Red Viscera Transfer Trolley | HT-P613
Red Viscera Transfer Trolley. Compare load range, dimensions and process interfaces; share your requirements for configuration review.

Supplied product-directory reference image: equipment family or process context. It is not proof of an exact model, HUATAO installation or certification. Confirm the proposed configuration photograph and drawing before ordering.
Specification notes
| Model | HT-P613 |
|---|---|
| Size | 1500*800*1600mm(L*W*H) |
| Capacity | 54pcs hanger |
| Component and material | 1) Stainless steel main frame (38*38*2mm) 2) Stainless steel main frame (38*38*2mm) 3) Stainless steel tray (12mm) 4) Nylon wheel (2pcs Omni-directional wheel) |
| Data status | Source reference R1; configuration requires written confirmation |
Use and process role
For line designers, the Red Viscera Transfer Trolley provides a controlled transfer unit for moving offal, carcasses, crates or cut product between process levels or rooms. Its value depends on the hand-off before and after the machine, so the rail, floor level and controls should be reviewed together. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for comparison. For export quotations, confirm voltage, materials, guarding, spare parts and documentation before the purchase order is released.
Structure and working principle
A conveyor, air stream, lifting carriage or guided chute receives the load at one station and delivers it to the next. Sensors or operator controls coordinate the hand-off and prevent overfilling. Cleaning access and safe isolation are part of the operating principle, not optional extras.
Source-listed construction and features
Closed or guarded product path
Capacity matched to the upstream station
Cleanable contact surfaces
Controlled discharge
Jam-clearing access
Simple interlock with adjacent equipment
Applications and integration
The usual application is multi-level pig abattoirs, offal rooms, cutting areas and packing lines with separated process zones. It can be specified for a new line or adapted to a retrofit, provided that the existing supports, working heights, utilities and control signals are measured on site. Plants handling several pig sizes should state the full range rather than quoting only an average.
Selection conditions and project fit
Provide rail or belt dimensions, working height, travel direction, carrier spacing, load range, speed and upstream/downstream connection drawings. A similar-looking carrier is not proof of fit.
Evidence, configuration and document status
The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.
Source and version
Reference compilation R1, 2026-11-16. Supplied document: 3. 冷却,切割,包装输送设备.doc; section 3.4. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.
Installation and process interfaces
Provide the load and product range, travel direction, rail/belt section or mating geometry, working heights, supports and maintenance clearances. Similar appearance is not proof of fit.
Utilities, control and feedback requirements
For powered equipment, confirm the matching drive, supply, control and line signals. For passive components, confirm mechanical interfaces and any requirements of the receiving equipment; no powered or feedback capability should be assumed.
Maintenance and part identification
Request the configuration-specific manual and part references for rollers, chains, hooks, bearings, guides and drive elements where applicable. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.
Configuration-specific document checklist
Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.
Compare configurations for your project
For Red Viscera Transfer Trolley | HT-P613, keep the complete identifier HT-P613 attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.
Start with this page's listed reference fields: Size: 1500*800*1600mm(L*W*H); Capacity: 54pcs hanger; Component and material: 1) Stainless steel main frame (38*38*2mm) 2) Stainless steel main frame (38*38*2mm) 3) Stainless steel tray (12mm) 4) Nylon wheel (2pcs Omni-directional wheel). Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.
Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.
Purchasing review and enquiry preparation
Start with Red Viscera Transfer Trolley | HT-P613 and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.
Use the linked pig processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.
Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-P613 and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.
| Parameter | Reference Value / Buyer Check |
|---|---|
| Model | HT-P613 |
| Application | Which used to collection pig red viscera |
| Size | 1500*800*1600mm(L*W*H) |
| Capacity | 54pcs hanger |
| Component and material | 1) Stainless steel main frame (38*38*2mm) 2) Stainless steel main frame (38*38*2mm) 3) Stainless steel tray (12mm) 4) Nylon wheel (2pcs Omni-directional wheel) |
| Quotation control | Provide product type, piece size, transfer rate, vertical and horizontal distance, inlet and outlet heights, route bends, cleaning method and the required control signals. |
Buyer FAQ
What information is needed to quote the Red Viscera Transfer Trolley?
Provide product type, piece size, transfer rate, vertical and horizontal distance, inlet and outlet heights, route bends, cleaning method and the required control signals.
Which spare parts should be ordered with the machine?
Start with the normal wear and hygiene parts for this duty: bearings, seals, sensors, chains or belts, nozzles, blades, scrapers, pneumatic parts and electrical protection devices as applicable. The supplier should issue a model-specific list.
Are the published technical figures final?
No. The table records reference information from the citedHTpage. Capacity, power, dimensions, material grade and utilities must be confirmed on the quotation and approved drawing.
How should the equipment be accepted after installation?
Use a documented site-acceptance test covering alignment, guards, emergency stops, interlocks, dry running, representative load, cleaning access, leakage or drainage, operator training and delivery of manuals and spares.
What information is needed to select this equipment?
Provide rail or belt dimensions, working height, travel direction, carrier spacing, load range, speed and upstream/downstream connection drawings. A similar-looking carrier is not proof of fit.
Are these specifications an approved supply commitment?
No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.
Related configurations and guidance
Reference specification and document status
Download HT-P613 reference specification and verification checklist
This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.