Poultry Evisceration Chute for Viscera Collection and Transport System | HT-EC
Poultry Evisceration Chute for Viscera Collection and Transport System. Compare load range, dimensions and process interfaces; share your requirements for configuration review.

Specification notes
| Model | HT-EC |
|---|---|
| Material | SUS304 Stainless Steel |
| Processing Capacity | 3000-12000 BPH |
| Collected Materials | Heart, Liver, Gizzard, Intestines |
| Material Standard | Food Processing Grade |
| Capacity Range | 3000-12000 Birds/Hour |
| Data status | Source reference R1; configuration requires written confirmation |
Use and process role
The Poultry Evisceration Chute is an important auxiliary component installed in the evisceration section of modern poultry processing lines.
During evisceration, internal organs are removed from poultry carcasses by manual or automatic equipment. The removed viscera and giblets need to be collected and transferred quickly to maintain a clean working environment and ensure continuous production.
Huatao evisceration chute provides a hygienic collection and transportation solution for:
Chicken
Broiler
Duck
Turkey
Goose
It is mainly used for collecting:
Heart
Liver
Gizzard
Intestines
Other edible giblets and processing by-products
The chute is installed below or beside the evisceration working area, allowing removed materials to enter the collection and handling system efficiently.
Compared with manual collection methods, the evisceration chute helps poultry processors improve:
Workplace hygiene
Processing efficiency
Product recovery rate
Labor utilization
In modern poultry processing plants, evisceration systems are designed as a complete process including vent opening, organ removal, giblet harvesting and collection systems.
Structure and working principle
The poultry evisceration chute works as a receiving and transportation channel during the evisceration process.
During operation:
Poultry carcasses move through the evisceration line.
Internal organs are removed by operators or automatic evisceration machines.
Removed viscera and giblets fall or are guided into the chute.
The inclined or continuous conveying structure transports materials to the collection area.
Edible giblets can be further processed, while waste materials are separated.
The design ensures smooth material flow and reduces accumulation in the evisceration area.
Source-listed construction and features
1. Designed for Poultry Evisceration Systems
Specially developed for:
Chicken processing lines
Duck processing plants
Turkey slaughterhouses
Goose processing facilities
2. Efficient Viscera Collection
The chute provides continuous collection of:
Giblets
Organs
Offal materials
reducing manual handling requirements.
3. Food Grade Stainless Steel Construction
Main structure uses SUS304 stainless steel.
Applications and integration
The poultry evisceration chute is mainly applied in the evisceration processing section of poultry slaughterhouses.
After carcass opening and internal organ removal, the removed viscera need to be collected and transferred efficiently.
The system is suitable for:
Chicken slaughterhouses
Broiler processing plants
Duck processing factories
Turkey processing facilities
Goose processing plants
Typical applications include:
Giblet recovery systems
Viscera collection lines
Evisceration inspection areas
Poultry by-product handling systems
The equipment helps maintain a cleaner processing environment and supports continuous poultry production.
Selection conditions and project fit
Provide rail or belt dimensions, working height, travel direction, carrier spacing, load range, speed and upstream/downstream connection drawings. A similar-looking carrier is not proof of fit.
Evidence, configuration and document status
The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.
Source and version
Reference compilation R1, 2026-11-16. Supplied document: 3. Evisceration(去内脏系统).doc; section 3.2. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.
Installation and process interfaces
Provide the load and product range, travel direction, rail/belt section or mating geometry, working heights, supports and maintenance clearances. Similar appearance is not proof of fit.
Utilities, control and feedback requirements
For powered equipment, confirm the matching drive, supply, control and line signals. For passive components, confirm mechanical interfaces and any requirements of the receiving equipment; no powered or feedback capability should be assumed.
Maintenance and part identification
Request the configuration-specific manual and part references for rollers, chains, hooks, bearings, guides and drive elements where applicable. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.
Configuration-specific document checklist
Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.
Compare configurations for your project
For Poultry Evisceration Chute for Viscera Collection and Transport System | HT-EC, keep the complete identifier HT-EC attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.
Start with this page's listed reference fields: Material: SUS304 Stainless Steel; Processing Capacity: 3000-12000 BPH; Collected Materials: Heart, Liver, Gizzard, Intestines; Material Standard: Food Processing Grade; Capacity Range: 3000-12000 Birds/Hour. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.
Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.
Purchasing review and enquiry preparation
Start with Poultry Evisceration Chute for Viscera Collection and Transport System | HT-EC and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.
Use the linked poultry processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.
Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-EC and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.
| Parameter | Specification |
|---|---|
| Product Name | Poultry Evisceration Chute |
| Brand | Huatao |
| Model | HT-EC Series |
| Application | Viscera Collection During Evisceration |
| Suitable Poultry | Chicken, Duck, Turkey, Goose |
| Processing Section | Evisceration System |
| Main Function | Giblet & Offal Collection |
| Material | SUS304 Stainless Steel |
| Surface Finish | Food Grade Smooth Surface |
| Structure Type | Stainless Steel Guide Chute |
| Installation Position | Under Evisceration Working Area |
| Compatible Equipment | Eviscerator / Giblet Handling System |
| Chute Length | Customized |
| Chute Width | Customized |
| Processing Capacity | 3000-12000 BPH |
| Cleaning Method | Water Washing |
| Installation Type | Integrated Processing Line |
| Item | Specification |
|---|---|
| Application | Poultry Evisceration Section |
| Processed Species | Chicken / Duck / Turkey / Goose |
| Collected Materials | Heart, Liver, Gizzard, Intestines |
| Operation Mode | Continuous Collection |
| Material Standard | Food Processing Grade |
| Capacity Range | 3000-12000 Birds/Hour |
Buyer FAQ
What is a poultry evisceration chute?
It is a collection and transport device used in poultry evisceration systems for handling removed viscera and giblets.
Where is the evisceration chute installed?
It is normally installed below the evisceration working area or connected with the giblet handling system.
What poultry species can use this equipment?
It is suitable for: Chicken Broiler Duck Turkey Goose
What materials can be collected?
Mainly: Heart Liver Gizzard Intestines Other poultry offal
What material is the chute made of?
Usually SUS304 food-grade stainless steel.
What information is needed to select this equipment?
Provide rail or belt dimensions, working height, travel direction, carrier spacing, load range, speed and upstream/downstream connection drawings. A similar-looking carrier is not proof of fit.
Are these specifications an approved supply commitment?
No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.
Related configurations and guidance
Reference specification and document status
Download HT-EC reference specification and verification checklist
This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.