SlaughterPro | HUATAOSearch

Industrial Spiral Pre-Chiller Machine for Poultry Processing Line

Industrial Spiral Pre-Chiller Machine. Compare product range, residence time and utility conditions; share your requirements for configuration review.

Industrial Spiral Pre-Chiller Machine for Poultry Processing Line — source product-family photograph; confirm the quoted configuration

Specification notes

Model statusProduct family; exact model not identified in the supplied section
MaterialSUS304 Stainless Steel
Capacity Range500–13,500 BPH
Motor Power5–20 kW
Voltage220V / 380V / Customized
Data statusSource reference R1; configuration requires written confirmation

Use and process role

Stainless Steel Screw Chiller System for Chicken, Duck and Turkey Slaughterhouse

The Industrial Spiral Pre-Chiller Machine is an essential cooling system used after evisceration in modern poultry processing plants.

After slaughtering, scalding, defeathering and evisceration, poultry carcasses need rapid temperature reduction before cutting, grading, packaging or freezing. This spiral pre-chilling system uses a continuous screw conveying structure combined with chilled water circulation and air agitation technology to achieve uniform cooling performance.

The machine is manufactured with food-grade 304 stainless steel, providing excellent corrosion resistance, hygienic performance and long service life in wet processing environments.

Compared with traditional open water tanks, the spiral design requires less installation space while providing longer chilling time and continuous processing capacity. It can be customized according to production requirements, including chicken, duck, goose and turkey processing lines.

Structure and working principle

The poultry carcasses enter the spiral pre-chiller after the evisceration process.

Inside the stainless steel chilling tank, a rotating spiral screw continuously pushes the carcasses forward while they are immersed in chilled water or ice water.

At the same time, the air agitation system creates water movement around the carcasses, improving heat exchange efficiency and ensuring even cooling.

The refrigeration system maintains the water temperature within the required range. During transportation through the spiral channel, the carcass temperature gradually decreases until reaching the target cooling level before entering the next processing stage.

Source-listed construction and features

1. Food Grade Stainless Steel Construction

Entire machine frame and tank made of SUS304 stainless steel

Corrosion resistant and easy to clean

Suitable for continuous operation in poultry processing environments

2. Efficient Spiral Cooling Design

Long cooling path within limited factory space

Adjustable chilling residence time

Uniform temperature reduction for every carcass

3. High Cooling Performance

Combined water circulation and air agitation technology

Improved heat transfer efficiency

Reduces carcass temperature quickly after processing

4. Flexible Production Capacity

Suitable for different poultry processing capacities:

Small processing plants

Medium slaughterhouses

Large automated poultry processing factories

Capacity and tank diameter can be customized according to production requirements.

5. Easy Integration into Processing Lines

The machine can be connected with:

Evisceration line

Carcass transfer conveyor

Cut-up line

Grading system

Packaging line

Applications and integration

The spiral pre-chiller is mainly installed in the cooling section of poultry slaughtering and processing plants.

Typical applications include:

Chicken slaughterhouses

Duck processing factories

Turkey processing facilities

Frozen poultry production plants

Fresh poultry meat processing lines

The equipment is normally positioned after:

Evisceration → Inspection → Pre-Chilling → Cutting / Grading → Packaging

For frozen poultry products, water chilling is widely used because it provides fast cooling efficiency and stable production speed. Air chilling systems are also used for certain fresh poultry products where lower water absorption is required.

Selection conditions and project fit

Define product size, residence time, line speed, water quality, temperature, pressure, flow and drainage. Specify the hygiene process and acceptance method; a machine name does not establish a validated hygiene result.

Evidence, configuration and document status

The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.

Source and version

Reference compilation R1, 2026-11-16. Supplied document: 4. 预冷设备 chilling.doc; section 4.1. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.

Installation and process interfaces

State incoming product condition, process residence time, line speed, working height, water connections, drain location and access for cleaning or component removal. Check the full installation envelope, not only catalogue dimensions.

