SlaughterPro | HUATAOSearch

Hoof Scalding Tank for Cattle and Sheep Slaughterhouse | Stainless Steel Hoof Soaking Equipment

Hoof Scalding Tank. Benchmark reference only; share your duty and interfaces to confirm a proposed configuration.

Hoof Scalding Tank for Cattle and Sheep Slaughterhouse — source product-family photograph; confirm the quoted configuration

Specification notes

Model statusProduct-family enquiry; no confirmed HUATAO model in this source
Reference provenanceSupplied database includes third-party EME / QE benchmark information
Data statusBenchmark values below are not HUATAO supply specifications

Benchmark provenance — configuration not established

The supplied section includes third-party EME / QE reference information. The benchmark tables below are retained for technical comparison and identifying the questions to ask; they do not establish a HUATAO model, manufacturing specification or offered configuration. Request a separate HUATAO quotation and configuration drawing for this equipment family. Third-party model identifiers are not relabelled as HUATAO models.

Use and process role

The Hoof Scalding Tank for Cattle and Sheep Slaughterhouse is specially designed for the pre-treatment of cattle and sheep hooves before the dehairing process.

After slaughtering, cattle and sheep hooves usually contain hair and residual tissues that need to be softened before mechanical hair removal. The scalding process improves the efficiency of subsequent hoof dehairing and helps achieve a cleaner final product.

The equipment uses a heated water soaking method. By maintaining a stable temperature, the hoof hair roots and connective tissues become softened, making the following dehairing operation faster and more effective.

The hoof scalding tank is commonly installed before:

Cattle/sheep hoof dehairing machine

Hoof trimming equipment

By-product cleaning section

The machine is manufactured with a hygienic structure suitable for slaughterhouse environments, including:

Stainless steel outer shell

Thermal insulation layer

Steam heating pipeline

Temperature control system

According to EME specifications, the standard hoof scalding tank adopts a 1800×800×700mm structure, working temperature 58–62℃, with steam heating and stainless steel components.

Structure and working principle

The hoof scalding tank works by heating water to a controlled temperature and soaking cattle or sheep hooves for a certain period.

The working process:

Clean water is filled into the tank.

Steam enters the heating pipe to increase water temperature.

The temperature control system maintains the required scalding condition.

Cattle or sheep hooves are placed into the hot water.

Heat penetrates the hoof hair area and softens the hair roots.

The softened hooves are transferred to the dehairing machine.

The controlled soaking process improves the efficiency of mechanical hair removal and reduces damage to the hoof surface.

Source-listed construction and features

1. Stable Temperature Control

The equipment is equipped with a temperature control system.

Applications and integration

The Hoof Scalding Tank is mainly used in:

Beef slaughterhouses

Sheep slaughterhouses

Goat processing plants

Halal meat processing facilities

Livestock by-product processing factories

Typical production process:

Animal Slaughter → Hoof Cutting → Hoof Scalding → Hoof Dehairing → Cleaning → Packaging

The equipment is normally installed between hoof collection and the dehairing section.

It is especially suitable for plants processing:

Beef cattle hooves

Sheep feet

Goat feet

where hoof products are recovered for food or industrial applications.

Selection conditions and project fit

Define product size, residence time, line speed, water quality, temperature, pressure, flow and drainage. Specify the hygiene process and acceptance method; a machine name does not establish a validated hygiene result.

Evidence, configuration and document status

The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.

Source and version

Reference compilation R1, 2026-11-16. Supplied document: 2. 去皮去内脏胴体修整设备.doc; section 2.9. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.

Installation and process interfaces

State incoming product condition, process residence time, line speed, working height, water connections, drain location and access for cleaning or component removal. Check the full installation envelope, not only catalogue dimensions.

Utilities, control and feedback requirements

Use only the power, water, heating or cooling values given for the matching source configuration. Confirm operating pressure/flow or temperature, control method and line signals. A reference machine does not establish a validated hygiene or cooling result.

Maintenance and part identification

Request the configuration-specific manual and part references for nozzles, seals, pumps, sensors, conveying elements and any heating/cooling components fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.

Configuration-specific document checklist

Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.

Source-unit confirmation required

The supplied reference does not explicitly state a unit for these fields: Scalding Temperature. The original entries are retained rather than assigning an assumed unit. Confirm the units, matching configuration and operating conditions before comparing these figures or approving a quotation.

Compare configurations for your project

For Hoof Scalding Tank for Cattle and Sheep Slaughterhouse | Stainless Steel Hoof Soaking Equipment, keep the complete identifier the proposed complete model and configuration attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.

Start with this page's listed reference fields: Model status: Product-family enquiry; no confirmed HUATAO model in this source; Reference provenance: Supplied database includes third-party EME / QE benchmark information. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.

This record includes third-party benchmark information. It is not confirmation of HUATAO manufacture, supply rights, certified performance or an interchangeable HUATAO model.

Purchasing review and enquiry preparation

Start with Hoof Scalding Tank for Cattle and Sheep Slaughterhouse | Stainless Steel Hoof Soaking Equipment and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.

Use the linked cattle & beef processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.

Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote the proposed complete model and configuration and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.

Third-party benchmark reference — not HUATAO specification
ItemSpecification
Product NameHoof Scalding Tank
ApplicationCattle and sheep hoof scalding before dehairing
Suitable AnimalsCattle, sheep, goat
Heating MethodSteam heating
Scalding Temperature58–62℃
Overall Size1800 × 800 × 700 mm
Outer Shell Material2mm Stainless Steel Plate
Internal SupportHot Galvanized Steel
Insulation Layer60mm Polyurethane
Heating ComponentStainless Steel Steam Pipe
Temperature ControlAutomatic temperature control system

Buyer FAQ

What is a hoof scalding tank used for?

It is used to soften cattle and sheep hoof hair before the dehairing process.

What temperature is required for hoof scalding?

The recommended working temperature is normally around 58–62℃.

What heating method is used?

The standard design uses steam heating through stainless steel heating pipes.

What information is needed to select this equipment?

Define product size, residence time, line speed, water quality, temperature, pressure, flow and drainage. Specify the hygiene process and acceptance method; a machine name does not establish a validated hygiene result.

Are these specifications an approved supply commitment?

No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.

Related configurations and guidance

Cattle & beef processing equipment categories Cattle & beef processing process application Check complete model identifiers and suffixes

Reference specification and document status

Download cattle-2-9-hoof-scalding-tank-for-cattle-and-sheep-slaughterhouse-stainless-steel-hoof-soaking-equipment reference specification and verification checklist

This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.

Applications

Cattle & beef processing workflowExplore cattle & beef processing by process task, source equipment and project conditions.

Capabilities

Cattle & beef processing line planningExplore cattle & beef processing by process task, source equipment and project conditions.

Request specifications

Add company or technical details (optional)

Equipment under review: Hoof Scalding Tank for Cattle and Sheep Slaughterhouse | Stainless Steel Hoof Soaking Equipment (exact model to confirm)

Start with what you know. You can send drawings or photographs by email.

Continue your technical review