SlaughterPro | HUATAOSearch

Living cattle fixed killing box | HT-C103-II

Living cattle fixed killing box. Compare animal range, handling method and transfer interfaces; share your requirements for configuration review.

Living cattle fixed killing box — source product-family photograph; confirm the quoted configuration

Specification notes

ModelHT-C103-II
Drive SystemPneumatic Control
CapacityMax. 60 cattle/hour
Protection MaterialPolyamide Plate
Data statusSource reference R1; configuration requires written confirmation

Use and process role

Living Cattle Fixed Killing Box for Safe and Efficient Cattle Slaughtering

The living cattle fixed killing box is specially designed for cattle slaughterhouses, beef processing plants, and livestock abattoirs to safely restrain live cattle before slaughter.

The equipment provides a controlled working environment by fixing the cattle head and body position, helping operators perform slaughter procedures safely and efficiently. Compared with traditional manual restraint methods, the fixed killing box reduces animal movement, improves operator safety, and supports more standardized slaughter operations.

The machine adopts a pneumatic control system with a robust galvanized steel structure, including a cattle entrance pushing device, head clamping mechanism, side lifting door, bottom overturn plate, and safety protection components.

The design is suitable for conventional cattle slaughterhouses and can also be integrated into halal cattle processing facilities according to customer requirements.

The fixed cattle killing box is commonly installed at the beginning of the cattle slaughter process, before lifting, bleeding, and overhead carcass transportation systems.

Structure and working principle

The living cattle enters the fixed killing box through the entrance gate. After the animal reaches the designated position, the pneumatic control system activates the restraint devices.

The head clamping mechanism securely fixes the cattle head, while the side door and bottom plate provide additional positioning support. The operator can then complete the slaughter operation under a stable and controlled condition.

After the slaughter process, the bottom overturn mechanism or lifting system releases the carcass for transfer to the next processing stage, such as bleeding conveyor or overhead rail transportation.

The pneumatic drive system provides fast response, simple operation, and reliable performance for continuous slaughterhouse applications.

Source-listed construction and features

1. Stable Cattle Restraining Structure

The equipment uses a heavy-duty frame design to keep cattle safely positioned during slaughter.

Main components include:

Head clamping device

Side protection door

Bottom overturn plate

Entrance pushing system

2. Pneumatic Control System

The pneumatic system provides:

Fast operation response

Easy maintenance

Stable working performance

Low maintenance cost

3. Heavy-Duty Anti-Corrosion Construction

The main structure is manufactured with:

Hot galvanized steel frame

Polyamide protection plates

Stainless steel optional components

The structure is suitable for wet and high-cleaning-frequency slaughterhouse environments.

4. Improved Operator Safety

The fixed killing box helps reduce uncontrolled cattle movement and creates a safer working environment for slaughterhouse operators.

5. Flexible Installation

The equipment can be installed independently or connected with:

Cattle conveying systems

Hoisting equipment

Bleeding conveyors

Overhead rail systems

Applications and integration

The living cattle fixed killing box is mainly used in:

Beef slaughterhouses

Cattle abattoirs

Halal meat processing plants

Livestock slaughter centers

Meat export processing facilities

It is suitable for:

Beef cattle

Dairy cattle

Bulls

Large livestock

The equipment is normally installed before bleeding systems and carcass lifting equipment, serving as the first important handling unit in cattle slaughter processing.

Selection conditions and project fit

Provide species, full live-weight and size range, required rate, animal handling procedure, operator position, entry/exit interfaces and destination requirements. Safety arrangements and the applicable procedure require project-specific engineering confirmation.

Evidence, configuration and document status

The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.

Source and version

Reference compilation R1, 2026-11-16. Supplied document: 1. 牛致晕宰杀放血设备.doc; section 1.2. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.

Installation and process interfaces

Provide the full animal weight/size range, approach and exit route, operator position and the interface to the receiving rail or conveyor. Allow access for the proposed guarding and maintenance arrangement.

Utilities, control and feedback requirements

Confirm the proposed electrical, pneumatic or hydraulic arrangement from the matching model table. Agree control positions, emergency stopping and interlocks with the responsible engineering team; do not assume a universal slaughter procedure or approval.

Maintenance and part identification

Request the configuration-specific manual and part references for restraint components, drive parts, hoses and controls where fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.

Configuration-specific document checklist

Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.

Compare configurations for your project

For Living cattle fixed killing box | HT-C103-II, keep the complete identifier HT-C103-II attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.

Start with this page's listed reference fields: Drive System: Pneumatic Control; Capacity: Max. 60 cattle/hour; Protection Material: Polyamide Plate. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.

Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.

Purchasing review and enquiry preparation

Start with Living cattle fixed killing box | HT-C103-II and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.

Use the linked cattle & beef processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.

Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-C103-II and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.

Source reference configuration 1
ItemSpecification
Product NameLiving Cattle Fixed Killing Box
ModelHT-C103-II
Drive SystemPneumatic Control
CapacityMax. 60 cattle/hour
Working Pressure0.6-0.8 MPa
Air ConsumptionApprox. 630 L/time
Applicable AnimalCattle / Cow / Bull
Main StructureHot Galvanized Steel
Head Fixing SystemPneumatic Head Clamp
Entrance DeviceCattle Push Device
Side DoorPneumatic Lifting Type
Bottom PlateOverturn Plate System
Control SystemPneumatic Control Box
Protection MaterialPolyamide Plate
InstallationFloor Fixed Installation

Buyer FAQ

What is the function of a cattle fixed killing box?

cattle fixed killing box is used to safely restrain live cattle before slaughter, fixing the animal position for efficient and safe operation.

What is the difference between a fixed killing box and a halal rotary killing box?

The fixed killing box mainly focuses on cattle restraint and positioning, while a rotary halal killing box adds a rotating function for specific halal slaughter procedures.

What is the production capacity of this equipment?

The standard design can handle up to approximately 60 cattle per hour depending on operation conditions and slaughterhouse workflow.

What power source does the machine use?

This model uses a pneumatic control system with working pressure around 0.6-0.8MPa.

What information is needed to select this equipment?

Provide species, full live-weight and size range, required rate, animal handling procedure, operator position, entry/exit interfaces and destination requirements. Safety arrangements and the applicable procedure require project-specific engineering confirmation.

Are these specifications an approved supply commitment?

No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.

Related configurations and guidance

Cattle & beef processing equipment categories Cattle & beef processing process application Check complete model identifiers and suffixes

Reference specification and document status

Download HT-C103-II reference specification and verification checklist

This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.

Applications

Cattle & beef processing workflowExplore cattle & beef processing by process task, source equipment and project conditions.

Capabilities

Cattle & beef processing line planningExplore cattle & beef processing by process task, source equipment and project conditions.

Technical resources

Download RFQ preparation checklistsProject, machine and replacement part information to prepare before an enquiry.

Request specifications

Add company or technical details (optional)

Equipment under review: HT-C103-II

Start with what you know. You can send drawings or photographs by email.

Continue your technical review