SlaughterPro | HUATAOSearch

Cattle Head Opening Hydraulic Saw for Beef Slaughterhouse | HT-C082

Cattle Head Opening Hydraulic Saw. Compare input range, required output and working interfaces; share your requirements for configuration review.

Cattle Head Opening Hydraulic Saw for Beef Slaughterhouse | HT-C082 — supplied product-directory equipment/process illustration; exact model configuration must be confirmed

Supplied product-directory reference image: equipment family or process context. It is not proof of an exact model, HUATAO installation or certification. Confirm the proposed configuration photograph and drawing before ordering.

Specification notes

ModelHT-C082
Drive SystemHydraulic
Power4 kW
Voltage380V / 50Hz / 3 Phase
Blade Size50 × 60 mm
Machine Size800 × 800 × 2300 mm
Main Frame MaterialStainless Steel
Data statusSource reference R1; configuration requires written confirmation

Use and process role

Cattle Head Opening Hydraulic Saw for Professional Beef Processing Plants

The cattle head opening hydraulic saw is a specialized machine designed for beef slaughterhouses and cattle processing plants to split cattle heads during post-slaughter processing.

After slaughter and head separation, cattle heads may require further processing for brain removal, inspection, and by-product utilization. Traditional manual cutting methods are time-consuming and require significant labor. This hydraulic head opening machine provides a safer and more efficient solution by using hydraulic power to drive the cutting mechanism.

The equipment is designed with a stainless steel working frame, hydraulic cylinder, hydraulic power station, control system, and waterproof electrical components. It provides stable cutting force and is suitable for continuous operation in demanding slaughterhouse environments.

Compared with manual tools, the hydraulic cattle head splitter offers:

Faster processing speed

More consistent cutting quality

Reduced operator workload

Improved workplace safety

The machine is widely used in:

Beef slaughterhouses

Cattle abattoirs

Meat processing plants

By-product processing workshops

The EME model uses a hydraulic operating principle with 4kW power, a 50×60mm blade size, and stainless steel frame construction.

Structure and working principle

The cattle head opening hydraulic saw operates through a hydraulic power system.

After the cattle head is positioned on the working platform, the operator activates the hydraulic control system.

The hydraulic station supplies pressurized oil to the cylinder, which drives the cutting blade downward with stable and powerful movement.

The blade cuts through the cattle head along the required position, allowing the operator to open the skull for brain removal or further inspection.

After completing the cutting operation, the hydraulic cylinder returns to its original position, preparing the machine for the next processing cycle.

The hydraulic drive provides consistent cutting force and reduces vibration compared with manual cutting tools.

Source-listed construction and features

1. Hydraulic Cutting System

The machine uses hydraulic power instead of manual cutting force.

Applications and integration

The cattle head opening hydraulic saw is mainly used in:

Beef slaughterhouses

Cattle abattoirs

Halal meat processing plants

Beef by-product processing facilities

Meat export factories

Typical processing position:

Cattle Slaughter

↓

Head Removal

Head Opening Hydraulic Saw

Brain Removal / Inspection

Head By-product Processing

The equipment is suitable for plants that process cattle heads for edible by-products or veterinary inspection.

Selection conditions and project fit

State incoming product size and temperature, target cut or separation, rate, output specification, interfaces, blade or tool arrangement and guarding requirements. Agree a representative-product trial and the acceptance criteria.

Evidence, configuration and document status

The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.

Source and version

Reference compilation R1, 2026-11-16. Supplied document: 1. 牛致晕宰杀放血设备.doc; section 1.9. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.

Installation and process interfaces

Provide product size and condition, target cut or separation, feed/discharge direction, support height and space for tool replacement and maintenance. Confirm the proposed guards, operator access and connection to the receiving station.

Utilities, control and feedback requirements

Check the model-specific drive and electrical or fluid-power supply. Agree start/stop, upstream/downstream interlocks and feedback requirements where relevant. Do not infer a control protocol or tool capability from a family photograph.

Maintenance and part identification

Request the configuration-specific manual and part references for matched blades or tools, drive components, seals and position sensors where fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.

Configuration-specific document checklist

Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.

Compare configurations for your project

For Cattle Head Opening Hydraulic Saw for Beef Slaughterhouse | HT-C082, keep the complete identifier HT-C082 attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.

Start with this page's listed reference fields: Drive System: Hydraulic; Power: 4 kW; Voltage: 380V / 50Hz / 3 Phase; Blade Size: 50 × 60 mm; Machine Size: 800 × 800 × 2300 mm. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.

Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.

Purchasing review and enquiry preparation

Start with Cattle Head Opening Hydraulic Saw for Beef Slaughterhouse | HT-C082 and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.

Use the linked cattle & beef processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.

Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-C082 and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.

Source reference configuration 1
ItemSpecification
Product NameCattle Head Opening Hydraulic Saw
ModelHT-C082
ApplicationCattle head splitting and processing
Cutting TypeHydraulic Blade Cutting
Drive SystemHydraulic
Power4 kW
Voltage380V / 50Hz / 3 Phase
Blade Size50 × 60 mm
Machine Size800 × 800 × 2300 mm
WeightApprox. 280 kg
Main Frame MaterialStainless Steel
ComponentsHydraulic Station, Oil Cylinder, Control System, Hydraulic Pipe
Suitable AnimalsCattle / Bull / Buffalo

Buyer FAQ

What is a cattle head opening hydraulic saw used for?

It is used to split cattle heads after slaughter for brain removal, inspection, and by-product processing.

Why use hydraulic cutting instead of manual tools?

Hydraulic cutting provides stronger force, better consistency, and reduces operator fatigue.

What animals can be processed?

The standard machine is designed for cattle, bulls, and buffalo.

What material is used for the machine?

The main frame uses stainless steel suitable for slaughterhouse environments.

What information is needed to select this equipment?

State incoming product size and temperature, target cut or separation, rate, output specification, interfaces, blade or tool arrangement and guarding requirements. Agree a representative-product trial and the acceptance criteria.

Are these specifications an approved supply commitment?

No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.

Related configurations and guidance

Cattle & beef processing equipment categories Cattle & beef processing process application Check complete model identifiers and suffixes

Reference specification and document status

Download HT-C082 reference specification and verification checklist

This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.

Applications

Cattle & beef processing workflowExplore cattle & beef processing by process task, source equipment and project conditions.

Capabilities

Cattle & beef processing line planningExplore cattle & beef processing by process task, source equipment and project conditions.

Request specifications

Add company or technical details (optional)

Equipment under review: HT-C082

Start with what you know. You can send drawings or photographs by email.

Continue your technical review