SlaughterPro | HUATAOSearch

Pig Stomach and Tripe Cleaning Machine | HT-P617

Pig Stomach and Tripe Cleaning Machine. Compare product range, residence time and utility conditions; share your requirements for configuration review.

Pig Stomach and Tripe Cleaning Machine — source product-family photograph; confirm the quoted configuration

Specification notes

ModelHT-P617
Rated voltage/Phase/Frequency380V/3P/50HZ
Power4.5kw
Out size1830*720*1140 mm(L*W*H)
Capacity300Pieces / hour
Component and material1)Stainless steel frame base and barrel type washing chamber and circular rotary grid 2)Set hot and cold water inlet pipe 3)Stainless steel waterproof electric control box
Data statusSource reference R1; configuration requires written confirmation

Use and process role

In a pig plant, the Pig Stomach and Tripe Cleaning Machine serves as a hygienic machine or workstation for transferring, washing, scraping, draining, inspecting or packing edible offal. The final build must match the actual product load, room layout and cleaning routine at site. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for comparison. For export quotations, confirm voltage, materials, guarding, spare parts and documentation before the purchase order is released.

Structure and working principle

Offal is loaded into the working area and moved, agitated, scraped or rinsed according to the task. Water and residues leave through a controlled drain or collection point, while cleaned product exits to inspection, chilling or packing. Operators need a clear stop-and-recovery routine for a jam, tool change or hygiene break.

Source-listed construction and features

Separate routing for the specified offal stream

Smooth food-contact surfaces

Controlled water and residue discharge

Safe access for loading and unloading

Cleaning access around moving parts

Layout compatible with inspection flow

Applications and integration

The usual application is white-offal and red-offal rooms in pig abattoirs and pork processing plants. It can be specified for a new line or adapted to a retrofit, provided that the existing supports, working heights, utilities and control signals are measured on site. Plants handling several pig sizes should state the full range rather than quoting only an average.

Selection conditions and project fit

Define product size, residence time, line speed, water quality, temperature, pressure, flow and drainage. Specify the hygiene process and acceptance method; a machine name does not establish a validated hygiene result.

Evidence, configuration and document status

The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.

Source and version

Reference compilation R1, 2026-11-16. Supplied document: 2. 烫脱毛,剥皮,掏脏设备.doc; section 2.5. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.

Installation and process interfaces

State incoming product condition, process residence time, line speed, working height, water connections, drain location and access for cleaning or component removal. Check the full installation envelope, not only catalogue dimensions.

Utilities, control and feedback requirements

Use only the power, water, heating or cooling values given for the matching source configuration. Confirm operating pressure/flow or temperature, control method and line signals. A reference machine does not establish a validated hygiene or cooling result.

Maintenance and part identification

Request the configuration-specific manual and part references for nozzles, seals, pumps, sensors, conveying elements and any heating/cooling components fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.

Configuration-specific document checklist

Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.

Source-unit confirmation required

The supplied reference does not explicitly state a unit for these fields: Water temperature. The original entries are retained rather than assigning an assumed unit. Confirm the units, matching configuration and operating conditions before comparing these figures or approving a quotation.

Compare configurations for your project

For Pig Stomach and Tripe Cleaning Machine | HT-P617, keep the complete identifier HT-P617 attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.

Start with this page's listed reference fields: Rated voltage/Phase/Frequency: 380V/3P/50HZ; Power: 4.5kw; Out size: 1830*720*1140 mm(L*W*H); Capacity: 300Pieces / hour; Component and material: 1)Stainless steel frame base and barrel type washing chamber and circular rotary grid 2)Set hot and cold water inlet pipe 3)Stainless steel waterproof electric control box. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.

Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.

Purchasing review and enquiry preparation

Start with Pig Stomach and Tripe Cleaning Machine | HT-P617 and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.

Use the linked pig processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.

Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-P617 and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.

Source reference configuration 1
ParameterReference Value / Buyer Check
ModelHT-P617
ApplicationWhich main used to clean pig stomach
Rated voltage/Phase/Frequency380V/3P/50HZ
Power4.5kw
Water temperature55-60 ℃
Out size1830*720*1140 mm(L*W*H)
Water consume750L/H
Capacity300Pieces / hour
Component and material1)Stainless steel frame base and barrel type washing chamber and circular rotary grid 2)Set hot and cold water inlet pipe 3)Stainless steel waterproof electric control box
Quotation controlIdentify the organ or product, hourly load, batch size, cleaning result, water pressure, drain, working height and destination after the operation. Do not combine red and white offal routes without a hygiene review.

Buyer FAQ

What information is needed to quote the Pig Stomach and Tripe Cleaning Machine?

Identify the organ or product, hourly load, batch size, cleaning result, water pressure, drain, working height and destination after the operation. Do not combine red and white offal routes without a hygiene review.

Which spare parts should be ordered with the machine?

Start with the normal wear and hygiene parts for this duty: bearings, seals, sensors, chains or belts, nozzles, blades, scrapers, pneumatic parts and electrical protection devices as applicable. The supplier should issue a model-specific list.

Are the published technical figures final?

No. The table records reference information from the citedHTpage. Capacity, power, dimensions, material grade and utilities must be confirmed on the quotation and approved drawing.

How should the equipment be accepted after installation?

Use a documented site-acceptance test covering alignment, guards, emergency stops, interlocks, dry running, representative load, cleaning access, leakage or drainage, operator training and delivery of manuals and spares.

What information is needed to select this equipment?

Define product size, residence time, line speed, water quality, temperature, pressure, flow and drainage. Specify the hygiene process and acceptance method; a machine name does not establish a validated hygiene result.

Are these specifications an approved supply commitment?

No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.

Related configurations and guidance

Pig processing equipment categories Pig processing process application Check complete model identifiers and suffixes

Reference specification and document status

Download HT-P617 reference specification and verification checklist

This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.

Applications

Pig processing workflowExplore pig processing by process task, source equipment and project conditions.

Capabilities

Pig processing line planningExplore pig processing by process task, source equipment and project conditions.

Request specifications

Add company or technical details (optional)

Equipment under review: HT-P617

Start with what you know. You can send drawings or photographs by email.

Continue your technical review

Pig processing processCompare published equipmentPrepare quotation informationSupplier verification checklistIdentify related replacement parts