SlaughterPro | HUATAOSearch

Pig Viscera Trimming and Packing Table | HT-P610

Pig Viscera Trimming and Packing Table. Compare product dimensions, package format and line speed; share your requirements for configuration review.

Pig Viscera Trimming and Packing Table | HT-P610 — supplied product-directory equipment/process illustration; exact model configuration must be confirmed

Supplied product-directory reference image: equipment family or process context. It is not proof of an exact model, HUATAO installation or certification. Confirm the proposed configuration photograph and drawing before ordering.

Specification notes

ModelHT-P610
Out size1800*900*800mm(L*W*H)
Component a nd material1) Stainless steel square tube (38*38*2mm ) 2) stainless steel table board (2mm) 3) Drain hole 4) Stainless steel adjustable foot
Data statusSource reference R1; configuration requires written confirmation

Use and process role

This Pig Viscera Trimming and Packing Table is specified for one practical job: a hygienic machine or workstation for transferring, washing, scraping, draining, inspecting or packing edible offal. A reliable installation begins with correct interface dimensions and a realistic duty cycle. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for comparison. For export quotations, confirm voltage, materials, guarding, spare parts and documentation before the purchase order is released.

Structure and working principle

Offal is loaded into the working area and moved, agitated, scraped or rinsed according to the task. Water and residues leave through a controlled drain or collection point, while cleaned product exits to inspection, chilling or packing. The upstream machine must not feed faster than the receiving station can clear.

Source-listed construction and features

Separate routing for the specified offal stream

Smooth food-contact surfaces

Controlled water and residue discharge

Safe access for loading and unloading

Cleaning access around moving parts

Layout compatible with inspection flow

Applications and integration

The usual application is white-offal and red-offal rooms in pig abattoirs and pork processing plants. It can be specified for a new line or adapted to a retrofit, provided that the existing supports, working heights, utilities and control signals are measured on site. Plants handling several pig sizes should state the full range rather than quoting only an average.

Selection conditions and project fit

State product dimensions and condition, package type, line speed, inspection or sealing criteria, utility supply and integration signals. Confirm performance using the intended product and packaging.

Evidence, configuration and document status

The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.

Source and version

Reference compilation R1, 2026-11-16. Supplied document: 3. 冷却,切割,包装输送设备.doc; section 3.7. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.

Installation and process interfaces

State product size, temperature or condition, package type, feed/discharge height and direction, service access and the required connection to the preceding conveyor.

Utilities, control and feedback requirements

Confirm electrical and other required supplies, start/stop signals and any detection, rejection, sealing or data functions in the actual configuration. Agree trials using the intended product and packaging.

Maintenance and part identification

Request the configuration-specific manual and part references for belts, seals, sensors and packaging or inspection components included in the arrangement. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.

Configuration-specific document checklist

Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.

Compare configurations for your project

For Pig Viscera Trimming and Packing Table | HT-P610, keep the complete identifier HT-P610 attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.

Start with this page's listed reference fields: Out size: 1800*900*800mm(L*W*H); Component a nd material: 1) Stainless steel square tube (38*38*2mm ) 2) stainless steel table board (2mm) 3) Drain hole 4) Stainless steel adjustable foot. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.

Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.

Purchasing review and enquiry preparation

Start with Pig Viscera Trimming and Packing Table | HT-P610 and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.

Use the linked pig processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.

Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-P610 and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.

Source reference configuration 1
ParameterReference Value / Buyer Check
ModelHT-P610
App licationWhich used to collect pig viscera for trimming and packaging
Out size1800*900*800mm(L*W*H)
Deep100mm
Component a nd material1) Stainless steel square tube (38*38*2mm ) 2) stainless steel table board (2mm) 3) Drain hole 4) Stainless steel adjustable foot
Quotation controlIdentify the organ or product, hourly load, batch size, cleaning result, water pressure, drain, working height and destination after the operation. Do not combine red and white offal routes without a hygiene review.

Buyer FAQ

What information is needed to quote the Pig Viscera Trimming and Packing Table?

Identify the organ or product, hourly load, batch size, cleaning result, water pressure, drain, working height and destination after the operation. Do not combine red and white offal routes without a hygiene review.

Which spare parts should be ordered with the machine?

Start with the normal wear and hygiene parts for this duty: bearings, seals, sensors, chains or belts, nozzles, blades, scrapers, pneumatic parts and electrical protection devices as applicable. The supplier should issue a model-specific list.

Are the published technical figures final?

No. The table records reference information from the citedHTpage. Capacity, power, dimensions, material grade and utilities must be confirmed on the quotation and approved drawing.

How should the equipment be accepted after installation?

Use a documented site-acceptance test covering alignment, guards, emergency stops, interlocks, dry running, representative load, cleaning access, leakage or drainage, operator training and delivery of manuals and spares.

What information is needed to select this equipment?

State product dimensions and condition, package type, line speed, inspection or sealing criteria, utility supply and integration signals. Confirm performance using the intended product and packaging.

Are these specifications an approved supply commitment?

No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.

Related configurations and guidance

Pig processing equipment categories Pig processing process application Check complete model identifiers and suffixes

Reference specification and document status

Download HT-P610 reference specification and verification checklist

This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.

Applications

Pig processing workflowExplore pig processing by process task, source equipment and project conditions.

Capabilities

Pig processing line planningExplore pig processing by process task, source equipment and project conditions.

Request specifications

Add company or technical details (optional)

Equipment under review: HT-P610

Start with what you know. You can send drawings or photographs by email.

Continue your technical review

Pig processing processCompare published equipmentPrepare quotation informationSupplier verification checklistIdentify related replacement parts