SlaughterPro | HUATAOSearch

Vertical Chicken Plucker Machine for Poultry Processing Line

Vertical Chicken Plucker Machine. Compare incoming condition, product range and processing duty; share your requirements for configuration review.

Vertical Chicken Plucker Machine for Poultry Processing Line — source product-family photograph; confirm the quoted configuration

Specification notes

ModelHT-VFP-72-2, HT-VFP-72-2F, HT-VFP-D60-2, HT-VFP-D96, HT-VRP-48-1, HT-VRP-64-1, HT-VRP-64-1F, HT-VRP-D40-1, HT-VRP-D64
Configuration basisMultiple source variants; review the separate tables below
Data statusReference information; confirm exact model and drawing revision

Use and process role

The Vertical Chicken Plucker Machine is an automatic defeathering machine designed for chicken processing plants and poultry slaughterhouses.

After the scalding process, poultry carcasses enter the plucking section where feathers need to be removed efficiently before evisceration.

The vertical plucker uses multiple rotating discs equipped with flexible rubber plucking fingers. During operation, carcasses pass through the machine while the rotating fingers gently remove loosened feathers from the skin surface.

Compared with manual feather removal methods, the automatic chicken plucker provides:

Higher processing efficiency

More consistent feather removal

Reduced labor requirements

Better production stability

The machine is widely used in:

Chicken slaughterhouses

Duck processing plants

Goose processing facilities

Small and medium poultry processing lines

The vertical plucker can be installed as an independent machine or integrated into a complete poultry processing line together with:

Poultry scalder

Overhead conveyor system

Carcass washer

Evisceration equipment

Structure and working principle

The vertical chicken plucker operates through a motor-driven rotating system.

After scalding, poultry carcasses are transferred into the plucking chamber. Multiple rotating discs or shafts equipped with rubber plucking fingers rotate at high speed.

When the carcass contacts the flexible fingers, the mechanical friction removes loosened feathers from the skin without causing excessive damage.

The machine design allows continuous feather removal while maintaining stable processing speed.

The plucking performance depends on:

Scalding temperature

Bird size

Rotation speed

Finger arrangement

Processing speed

Proper adjustment of these parameters helps achieve better feather removal results and improve carcass appearance.

Source-listed construction and features

1. Efficient Feather Removal System

The machine adopts multiple rotating plucking units with durable rubber fingers.

Applications and integration

Chicken Processing Plants

The vertical chicken plucker machine is mainly installed after the scalding section in commercial chicken slaughterhouses.

After feathers are loosened by hot water, carcasses enter the plucker where rotating fingers remove feathers quickly before evisceration.

For broiler processing plants, stable defeathering performance directly affects production efficiency and carcass quality.

Duck and Goose Processing Facilities

Ducks and geese usually have stronger feathers compared with chickens.

The plucker can be customized with suitable finger materials and machine configurations to improve feather removal results while reducing skin damage.

Small and Medium Poultry Slaughterhouses

Compared with large automated plucking systems, vertical pluckers provide a practical solution for processors requiring:

Lower investment

Compact installation

Flexible production capacity

Complete Poultry Processing Lines

The vertical plucker can be combined with:

Poultry scalder

Killing system

Conveyor system

Carcass washing equipment

to create a complete poultry slaughtering solution.

Selection conditions and project fit

State species, incoming weight and temperature range, upstream scalding condition, required rate, discharge height, water or energy supply and by-product collection. Agree product quality criteria under the actual input conditions.

Evidence, configuration and document status

The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.

Source and version

Reference compilation R1, 2026-11-16. Supplied document: 2. 家禽屠宰设备 - 屠宰,烫 脱.doc; section 2.4. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.

Installation and process interfaces

State the upstream scalding/preparation condition, animal or product range, required rate, discharge height, water or energy connections and collection of hair, feathers or other by-products.

Utilities, control and feedback requirements

Confirm the actual drive arrangement, adjustment range and control scope. Compare performance only under defined input and process conditions; reference rates are not an unconditional yield or quality commitment.

