SlaughterPro | HUATAOSearch

Non-Penetrating Pneumatic Stunner for Beef Slaughterhouse | HT-NPCS-01

Non-Penetrating Pneumatic Stunner. Compare animal range, handling method and transfer interfaces; share your requirements for configuration review.

Non-Penetrating Pneumatic Stunner for Beef Slaughterhouse | HT-NPCS-01 — supplied product-directory equipment/process illustration; exact model configuration must be confirmed

Supplied product-directory reference image: equipment family or process context. It is not proof of an exact model, HUATAO installation or certification. Confirm the proposed configuration photograph and drawing before ordering.

Specification notes

ModelHT-NPCS-01
Drive TypePneumatic
MaterialSUS304 Stainless Steel
Data statusSource reference R1; configuration requires written confirmation

Use and process role

Non-Penetrating Pneumatic Cattle Stunner for Modern Beef Processing Facilities

The non-penetrating pneumatic cattle stunner is a professional stunning tool designed for cattle slaughterhouses, beef processing plants, and abattoirs requiring efficient and reliable animal stunning before slaughter.

Unlike penetrating captive bolt devices, this model uses a non-penetrating impact system. The impact head delivers controlled mechanical force to the cattle skull area, creating a rapid stunning effect without penetrating the animal’s head.

The equipment is powered by compressed air and features a durable stainless steel body, compact structure, and easy operation design. It is suitable for continuous use in commercial slaughterhouses where hygiene, safety, and operational efficiency are important requirements.

The pneumatic cattle stunner can be used together with cattle restraining boxes, knocking boxes, and other cattle handling equipment to create a safer and more standardized stunning process.

It is widely applied in beef processing facilities, halal slaughterhouses, and livestock abattoirs worldwide.

Structure and working principle

The non-penetrating pneumatic cattle stunner operates by using compressed air as the power source.

After the operator positions the stunner at the correct stunning point on the cattle head, the pneumatic trigger activates the internal impact mechanism. The compressed air drives the impact piston forward at high speed, generating a controlled impact force through the non-penetrating striking head.

The impact causes temporary unconsciousness, allowing the following slaughter operations to be carried out safely and efficiently.

After each operation, the piston automatically returns to its original position, preparing the equipment for the next stunning cycle.

Source-listed construction and features

1. Non-Penetrating Stunning Design

The equipment uses a non-penetrating impact head instead of a penetrating bolt.

Benefits:

Reduced skull penetration

Cleaner operation

Easier maintenance

Suitable for hygienic slaughter environments

2. Pneumatic Power System

Compressed air provides stable operating performance.

Applications and integration

The non-penetrating pneumatic cattle stunner is mainly used in:

Beef slaughterhouses

Cattle abattoirs

Halal meat processing plants

Livestock processing facilities

Meat export factories

Typical installation and operation areas include:

Cattle restraining box area

Stunning platform

Slaughter preparation section

The equipment is usually used together with:

Cattle stunning box

Fixed killing box

Hydraulic slaughter box

Bleeding conveyor system

Selection conditions and project fit

Provide species, full live-weight and size range, required rate, animal handling procedure, operator position, entry/exit interfaces and destination requirements. Safety arrangements and the applicable procedure require project-specific engineering confirmation.

Evidence, configuration and document status

The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.

Source and version

Reference compilation R1, 2026-11-16. Supplied document: 1. 牛致晕宰杀放血设备.doc; section 1.3. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.

Installation and process interfaces

Provide the full animal weight/size range, approach and exit route, operator position and the interface to the receiving rail or conveyor. Allow access for the proposed guarding and maintenance arrangement.

Utilities, control and feedback requirements

Confirm the proposed electrical, pneumatic or hydraulic arrangement from the matching model table. Agree control positions, emergency stopping and interlocks with the responsible engineering team; do not assume a universal slaughter procedure or approval.

Maintenance and part identification

Request the configuration-specific manual and part references for restraint components, drive parts, hoses and controls where fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.

Configuration-specific document checklist

Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.

Compare configurations for your project

For Non-Penetrating Pneumatic Stunner for Beef Slaughterhouse | HT-NPCS-01, keep the complete identifier HT-NPCS-01 attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.

Start with this page's listed reference fields: Drive Type: Pneumatic; Material: SUS304 Stainless Steel. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.

Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.

Purchasing review and enquiry preparation

Start with Non-Penetrating Pneumatic Stunner for Beef Slaughterhouse | HT-NPCS-01 and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.

Use the linked cattle & beef processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.

Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-NPCS-01 and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.

Source reference configuration 1
ItemSpecification
Product NameNon-Penetrating Pneumatic Cattle Stunner
ModelHT-NPCS-01
ApplicationCattle Stunning
Drive TypePneumatic
Air PressureApprox. 13 bar
MaterialSUS304 Stainless Steel
WeightApprox. 13-20 kg
Operation ModeManual pneumatic control
Stunning TypeNon-penetrating impact
Suitable AnimalsCattle, Cow, Bull, Buffalo
Air SupplyIndustrial Air Compressor
Application EnvironmentBeef slaughterhouse / Abattoir

Buyer FAQ

What is a non-penetrating pneumatic cattle stunner?

non-penetrating pneumatic cattle stunner is a compressed-air-powered stunning tool that creates a controlled impact on the cattle head without penetrating the skull.

What animals can use this stunner?

It is mainly designed for cattle, including cows, bulls, beef cattle, and buffalo.

What air pressure is required?

The standard working pressure is approximately 13 bar depending on the model and working conditions.

Does this equipment require cartridges?

No. The pneumatic system uses compressed air instead of explosive cartridges.

What information is needed to select this equipment?

Provide species, full live-weight and size range, required rate, animal handling procedure, operator position, entry/exit interfaces and destination requirements. Safety arrangements and the applicable procedure require project-specific engineering confirmation.

Are these specifications an approved supply commitment?

No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.

Related configurations and guidance

Cattle & beef processing equipment categories Cattle & beef processing process application Check complete model identifiers and suffixes

Reference specification and document status

Download HT-NPCS-01 reference specification and verification checklist

This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.

Applications

Cattle & beef processing workflowExplore cattle & beef processing by process task, source equipment and project conditions.

Capabilities

Cattle & beef processing line planningExplore cattle & beef processing by process task, source equipment and project conditions.

Request specifications

Add company or technical details (optional)

Equipment under review: HT-NPCS-01

Start with what you know. You can send drawings or photographs by email.

Continue your technical review