SlaughterPro | HUATAOSearch

Electric Stimulation Bleeding Device for Cattle Slaughterhouse | HT-C205

Electric Stimulation Bleeding Device. Compare load range, dimensions and process interfaces; share your requirements for configuration review.

Electric Stimulation Bleeding Device for Cattle Slaughterhouse | HT-C205 — supplied product-directory equipment/process illustration; exact model configuration must be confirmed

Supplied product-directory reference image: equipment family or process context. It is not proof of an exact model, HUATAO installation or certification. Confirm the proposed configuration photograph and drawing before ordering.

Specification notes

ModelHT-C205
VoltageCustomized according to country standard
MaterialStainless Steel
Data statusSource reference R1; configuration requires written confirmation

Use and process role

Electric Stimulation Bleeding Device for Efficient Cattle Blood Removal

The electric stimulation bleeding device is specialized equipment used in cattle slaughterhouses and beef processing plants to improve the bleeding process after slaughter.

During cattle slaughter processing, complete blood removal is an important step that directly affects meat quality, shelf life, hygiene conditions, and carcass processing efficiency.

The electric stimulation system applies controlled electrical pulses to the cattle carcass after bleeding begins. The electrical stimulation causes temporary muscle contraction, helping accelerate blood circulation and improve residual blood drainage from muscles and tissues.

Compared with traditional natural bleeding methods, the electric stimulation bleeding device can shorten the bleeding time and improve carcass processing consistency.

The equipment features a compact structure, simple operation, adjustable stimulation parameters, and reliable performance in wet slaughterhouse environments.

It is commonly installed near:

Cattle bleeding area

Bleeding conveyor

Overhead carcass rail system

Slaughter processing line

The system can be integrated with cattle slaughterhouse equipment including:

Cattle stunning box

Carcass lifting system

Carcass dressing equipment

Structure and working principle

The electric stimulation bleeding device works by applying controlled electrical pulses to the cattle carcass after slaughter.

After the animal is stunned and bleeding begins, the operator places the stimulation electrodes at designated contact points.

The electrical controller generates low-voltage pulses that stimulate muscle contraction. The temporary contraction helps squeeze blood from muscle tissues and improves blood flow through natural drainage channels.

The stimulation process continues for a preset period according to processing requirements.

After completion, the carcass continues along the overhead rail conveyor for further dressing and processing.

The controlled electrical stimulation improves bleeding efficiency while maintaining stable operation in commercial slaughterhouse environments.

Source-listed construction and features

1. Improves Blood Drainage Efficiency

Electrical stimulation helps remove residual blood from carcass tissues.

Benefits:

Better carcass appearance

Improved meat hygiene

More consistent processing results

2. Adjustable Electrical Stimulation Control

The control system allows adjustment according to:

Cattle size

Processing speed

Production requirements

3. Stainless Steel Hygienic Structure

Designed for food processing environments.

Features:

Corrosion-resistant structure

Easy cleaning

Suitable for wet operation areas

4. Simple Operation

The equipment features:

Easy control panel

Quick electrode positioning

Stable operation

5. Compatible with Automated Slaughter Lines

Can be installed with:

Overhead carcass conveyor

Bleeding rail system

Beef processing line

Applications and integration

The electric stimulation bleeding device is mainly used in:

Beef slaughterhouses

Cattle abattoirs

Meat processing plants

Halal slaughter facilities

Beef export factories

Typical processing position:

Cattle Stunning

↓

Bleeding

Electric Stimulation

Hide Removal

Carcass Dressing

It is suitable for plants requiring improved carcass bleeding efficiency and higher meat quality standards.

Selection conditions and project fit

State product or animal range, required duty and throughput, available space, utilities, connection dimensions and delivery scope. Confirm the configuration and acceptance criteria in writing.

Evidence, configuration and document status

The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.

Source and version

Reference compilation R1, 2026-11-16. Supplied document: 1. 牛致晕宰杀放血设备.doc; section 1.8. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.

Installation and process interfaces

Provide the load and product range, travel direction, rail/belt section or mating geometry, working heights, supports and maintenance clearances. Similar appearance is not proof of fit.

Utilities, control and feedback requirements

For powered equipment, confirm the matching drive, supply, control and line signals. For passive components, confirm mechanical interfaces and any requirements of the receiving equipment; no powered or feedback capability should be assumed.

Maintenance and part identification

Request the configuration-specific manual and part references for rollers, chains, hooks, bearings, guides and drive elements where applicable. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.

Configuration-specific document checklist

Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.

Compare configurations for your project

For Electric Stimulation Bleeding Device for Cattle Slaughterhouse | HT-C205, keep the complete identifier HT-C205 attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.

Start with this page's listed reference fields: Voltage: Customized according to country standard; Material: Stainless Steel. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.

Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.

Purchasing review and enquiry preparation

Start with Electric Stimulation Bleeding Device for Cattle Slaughterhouse | HT-C205 and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.

Use the linked cattle & beef processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.

Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-C205 and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.

Source reference configuration 1
ItemSpecification
Product NameElectric Stimulation Bleeding Device
ModelHT-C205
ApplicationCattle carcass bleeding acceleration
Working MethodElectrical pulse stimulation
Control TypeElectronic control
Electrode TypeStainless steel electrode
VoltageCustomized according to country standard
FrequencyAdjustable
Stimulation TimeAdjustable according to process requirements
MaterialStainless Steel
Installation PositionCattle bleeding area
Suitable AnimalsCattle / Bull / Buffalo

Buyer FAQ

What is an electric stimulation bleeding device?

It is a slaughterhouse machine that uses controlled electrical pulses to stimulate carcass muscles and improve blood drainage after cattle slaughter.

Why is electrical stimulation used in cattle slaughter?

It helps accelerate bleeding, improve carcass quality, and create more consistent processing results.

Where is the device installed?

It is usually installed after the bleeding station and connected with the overhead carcass conveyor system.

What animals can use this equipment?

The standard design is for cattle, bulls, and buffalo. Recommended URL 推荐: /cattle-electric-stimulation-bleeding-device/

What information is needed to select this equipment?

State product or animal range, required duty and throughput, available space, utilities, connection dimensions and delivery scope. Confirm the configuration and acceptance criteria in writing.

Are these specifications an approved supply commitment?

No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.

Related configurations and guidance

Cattle & beef processing equipment categories Cattle & beef processing process application Check complete model identifiers and suffixes

Reference specification and document status

Download HT-C205 reference specification and verification checklist

This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.

Applications

Cattle & beef processing workflowExplore cattle & beef processing by process task, source equipment and project conditions.

Capabilities

Cattle & beef processing line planningExplore cattle & beef processing by process task, source equipment and project conditions.

Request specifications

Add company or technical details (optional)

Equipment under review: HT-C205

Start with what you know. You can send drawings or photographs by email.

Continue your technical review