suffixes

Reference specification and document status

Download HT-P207 reference specification and verification checklist

This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.

Applications

Pig processing workflowExplore pig processing by process task, source equipment and project conditions.

Capabilities

Pig processing line planningExplore pig processing by process task, source equipment and project conditions.

Request specifications

Add company or technical details (optional)

Equipment under review: HT-P207

Start with what you know. You can send drawings or photographs by email.

Continue your technical review

Pig processing processCompare published equipmentPrepare quotation informationSupplier verification checklistIdentify related replacement parts