SlaughterPro | HUATAOSearch

Mini Chicken Thigh & Drumstick Deboning Machine

Mini Chicken Thigh & Drumstick Deboning Machine. Compare input range, required output and working interfaces; share your requirements for configuration review.

Mini Chicken Thigh & Drumstick Deboning Machine — source product-family photograph; confirm the quoted configuration

Specification notes

Model statusProduct family; exact model not identified in the supplied section
MaterialSUS304 Stainless Steel
Capacity300–700 pcs/hour (depending on product and operator)
Data statusSource reference R1; configuration requires written confirmation

Use and process role

Mini Chicken Thigh & Drumstick Deboning Machine

The Mini Chicken Thigh & Drumstick Deboning Machine is designed for small and medium-sized poultry processors requiring an efficient solution for removing bones from chicken thighs and drumsticks.

Unlike large automatic deboning systems used in high-volume poultry factories, this compact deboner provides a flexible and economical solution for processors who need reliable bone removal without installing a complete production line.

The machine is mainly used for processing:

Chicken thighs

Chicken drumsticks

Chicken leg portions

Poultry dark meat products

The equipment adopts a pneumatic pushing system. The operator places the chicken leg part into the processing holder, and the cylinder-driven pressing mechanism separates the bone from the surrounding meat.

The compact structure allows easy installation in:

Poultry processing workshops

Meat cutting factories

Frozen food plants

Small and medium slaughterhouses

Made from food-grade stainless steel, the machine provides stable performance, easy cleaning and long service life.

Structure and working principle

The operator places the chicken thigh or drumstick into the designated loading position.

After activation, the pneumatic cylinder drives the pressing rod downward.

The pushing mechanism forces the bone through the separation opening while the meat remains outside the discharge area.

During this process:

The bone is separated from the meat

Meat damage is minimized

The deboned meat is collected for further processing

The machine uses controlled pneumatic movement to achieve consistent deboning results.

Compared with manual deboning, it improves:

Processing speed

Product consistency

Meat yield

Source-listed construction and features

1. Compact Design

The machine has a small footprint and can be installed in limited production spaces.

Suitable for:

Small poultry plants

Trial production lines

Food processing workshops

2. Pneumatic Operation

The machine uses compressed air as the driving force.

Applications and integration

The Mini Chicken Thigh & Drumstick Deboning Machine is widely used in poultry further processing applications.

Small Poultry Processing Plants

Suitable for processors producing:

Boneless chicken thigh meat

Chicken fillet products

Ready-to-cook foods

Frozen Food Factories

Used for producing:

Chicken nuggets

Chicken meat products

Prepared frozen meals

Meat Cutting Workshops

Provides an economical alternative to manual deboning.

Food Service Suppliers

Suitable for companies supplying:

Restaurants

Catering businesses

Food chains

Selection conditions and project fit

State incoming product size and temperature, target cut or separation, rate, output specification, interfaces, blade or tool arrangement and guarding requirements. Agree a representative-product trial and the acceptance criteria.

Evidence, configuration and document status

The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.

Source and version

Reference compilation R1, 2026-11-16. Supplied document: 5. Cut-up & Deboning(分割与剔骨).doc; section 5.7. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.

Installation and process interfaces

Provide product size and condition, target cut or separation, feed/discharge direction, support height and space for tool replacement and maintenance. Confirm the proposed guards, operator access and connection to the receiving station.

Utilities, control and feedback requirements

Check the model-specific drive and electrical or fluid-power supply. Agree start/stop, upstream/downstream interlocks and feedback requirements where relevant. Do not infer a control protocol or tool capability from a family photograph.

Maintenance and part identification

Request the configuration-specific manual and part references for matched blades or tools, drive components, seals and position sensors where fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.

Configuration-specific document checklist

Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.

Compare configurations for your project

For Mini Chicken Thigh & Drumstick Deboning Machine, keep the complete identifier the proposed complete model and configuration attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.

Start with this page's listed reference fields: Model status: Product family; exact model not identified in the supplied section; Material: SUS304 Stainless Steel; Capacity: 300–700 pcs/hour (depending on product and operator). Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.

Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.

Purchasing review and enquiry preparation

Start with Mini Chicken Thigh & Drumstick Deboning Machine and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.

Use the linked poultry processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.

Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote the proposed complete model and configuration and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.

Source reference configuration 1
ItemSpecification
Product NameMini Chicken Thigh & Drumstick Deboning Machine
ApplicationChicken thigh and drumstick bone removal
Suitable ProductChicken thigh, drumstick, leg quarter
Operation TypeSemi-automatic pneumatic operation
MaterialSUS304 Stainless Steel
Driving SystemPneumatic cylinder
Air Pressure0.6–0.8 MPa
Capacity300–700 pcs/hour (depending on product and operator)
Meat LossLow meat residue on bone
Operator1 person
InstallationDesktop or standalone installation
CleaningWater cleaning after operation

Buyer FAQ

What information is needed to select this equipment?

State incoming product size and temperature, target cut or separation, rate, output specification, interfaces, blade or tool arrangement and guarding requirements. Agree a representative-product trial and the acceptance criteria.

Are these specifications an approved supply commitment?

No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.

Related configurations and guidance

Poultry processing equipment categories Poultry processing process application Check complete model identifiers and suffixes

Reference specification and document status

Download poultry-5-7-mini-chicken-thigh-drumstick-deboning-machine reference specification and verification checklist

This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.

Applications

Poultry processing workflowExplore poultry processing by process task, source equipment and project conditions.

Capabilities

Poultry processing line planningExplore poultry processing by process task, source equipment and project conditions.

Request specifications

Add company or technical details (optional)

Equipment under review: Mini Chicken Thigh & Drumstick Deboning Machine (exact model to confirm)

Start with what you know. You can send drawings or photographs by email.

Continue your technical review

Poultry processing processCompare published equipmentPrepare quotation informationSupplier verification checklistIdentify related replacement parts