Maintenance and part identification

Request the configuration-specific manual and part references for fingers, rubber elements, scrapers, rollers and drive parts where fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.

Configuration-specific document checklist

Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.

Source-unit confirmation required

The supplied reference does not explicitly state a unit for these fields: Power. The original entries are retained rather than assigning an assumed unit. Confirm the units, matching configuration and operating conditions before comparing these figures or approving a quotation.

Compare configurations for your project

For Vertical Chicken Plucker Machine for Poultry Processing Line, keep the complete identifier HT-VFP-72-2, HT-VFP-72-2F, HT-VFP-D60-2, HT-VFP-D96, HT-VRP-48-1, HT-VRP-64-1, HT-VRP-64-1F, HT-VRP-D40-1, HT-VRP-D64 attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.

Start with this page's listed reference fields: Configuration basis: Multiple source variants; review the separate tables below. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.

Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.

Purchasing review and enquiry preparation

Start with Vertical Chicken Plucker Machine for Poultry Processing Line and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.

Use the linked poultry processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.

Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-VFP-72-2, HT-VFP-72-2F, HT-VFP-D60-2, HT-VFP-D96, HT-VRP-48-1, HT-VRP-64-1, HT-VRP-64-1F, HT-VRP-D40-1, HT-VRP-D64 and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.

Source reference configuration 1
ApplicationTypeModelCabinets StructureCabinets QTYDisks QTYFingers QtyPowerDimension
ChickenVertical Rough PluckerHT-VRP-48-1fixed cabinet24857617.64500×2350×2530mm
Vertical Rough PluckerHT-VRP-64-1separate cabinets26476817.65400×2350×2530mm
Vertical Rough PluckerHT-VRP-64-1Fseparate cabinets46476817.65000×2350×2530mm
Vertical Fine PluckerHT-VFP-72-2fixed cabinet27243213.24000×2350×2530mm
Vertical Fine PluckerHT-VFP-72-2Fseparate cabinets67243213.23500×2350×2530mm
DuckVertical Rough PluckerHT-VRP-D40-1separate cabinets4404808.83500×2350×2530mm
Vertical Rough PluckerHT-VRP-D64separate cabinets46476817.65000×2350×2530mm
Vertical Fine PluckerHT-VFP-D60-2separate cabinets66064013.23500×2350×2530mm
Vertical Fine PluckerHT-VFP-D96separate cabinets696102426.45000×2350×2530mm

Buyer FAQ

What is a vertical chicken plucker machine used for?

It is used to automatically remove feathers from chicken carcasses after the scalding process.

Where is the plucker installed in a poultry processing line?

It is installed after the poultry scalder and before evisceration equipment.

How often should rubber fingers be replaced?

Replacement frequency depends on: Processing volume Bird type Working hours Cleaning conditions

What information is needed to select this equipment?

State species, incoming weight and temperature range, upstream scalding condition, required rate, discharge height, water or energy supply and by-product collection. Agree product quality criteria under the actual input conditions.

Are these specifications an approved supply commitment?

No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.

Related configurations and guidance

Poultry processing equipment categories Poultry processing process application Check complete model identifiers and suffixes

Reference specification and document status

Download HT-VFP-72-2, HT-VFP-72-2F, HT-VFP-D60-2, HT-VFP-D96, HT-VRP-48-1, HT-VRP-64-1, HT-VRP-64-1F, HT-VRP-D40-1, HT-VRP-D64 reference specification and verification checklist

This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.

Applications

Poultry processing workflowExplore poultry processing by process task, source equipment and project conditions.

Capabilities

Poultry processing line planningExplore poultry processing by process task, source equipment and project conditions.

Request specifications

Add company or technical details (optional)

Equipment under review: HT-VFP-72-2, HT-VFP-72-2F, HT-VFP-D60-2, HT-VFP-D96, HT-VRP-48-1, HT-VRP-64-1, HT-VRP-64-1F, HT-VRP-D40-1, HT-VRP-D64

Start with what you know. You can send drawings or photographs by email.

Continue your technical review

Poultry processing processCompare published equipmentPrepare quotation informationSupplier verification checklistIdentify related replacement parts