Cattle Horn and Hoof Hydraulic Shear for Beef Slaughterhouse | HT-CHHS-01
Cattle Horn and Hoof Hydraulic Shear. Compare input range, required output and working interfaces; share your requirements for configuration review.

Supplied product-directory reference image: equipment family or process context. It is not proof of an exact model, HUATAO installation or certification. Confirm the proposed configuration photograph and drawing before ordering.
Specification notes
| Model | HT-CHHS-01 |
|---|---|
| Hydraulic Power | 3 kW |
| Rated Voltage | 380V / 3 Phase / 50Hz |
| Hydraulic Tank Capacity | Approx. 27 L |
| Data status | Source reference R1; configuration requires written confirmation |
Use and process role
Cattle Horn and Hoof Hydraulic Shear for Efficient Beef Processing
The cattle horn and hoof hydraulic shear is a professional slaughterhouse machine designed for removing cattle horns and hooves during beef processing operations.
After cattle slaughter and bleeding procedures, horns and hooves need to be removed efficiently before further carcass processing. This hydraulic shear uses a high-pressure hydraulic system to provide strong and stable cutting force, allowing operators to complete the cutting operation quickly with less physical effort.
Compared with traditional manual cutting tools, the hydraulic cattle horn and hoof shear improves working efficiency, reduces labor intensity, and provides more consistent cutting performance.
The machine adopts a compact handheld design with hydraulic power assistance. The cutting blades are manufactured from wear-resistant materials to maintain sharpness and durability under continuous slaughterhouse operation.
It is widely used in beef slaughterhouses, cattle abattoirs, meat processing plants, and livestock processing facilities where hygienic and efficient cattle handling equipment is required.
The equipment can be supplied as an independent machine or integrated into cattle slaughter processing areas together with bleeding conveyors, carcass lifting systems, and other cattle processing equipment.
Structure and working principle
The cattle horn and hoof hydraulic shear operates through a hydraulic power unit that generates high-pressure hydraulic oil flow.
When the operator activates the control switch, hydraulic pressure drives the internal piston mechanism, creating a powerful cutting force between the upper and lower blades.
The cutting blades close rapidly around the cattle horn or hoof joint area, completing the cutting operation with controlled force.
After cutting, the hydraulic system automatically returns the blade assembly to its original position, preparing the equipment for the next operation.
The hydraulic drive provides stable cutting force and reduces manual effort compared with traditional mechanical cutters.
Source-listed construction and features
1. Powerful Hydraulic Cutting System
The hydraulic drive provides strong cutting force suitable for cattle horns and thick hoof joints.
Applications and integration
The cattle horn and hoof hydraulic shear is mainly used in:
Beef slaughterhouses
Cattle abattoirs
Meat processing plants
Halal slaughter facilities
Livestock processing centers
Typical processing position:
Cattle Stunning
↓
Bleeding Process
Horn & Hoof Removal
Hide Removal
Carcass Dressing
The equipment is especially suitable for slaughterhouses that require fast removal of cattle horns and hooves before carcass dressing operations.
Selection conditions and project fit
State incoming product size and temperature, target cut or separation, rate, output specification, interfaces, blade or tool arrangement and guarding requirements. Agree a representative-product trial and the acceptance criteria.
Evidence, configuration and document status
The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.
Source and version
Reference compilation R1, 2026-11-16. Supplied document: 1. 牛致晕宰杀放血设备.doc; section 1.4. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.
Installation and process interfaces
Provide product size and condition, target cut or separation, feed/discharge direction, support height and space for tool replacement and maintenance. Confirm the proposed guards, operator access and connection to the receiving station.
Utilities, control and feedback requirements
Check the model-specific drive and electrical or fluid-power supply. Agree start/stop, upstream/downstream interlocks and feedback requirements where relevant. Do not infer a control protocol or tool capability from a family photograph.
Maintenance and part identification
Request the configuration-specific manual and part references for matched blades or tools, drive components, seals and position sensors where fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.
Configuration-specific document checklist
Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.
Compare configurations for your project
For Cattle Horn and Hoof Hydraulic Shear for Beef Slaughterhouse | HT-CHHS-01, keep the complete identifier HT-CHHS-01 attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.
Start with this page's listed reference fields: Hydraulic Power: 3 kW; Rated Voltage: 380V / 3 Phase / 50Hz; Hydraulic Tank Capacity: Approx. 27 L. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.
Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.
Purchasing review and enquiry preparation
Start with Cattle Horn and Hoof Hydraulic Shear for Beef Slaughterhouse | HT-CHHS-01 and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.
Use the linked cattle & beef processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.
Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-CHHS-01 and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.
| Item | Specification |
|---|---|
| Product Name | Cattle Horn and Hoof Hydraulic Shear |
| Model | HT-CHHS-01 |
| Cutting Type | Hydraulic Shearing |
| Application | Cattle Horn & Hoof Removal |
| Hydraulic Power | 3 kW |
| Rated Voltage | 380V / 3 Phase / 50Hz |
| Working Pressure | Approx. 180 bar |
| Blade Opening | Approx. 90 mm |
| Cutting Speed | Approx. 3 seconds open/close cycle |
| Hydraulic Tank Capacity | Approx. 27 L |
| Hydraulic Hose | High-pressure hydraulic hose |
| Control Mode | Hydraulic control |
| Suitable Animals | Cattle, Cow, Bull, Buffalo |
Buyer FAQ
What is a cattle horn and hoof hydraulic shear used for?
It is used to remove cattle horns and hooves during beef slaughter processing.
How does the hydraulic shear work?
The machine uses hydraulic pressure to drive cutting blades, creating powerful shearing force for fast cutting.
What animals can use this equipment?
It is mainly designed for cattle, including cows, bulls, beef cattle, and buffalo.
What power supply is required?
The standard configuration uses a 380V three-phase power supply, but voltage can be customized.
What spare parts are available?
Common replacement parts include: Cutting blades Hydraulic seals Hydraulic hoses Connectors Recommended URL 推荐: /cattle-horn-hoof-hydraulic-shear/
What information is needed to select this equipment?
State incoming product size and temperature, target cut or separation, rate, output specification, interfaces, blade or tool arrangement and guarding requirements. Agree a representative-product trial and the acceptance criteria.
Are these specifications an approved supply commitment?
No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.
Related configurations and guidance
Reference specification and document status
Download HT-CHHS-01 reference specification and verification checklist
This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.