Automatic Poultry Dewaxing Machine for Duck Processing Line
Automatic Poultry Dewaxing Machine for Duck Processing Line. Compare incoming condition, product range and processing duty; share your requirements for configuration review.

Specification notes
| Model | HT-DW, HT-DW1000, HT-DW3000, HT-DW6000 |
|---|---|
| Configuration basis | Multiple source variants; review the separate tables below |
| Data status | Reference information; confirm exact model and drawing revision |
Use and process role
Duck Wax Removal Equipment for Waterfowl Slaughterhouse
The Automatic Poultry Dewaxing Machine is specially designed for removing hardened wax layers from duck and goose carcasses after the wax dipping and cooling process.
In waterfowl processing, ducks and geese usually have a large amount of fine down feathers that cannot be completely removed by traditional plucking equipment. Wax treatment is widely used to capture remaining fine feathers.
After wax dipping, the carcass enters a cooling process where the wax layer becomes solid. The dewaxing machine then removes the hardened wax together with the remaining fine feathers, improving the final carcass appearance.
Huatao automatic dewaxing machine provides:
Continuous wax removal
Stable processing performance
Reduced manual labor
Improved product quality
The equipment is mainly used in:
Duck slaughterhouses
Goose processing plants
Waterfowl meat processing factories
The dewaxing process is an important step in duck processing lines, especially for export-oriented waterfowl products requiring clean skin appearance.
Structure and working principle
The automatic dewaxing machine is installed after the wax dipping and wax cooling sections.
When the wax-coated duck carcasses enter the machine through the overhead conveyor, rotating dewaxing rollers or scraping devices contact the hardened wax surface.
Through mechanical friction and controlled pressure:
The wax layer is separated from the carcass skin.
Remaining down feathers are removed together with the wax.
The removed wax and feather mixture is collected for recycling or disposal.
The machine parameters can be adjusted according to:
Duck size
Wax thickness
Conveyor speed
Processing requirements
Source-listed construction and features
1. Designed for Duck and Goose Processing
The machine is specially developed for waterfowl processing.
Suitable for:
Duck
Goose
Other wax-treated poultry
2. Efficient Wax Layer Removal
The machine effectively removes:
Solidified wax
Down feathers
Pin feathers
Small feather residues
3. Automatic Continuous Operation
Integrated with the overhead conveyor system.
Applications and integration
The automatic poultry dewaxing machine is mainly used in duck and goose slaughtering plants where wax dipping technology is applied.
During waterfowl processing, fine feathers around the skin are difficult to remove completely using standard plucking equipment. Wax dipping creates a coating layer that captures these feathers.
After cooling, the dewaxing machine removes the wax coating and remaining feather residues before the next processing stage.
Typical applications include:
Commercial duck slaughterhouses
Goose processing factories
Frozen duck export plants
Integrated waterfowl processing lines
Selection conditions and project fit
State product or animal range, required duty and throughput, available space, utilities, connection dimensions and delivery scope. Confirm the configuration and acceptance criteria in writing.
Evidence, configuration and document status
The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.
Source and version
Reference compilation R1, 2026-11-16. Supplied document: 2. 家禽屠宰设备 - 屠宰,烫 脱.doc; section 2.12. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.
Installation and process interfaces
State the upstream scalding/preparation condition, animal or product range, required rate, discharge height, water or energy connections and collection of hair, feathers or other by-products.
Utilities, control and feedback requirements
Confirm the actual drive arrangement, adjustment range and control scope. Compare performance only under defined input and process conditions; reference rates are not an unconditional yield or quality commitment.
Maintenance and part identification
Request the configuration-specific manual and part references for fingers, rubber elements, scrapers, rollers and drive parts where fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.
Configuration-specific document checklist
Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.
Compare configurations for your project
For Automatic Poultry Dewaxing Machine for Duck Processing Line, keep the complete identifier HT-DW, HT-DW1000, HT-DW3000, HT-DW6000 attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.
Start with this page's listed reference fields: Configuration basis: Multiple source variants; review the separate tables below. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.
Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.
Purchasing review and enquiry preparation
Start with Automatic Poultry Dewaxing Machine for Duck Processing Line and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.
Use the linked poultry processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.
Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-DW, HT-DW1000, HT-DW3000, HT-DW6000 and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.
| Parameter | Specification |
|---|---|
| Product Name | Automatic Poultry Dewaxing Machine |
| Brand | Huatao |
| Model Series | HT-DW Series |
| Application | Duck / Goose Wax Removal |
| Suitable Poultry | Duck, Goose, Waterfowl |
| Processing Section | Wax Removal Section |
| Installation Position | After Wax Cooling Pool |
| Working Type | Automatic Continuous Operation |
| Dewaxing Method | Mechanical Roller / Brush System |
| Conveyor Type | Overhead Shackle Conveyor |
| Processing Capacity | 1000-6000 Birds/Hour |
| Main Frame Material | SUS304 Stainless Steel |
| Contact Material | Food Grade Polymer + Stainless Steel |
| Roller Material | Food Grade Rubber / Polymer |
| Roller Quantity | Customized |
| Drive System | Motor Driven |
| Motor Power | 2.2-7.5 kW Customized |
| Conveyor Speed | Adjustable |
| Wax Collection | Integrated Collection System |
| Control System | Electrical Control Cabinet |
| Cleaning Method | Water Washing |
| Installation Type | Conveyor Integrated |
| Dimension | Customized According to Line Layout |
| Power Supply | 380V / 50Hz or Customized |
| Model | Capacity | Application |
|---|---|---|
| HT-DW1000 | Up to 1000 BPH | Small Duck Processing Plant |
| HT-DW3000 | Up to 3000 BPH | Medium Waterfowl Plant |
| HT-DW6000 | Up to 6000 BPH | Large Duck Processing Line |
| Item | Specification |
|---|---|
| Target Material | Solidified Wax Layer |
| Removal Object | Wax + Fine Feathers |
| Bird Type | Duck / Goose |
| Operation | Automatic Continuous |
| Conveyor Integration | Available |
Buyer FAQ
What is a poultry dewaxing machine?
poultry dewaxing machine is equipment used to remove hardened wax and remaining feathers after duck or goose wax dipping.
Is it suitable for chicken processing?
The machine is mainly designed for duck and goose processing because waterfowl require wax treatment for fine feather removal.
Where is the dewaxing machine installed?
It is installed after the wax dipping and cooling sections.
What birds can be processed?
Main applications include: Duck Goose Waterfowl
What are the main wearing parts?
Main spare parts include: Dewaxing rollers Rubber components Bearings Drive parts
What information is needed to select this equipment?
State product or animal range, required duty and throughput, available space, utilities, connection dimensions and delivery scope. Confirm the configuration and acceptance criteria in writing.
Are these specifications an approved supply commitment?
No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.
Related configurations and guidance
Reference specification and document status
Download HT-DW, HT-DW1000, HT-DW3000, HT-DW6000 reference specification and verification checklist
This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.