SlaughterPro | HUATAOSearch

Pig Carcass Electric Scalding Tank | HT-P201-I

Pig Carcass Electric Scalding Tank. Compare product range, residence time and utility conditions; share your requirements for configuration review.

Pig Carcass Electric Scalding Tank — source product-family photograph; confirm the quoted configuration

Specification notes

ModelHT-P201-I
Rated voltage / phase / frequency380v / 3p / 50hz
Power30Kw
Out size3000*2000*800mm(L*W*H)
Component and material1) Stainless steel square steel main frame 2) 80mm polyurethane insulation layer 3) 2mm 304 Stainless steel plate shell 4) 30kw stainless steel electric heating rod 5) Drain valve 6) Temperature control system
Data statusSource reference R1; configuration requires written confirmation

Use and process role

This Pig Carcass Electric Scalding Tank is specified for one practical job: a heated-water system that conditions pig skin, heads or hooves before mechanical hair removal. A reliable installation begins with correct interface dimensions and a realistic duty cycle. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for comparison. For export quotations, confirm voltage, materials, guarding, spare parts and documentation before the purchase order is released.

Structure and working principle

Product is immersed, sprayed or conveyed through controlled hot water for a set time. Temperature and exposure loosen hair without unnecessary heat damage, after which the item moves directly to the dehairing step. The upstream machine must not feed faster than the receiving station can clear.

Source-listed construction and features

Stable scalding temperature

Exposure time matched to the product

Insulated tank or enclosure options

Controlled overflow and drainage

Safe loading and discharge

Access for sediment removal

Applications and integration

The usual application is pig carcass, head and hoof preparation lines ahead of dehairing or finishing. It can be specified for a new line or adapted to a retrofit, provided that the existing supports, working heights, utilities and control signals are measured on site. Plants handling several pig sizes should state the full range rather than quoting only an average.

Selection conditions and project fit

Define product size, residence time, line speed, water quality, temperature, pressure, flow and drainage. Specify the hygiene process and acceptance method; a machine name does not establish a validated hygiene result.

Evidence, configuration and document status

The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.

Source and version

Reference compilation R1, 2026-11-16. Supplied document: 2. 烫脱毛,剥皮,掏脏设备.doc; section 2.26. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.

Installation and process interfaces

State incoming product condition, process residence time, line speed, working height, water connections, drain location and access for cleaning or component removal. Check the full installation envelope, not only catalogue dimensions.

Utilities, control and feedback requirements

Use only the power, water, heating or cooling values given for the matching source configuration. Confirm operating pressure/flow or temperature, control method and line signals. A reference machine does not establish a validated hygiene or cooling result.

Maintenance and part identification

Request the configuration-specific manual and part references for nozzles, seals, pumps, sensors, conveying elements and any heating/cooling components fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.

Configuration-specific document checklist

Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.

Source-unit confirmation required

The supplied reference does not explicitly state a unit for these fields: Scalding temperature. The original entries are retained rather than assigning an assumed unit. Confirm the units, matching configuration and operating conditions before comparing these figures or approving a quotation.

Compare configurations for your project

For Pig Carcass Electric Scalding Tank | HT-P201-I, keep the complete identifier HT-P201-I attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.

Start with this page's listed reference fields: Rated voltage / phase / frequency: 380v / 3p / 50hz; Power: 30Kw; Out size: 3000*2000*800mm(L*W*H); Component and material: 1) Stainless steel square steel main frame 2) 80mm polyurethane insulation layer 3) 2mm 304 Stainless steel plate shell 4) 30kw stainless steel electric heating rod 5) Drain valve 6) Temperature control system. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.

Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.

Purchasing review and enquiry preparation

Start with Pig Carcass Electric Scalding Tank | HT-P201-I and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.

Use the linked pig processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.

Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-P201-I and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.

Source reference configuration 1
ParameterReference Value / Buyer Check
ModelHT-P201-I
ApplicationWhich main used to scald pig carcass for dehairing
Working principleelectric
Rated voltage / phase / frequency380v / 3p / 50hz
Power30Kw
Scalding temperature58-62℃
Out size3000*2000*800mm(L*W*H)
Component and material1) Stainless steel square steel main frame 2) 80mm polyurethane insulation layer 3) 2mm 304 Stainless steel plate shell 4) 30kw stainless steel electric heating rod 5) Drain valve 6) Temperature control system
Quotation controlConfirm product size, batch or continuous duty, capacity, target temperature, heat source, water volume, make-up rate, exhaust and effluent arrangements.

Buyer FAQ

What information is needed to quote the Pig Carcass Electric Scalding Tank?

Confirm product size, batch or continuous duty, capacity, target temperature, heat source, water volume, make-up rate, exhaust and effluent arrangements.

Which spare parts should be ordered with the machine?

Start with the normal wear and hygiene parts for this duty: bearings, seals, sensors, chains or belts, nozzles, blades, scrapers, pneumatic parts and electrical protection devices as applicable. The supplier should issue a model-specific list.

Are the published technical figures final?

No. The table records reference information from the citedHTpage. Capacity, power, dimensions, material grade and utilities must be confirmed on the quotation and approved drawing.

How should the equipment be accepted after installation?

Use a documented site-acceptance test covering alignment, guards, emergency stops, interlocks, dry running, representative load, cleaning access, leakage or drainage, operator training and delivery of manuals and spares.

What information is needed to select this equipment?

Define product size, residence time, line speed, water quality, temperature, pressure, flow and drainage. Specify the hygiene process and acceptance method; a machine name does not establish a validated hygiene result.

Are these specifications an approved supply commitment?

No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.

Related configurations and guidance

Pig processing equipment categories Pig processing process application Check complete model identifiers and suffixes

Reference specification and document status

Download HT-P201-I reference specification and verification checklist

This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.

Applications

Pig processing workflowExplore pig processing by process task, source equipment and project conditions.

Capabilities

Pig processing line planningExplore pig processing by process task, source equipment and project conditions.

Request specifications

Add company or technical details (optional)

Equipment under review: HT-P201-I

Start with what you know. You can send drawings or photographs by email.

Continue your technical review

Pig processing processCompare published equipmentPrepare quotation informationSupplier verification checklistIdentify related replacement parts