Utilities, control and feedback requirements

Use only the power, water, heating or cooling values given for the matching source configuration. Confirm operating pressure/flow or temperature, control method and line signals. A reference machine does not establish a validated hygiene or cooling result.

Maintenance and part identification

Request the configuration-specific manual and part references for nozzles, seals, pumps, sensors, conveying elements and any heating/cooling components fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.

Configuration-specific document checklist

Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.

Source-unit confirmation required

The supplied reference does not explicitly state a unit for these fields: Cooling Temperature. The original entries are retained rather than assigning an assumed unit. Confirm the units, matching configuration and operating conditions before comparing these figures or approving a quotation.

Compare configurations for your project

For Industrial Spiral Pre-Chiller Machine for Poultry Processing Line, keep the complete identifier the proposed complete model and configuration attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.

Start with this page's listed reference fields: Model status: Product family; exact model not identified in the supplied section; Material: SUS304 Stainless Steel; Capacity Range: 500–13,500 BPH; Motor Power: 5–20 kW; Voltage: 220V / 380V / Customized. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.

Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.

Purchasing review and enquiry preparation

Start with Industrial Spiral Pre-Chiller Machine for Poultry Processing Line and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.

Use the linked poultry processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.

Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote the proposed complete model and configuration and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.

Source reference configuration 1
ItemSpecification
Equipment NamePoultry Spiral Pre-Chiller Machine
ApplicationChicken, Duck, Goose, Turkey Cooling
MaterialSUS304 Stainless Steel
Cooling MediumChilled Water / Ice Water
Cooling Temperature0–4℃
Capacity Range500–13,500 BPH
Spiral Diameter1000 / 1200 / 1600 / 2200 / 2700 / 3200 mm
Motor Power5–20 kW
Control SystemVariable Frequency Control
Structure TypeContinuous Spiral Screw Conveyor
InstallationIndoor Poultry Processing Plant
Voltage220V / 380V / Customized
Cleaning MethodHigh Pressure Water Cleaning

Buyer FAQ

What is the function of a poultry pre-chiller machine?

poultry pre-chiller reduces carcass temperature after evisceration by using chilled water or ice water, improving meat quality and extending shelf life.

What is the difference between a spiral pre-chiller and a normal cooling tank?

spiral pre-chiller uses a continuous screw conveying system, allowing longer cooling time within a smaller installation area and providing more uniform chilling.

What poultry products can be cooled by this machine?

It is suitable for: Whole chicken carcasses Duck carcasses Goose carcasses Turkey carcasses

What material is used for the machine?

The standard construction uses food-grade SUS304 stainless steel for corrosion resistance and hygiene.

How do I choose the correct model?

Selection depends mainly on: Birds per hour (BPH) Bird weight Required cooling temperature vailable installation space

What information is needed to select this equipment?

Define product size, residence time, line speed, water quality, temperature, pressure, flow and drainage. Specify the hygiene process and acceptance method; a machine name does not establish a validated hygiene result.

Are these specifications an approved supply commitment?

No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.

Related configurations and guidance

Poultry processing equipment categories Poultry processing process application Check complete model identifiers and suffixes

Reference specification and document status

Download poultry-4-1-industrial-spiral-pre-chiller-machine-for-poultry-processing-line reference specification and verification checklist

This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.

Applications

Poultry processing workflowExplore poultry processing by process task, source equipment and project conditions.

Capabilities

Poultry processing line planningExplore poultry processing by process task, source equipment and project conditions.

Request specifications

Add company or technical details (optional)

Equipment under review: Industrial Spiral Pre-Chiller Machine for Poultry Processing Line (exact model to confirm)

Start with what you know. You can send drawings or photographs by email.

Continue your technical review

Poultry processing processCompare published equipmentPrepare quotation informationSupplier verification checklistIdentify related replacement parts