SlaughterPro | HUATAOSearch

Cattle Stomach Cleaning Machine for Slaughterhouse | Automatic Tripe Washer Equipment

Cattle Stomach Cleaning Machine. Benchmark reference only; share your duty and interfaces to confirm a proposed configuration.

Cattle Stomach Cleaning Machine for Slaughterhouse — source product-family photograph; confirm the quoted configuration

Specification notes

Model statusProduct-family enquiry; no confirmed HUATAO model in this source
Reference provenanceSupplied database includes third-party EME / QE benchmark information
Data statusBenchmark values below are not HUATAO supply specifications

Benchmark provenance — configuration not established

The supplied section includes third-party EME / QE reference information. The benchmark tables below are retained for technical comparison and identifying the questions to ask; they do not establish a HUATAO model, manufacturing specification or offered configuration. Request a separate HUATAO quotation and configuration drawing for this equipment family. Third-party model identifiers are not relabelled as HUATAO models.

Use and process role

The Cattle Stomach Cleaning Machine is a professional cleaning system designed for beef slaughterhouses to remove internal residues and impurities from cattle stomachs after evisceration.

In cattle slaughter processing, the stomach (tripe) is an important edible by-product. Before further processing, it requires thorough cleaning to remove:

Remaining feed materials

Digestive residues

Mucous membranes

Internal impurities

Traditional manual washing methods require high labor input and often result in inconsistent cleaning quality. The automatic cattle stomach cleaning machine provides a more efficient and hygienic solution through mechanical rotation and water flushing.

The machine adopts a barrel-type washing chamber with a circular rotary grid structure. During operation, cattle stomachs rotate inside the chamber while hot and cold water continuously washes the surface and internal areas.

The standard model QE-C225 is designed for cattle slaughterhouses and provides:

Stainless steel construction

High and low-speed cross operation

Hot and cold water inlet system

Waterproof electrical control box

Automatic rotary cleaning process

According to EME specifications, the machine operates with 380V/50Hz/3Phase power, total power 4+5.5 kW, water temperature 55–60℃, and capacity approximately 60 cattle stomachs per hour.

Structure and working principle

The cattle stomach cleaning machine uses mechanical rotation combined with water washing.

The working process:

The cleaned cattle stomachs are loaded into the rotary washing chamber.

The drum starts rotating at controlled speed.

Hot and cold water enters through the water inlet pipes.

The stomachs rotate and rub against the internal rotary grid.

Water flow removes internal residues and surface impurities.

Wastewater is discharged through the bottom drain outlet.

Cleaned stomachs are removed for further processing.

The high-speed and low-speed alternating operation improves cleaning performance while reducing damage to the stomach structure.

Source-listed construction and features

1. Automatic Rotary Cleaning System

The rotating washing chamber replaces traditional manual cleaning.

Applications and integration

The Cattle Stomach Cleaning Machine is widely used in:

Beef slaughterhouses

Cattle abattoirs

Meat processing plants

Halal slaughter facilities

Tripe processing factories

Typical processing flow:

Cattle Slaughter → Evisceration → Stomach Collection → Stomach Cleaning → Further Processing → Packaging

The machine is installed in the by-product processing section after stomach removal.

It is suitable for factories producing:

Beef tripe products

Edible offal

Cattle stomach products

Selection conditions and project fit

Define product size, residence time, line speed, water quality, temperature, pressure, flow and drainage. Specify the hygiene process and acceptance method; a machine name does not establish a validated hygiene result.

Evidence, configuration and document status

The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.

Source and version

Reference compilation R1, 2026-11-16. Supplied document: 2. 去皮去内脏胴体修整设备.doc; section 2.11. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.

Installation and process interfaces

State incoming product condition, process residence time, line speed, working height, water connections, drain location and access for cleaning or component removal. Check the full installation envelope, not only catalogue dimensions.

Utilities, control and feedback requirements

Use only the power, water, heating or cooling values given for the matching source configuration. Confirm operating pressure/flow or temperature, control method and line signals. A reference machine does not establish a validated hygiene or cooling result.

Maintenance and part identification

Request the configuration-specific manual and part references for nozzles, seals, pumps, sensors, conveying elements and any heating/cooling components fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.

Configuration-specific document checklist

Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.

Source-unit confirmation required

The supplied reference does not explicitly state a unit for these fields: Water Temperature. The original entries are retained rather than assigning an assumed unit. Confirm the units, matching configuration and operating conditions before comparing these figures or approving a quotation.

Compare configurations for your project

For Cattle Stomach Cleaning Machine for Slaughterhouse | Automatic Tripe Washer Equipment, keep the complete identifier the proposed complete model and configuration attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.

Start with this page's listed reference fields: Model status: Product-family enquiry; no confirmed HUATAO model in this source; Reference provenance: Supplied database includes third-party EME / QE benchmark information. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.

This record includes third-party benchmark information. It is not confirmation of HUATAO manufacture, supply rights, certified performance or an interchangeable HUATAO model.

Purchasing review and enquiry preparation

Start with Cattle Stomach Cleaning Machine for Slaughterhouse | Automatic Tripe Washer Equipment and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.

Use the linked cattle & beef processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.

Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote the proposed complete model and configuration and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.

Third-party benchmark reference — not HUATAO specification
ItemSpecification
Product NameCattle Stomach Cleaning Machine
ApplicationCleaning cattle stomach / tripe
Suitable AnimalCattle
Voltage380V / 50Hz / 3 Phase
Total Power4 + 5.5 kW
Cleaning MethodRotary washing + water flushing
Water Temperature55–60℃
CapacityAbout 60 pcs cattle stomach/hour
Cleaning ChamberBarrel type rotary chamber
Rotary StructureCircular rotary grid
Water SupplyHot and cold water inlet
DrainageBottom drain outlet
Control SystemStainless steel waterproof electric box
MaterialStainless steel

Buyer FAQ

What is a cattle stomach cleaning machine used for?

It is used to clean cattle stomachs (tripe) after slaughter and remove internal residues.

What is the cleaning temperature?

The recommended water temperature is approximately 55–60℃.

How many cattle stomachs can it process per hour?

The standard QE-C225 model can process around 60 cattle stomachs per hour.

What material is the machine made of?

The main structure uses stainless steel components suitable for food processing environments.

Can it be used for sheep or pig stomach cleaning?

The standard model is designed for cattle stomachs. Similar designs can be customized for other animals.

What equipment works together with this machine?

It can be combined with: Cattle evisceration equipment Pneumatic stomach content transport system Offal processing line Tripe packaging equipment

What information is needed to select this equipment?

Define product size, residence time, line speed, water quality, temperature, pressure, flow and drainage. Specify the hygiene process and acceptance method; a machine name does not establish a validated hygiene result.

Are these specifications an approved supply commitment?

No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.

Related configurations and guidance

Cattle & beef processing equipment categories Cattle & beef processing process application Check complete model identifiers and suffixes

Reference specification and document status

Download cattle-2-11-cattle-stomach-cleaning-machine-for-slaughterhouse-automatic-tripe-washer-equipment reference specification and verification checklist

This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.

Applications

Cattle & beef processing workflowExplore cattle & beef processing by process task, source equipment and project conditions.

Capabilities

Cattle & beef processing line planningExplore cattle & beef processing by process task, source equipment and project conditions.

Request specifications

Add company or technical details (optional)

Equipment under review: Cattle Stomach Cleaning Machine for Slaughterhouse | Automatic Tripe Washer Equipment (exact model to confirm)

Start with what you know. You can send drawings or photographs by email.

Continue your technical review