SlaughterPro | HUATAOSearch

Cattle Carcass Rail Weighing System for Beef Slaughterhouse | HT-C235

Cattle Carcass Rail Weighing System. Compare load range, weighing method and line interfaces; share your requirements for configuration review.

Cattle Carcass Rail Weighing System for Beef Slaughterhouse — source product-family photograph; confirm the quoted configuration

Specification notes

ModelHT-C235
Maximum Capacity600 kg
Rail MaterialSUS304 Stainless Steel
Connector MaterialStainless Steel / Hot Galvanized Steel
Power SupplyCustomized according to country standard
Data statusSource reference R1; configuration requires written confirmation

Use and process role

Cattle Carcass Rail Weighing System for Accurate Beef Processing Management

The cattle carcass rail weighing system is a specialized weighing device designed for beef slaughterhouses, cattle abattoirs, and meat processing plants to measure carcass weight during or after slaughter processing.

Installed directly on the overhead conveyor rail system, the equipment allows operators to weigh cattle half carcasses or quarter carcasses without removing them from the production line.

Compared with traditional floor weighing methods, the rail weighing system improves processing efficiency, reduces manual handling, and provides more accurate weight data for production management, quality control, and meat distribution.

The system consists of a stainless steel weighing rail, high-precision load cells, electronic weighing indicator, LCD display, and optional printer. The structure is designed for wet processing environments with frequent cleaning requirements.

The cattle carcass rail weight scale is widely used before carcass dispatching, chilling storage, grading, and meat cutting processes.

It can be integrated with:

Overhead monorail systems

Carcass transfer conveyors

Beef chilling systems

Meat processing lines

The EME QE-C235 type system uses a 1000mm weighing rail, supports up to 600kg weighing capacity, and provides 50g weighing resolution with digital display and printing functions.

Structure and working principle

The cattle carcass rail weighing system works by replacing a section of the existing overhead conveyor rail with a precision weighing rail.

When a hanging carcass trolley enters the weighing section, the load is transferred through the rail structure to high-accuracy sensors.

The sensors convert the mechanical load into an electrical signal, which is processed by the weighing indicator.

The final carcass weight is displayed on the digital screen and can be printed for production records.

After weighing, the carcass continues moving along the overhead rail system without manual unloading.

This in-line weighing method allows continuous production while maintaining accurate weight control.

Source-listed construction and features

1. Direct Installation on Overhead Rail System

The weighing unit can replace a section of the existing carcass rail.

Applications and integration

The cattle carcass rail weighing system is mainly applied in:

Beef slaughterhouses

Cattle abattoirs

Meat cutting plants

Beef export processing facilities

Cold storage warehouses

Typical installation position:

Cattle Slaughtering

↓

Bleeding Process

Carcass Dressing

Carcass Rail Weighing

Chilling / Cutting / Dispatch

The system is especially suitable for plants requiring accurate carcass weight records for production control and commercial transactions.

Selection conditions and project fit

Specify maximum and minimum load, required division, static or dynamic operation, line speed, calibration requirements and the data interface. Confirm any legal-for-trade requirement separately.

Evidence, configuration and document status

The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.

Source and version

Reference compilation R1, 2026-11-16. Supplied document: 1. 牛致晕宰杀放血设备.doc; section 1.5. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.

Installation and process interfaces

Specify rail/platform geometry, mechanical isolation, stable support, transfer height and access for calibration. State static or dynamic weighing and the required data connection.

Utilities, control and feedback requirements

Ask which indicator, sensor and output signals are included. State the required division and destination-specific verification needs; no legal-for-trade approval is established by a generic reference.

Maintenance and part identification

Request the configuration-specific manual and part references for load cells, indicator, cables and mounting components. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.

Configuration-specific document checklist

Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.

Compare configurations for your project

For Cattle Carcass Rail Weighing System for Beef Slaughterhouse | HT-C235, keep the complete identifier HT-C235 attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.

Start with this page's listed reference fields: Maximum Capacity: 600 kg; Rail Material: SUS304 Stainless Steel; Connector Material: Stainless Steel / Hot Galvanized Steel; Power Supply: Customized according to country standard. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.

Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.

Purchasing review and enquiry preparation

Start with Cattle Carcass Rail Weighing System for Beef Slaughterhouse | HT-C235 and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.

Use the linked cattle & beef processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.

Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-C235 and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.

Source reference configuration 1
ItemSpecification
Product NameCattle Carcass Rail Weighing System
ModelHT-C235
ApplicationBeef carcass weighing
Installation TypeOverhead conveyor rail
Weighing Rail Length1000 mm
Maximum Capacity600 kg
Accuracy / Resolution50 g
Sensor Quantity2 High Precision Load Cells
Display TypeLCD Digital Display
Printing FunctionAvailable
Rail MaterialSUS304 Stainless Steel
Rail OptionsTube Rail / Dual Rail / Flat Rail
Connector MaterialStainless Steel / Hot Galvanized Steel
Power SupplyCustomized according to country standard
Suitable ProductsHalf carcass / Quarter carcass

Buyer FAQ

What is a cattle carcass rail weighing system?

It is an electronic weighing device installed on overhead slaughterhouse rails to measure hanging cattle carcass weight.

Can it weigh whole cattle carcasses?

It is mainly designed for half carcasses and quarter carcasses depending on the production process.

What is the maximum weighing capacity?

The standard model supports up to approximately 600kg.

Does the carcass need to be removed from the rail?

No. The carcass can be weighed directly on the overhead conveyor system.

What information is needed to select this equipment?

Specify maximum and minimum load, required division, static or dynamic operation, line speed, calibration requirements and the data interface. Confirm any legal-for-trade requirement separately.

Are these specifications an approved supply commitment?

No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.

Related configurations and guidance

Cattle & beef processing equipment categories Cattle & beef processing process application Check complete model identifiers and suffixes

Reference specification and document status

Download HT-C235 reference specification and verification checklist

This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.

Applications

Cattle & beef processing workflowExplore cattle & beef processing by process task, source equipment and project conditions.

Capabilities

Cattle & beef processing line planningExplore cattle & beef processing by process task, source equipment and project conditions.

Request specifications

Add company or technical details (optional)

Equipment under review: HT-C235

Start with what you know. You can send drawings or photographs by email.

Continue your technical review