SlaughterPro | HUATAOSearch

Safe Fixed Pile for Cattle Slaughterhouse Animal Restraint Area | HT-C104

Safe Fixed Pile. Compare animal range, handling method and transfer interfaces; share your requirements for configuration review.

Safe Fixed Pile for Cattle Slaughterhouse Animal Restraint Area — source product-family photograph; confirm the quoted configuration

Specification notes

ModelHT-C104
Material OptionsHot Galvanized Steel / Stainless Steel
Data statusSource reference R1; configuration requires written confirmation

Use and process role

Safe Fixed Pile for Cattle Slaughterhouse Safety Protection

The cattle slaughterhouse safe fixed pile is a protective barrier device specially designed for livestock abattoirs, beef processing plants, and cattle handling areas.

During cattle slaughter operations, live animals may move unpredictably before entering the stunning box or killing area. Installing fixed safety piles around the working area helps create a controlled passage, prevents cattle from escaping, and reduces potential risks to workers.

The fixed pile is manufactured from heavy-duty galvanized steel or stainless steel, providing excellent strength and corrosion resistance in wet slaughterhouse environments.

The equipment is normally installed around:

Cattle stunning box

Killing area

Animal transfer passage

Loading and unloading zone

The fixed barrier system works together with cattle restraint equipment, gates, and handling corridors to create a safer and more efficient livestock movement environment.

Compared with temporary barriers, fixed safety piles provide a permanent protection solution with high mechanical strength and long service life.

EME specifies this product as a safety fixed pile used around the cattle killing area to prevent cattle escape and protect workers. The standard model uses a Ø120 × 1400 mm structure with approximately 400mm installation spacing.

Structure and working principle

The safe fixed pile works as a physical safety barrier installed around cattle operating areas.

Multiple fixed piles are arranged at designed intervals to form a strong protective boundary. When cattle move through the slaughter preparation area, the barrier limits unnecessary movement and prevents animals from entering unsafe zones.

The solid structure guides cattle toward the correct processing position and helps operators maintain a safer working distance.

The fixed pile does not require electrical or pneumatic power. Its function relies on mechanical strength and correct installation layout.

Source-listed construction and features

1. Strong Anti-Impact Structure

The fixed pile is designed to withstand impact from large livestock.

Applications and integration

The cattle slaughterhouse fixed pile is mainly used in:

Beef slaughterhouses

Cattle abattoirs

Halal slaughter facilities

Livestock handling centers

Meat processing plants

Typical installation position:

Live Cattle Receiving Area

↓

Animal Holding Corridor

Stunning / Killing Area

Carcass Processing Area

The equipment is especially suitable for facilities handling large cattle volumes where animal control and worker protection are important.

Proper cattle handling facility design uses barriers and controlled movement paths to reduce animal agitation and improve safety during handling operations.

Selection conditions and project fit

Provide species, full live-weight and size range, required rate, animal handling procedure, operator position, entry/exit interfaces and destination requirements. Safety arrangements and the applicable procedure require project-specific engineering confirmation.

Evidence, configuration and document status

The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.

Source and version

Reference compilation R1, 2026-11-16. Supplied document: 1. 牛致晕宰杀放血设备.doc; section 1.7. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.

Installation and process interfaces

Provide the full animal weight/size range, approach and exit route, operator position and the interface to the receiving rail or conveyor. Allow access for the proposed guarding and maintenance arrangement.

Utilities, control and feedback requirements

Confirm the proposed electrical, pneumatic or hydraulic arrangement from the matching model table. Agree control positions, emergency stopping and interlocks with the responsible engineering team; do not assume a universal slaughter procedure or approval.

Maintenance and part identification

Request the configuration-specific manual and part references for restraint components, drive parts, hoses and controls where fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.

Configuration-specific document checklist

Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.

Compare configurations for your project

For Safe Fixed Pile for Cattle Slaughterhouse Animal Restraint Area | HT-C104, keep the complete identifier HT-C104 attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.

Start with this page's listed reference fields: Material Options: Hot Galvanized Steel / Stainless Steel. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.

Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.

Purchasing review and enquiry preparation

Start with Safe Fixed Pile for Cattle Slaughterhouse Animal Restraint Area | HT-C104 and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.

Use the linked cattle & beef processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.

Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-C104 and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.

Source reference configuration 1
ItemSpecification
Product NameSafe Fixed Pile for Cattle Slaughterhouse
ModelHT-C104
ApplicationCattle escape prevention and safety protection
Material OptionsHot Galvanized Steel / Stainless Steel
Outer DiameterØ120 mm
Height1400 mm
Installation SpacingApprox. 400 mm
Installation TypeFixed Ground Installation
Structure TypeVertical Safety Barrier Post
Suitable AnimalsCattle, Bull, Buffalo
Working EnvironmentBeef slaughterhouse / Abattoir

Buyer FAQ

What is the purpose of a cattle slaughterhouse fixed pile?

It is used as a safety barrier to prevent cattle escape and protect workers in slaughter areas.

Where is the fixed pile installed?

It is usually installed around cattle killing boxes, stunning areas, animal corridors, and handling zones.

What material is used?

The standard material is hot galvanized steel. Stainless steel versions are also available.

Does the fixed pile require electricity?

No. It works through mechanical protection and does not require power.

What information is needed to select this equipment?

Provide species, full live-weight and size range, required rate, animal handling procedure, operator position, entry/exit interfaces and destination requirements. Safety arrangements and the applicable procedure require project-specific engineering confirmation.

Are these specifications an approved supply commitment?

No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.

Related configurations and guidance

Cattle & beef processing equipment categories Cattle & beef processing process application Check complete model identifiers and suffixes

Reference specification and document status

Download HT-C104 reference specification and verification checklist

This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.

Applications

Cattle & beef processing workflowExplore cattle & beef processing by process task, source equipment and project conditions.

Capabilities

Cattle & beef processing line planningExplore cattle & beef processing by process task, source equipment and project conditions.

Request specifications

Add company or technical details (optional)

Equipment under review: HT-C104

Start with what you know. You can send drawings or photographs by email.

Continue your technical review