SlaughterPro | HUATAOSearch

Stainless Steel Blood Collecting Trough for Poultry Slaughter Line | HT-BCT

Stainless Steel Blood Collecting Trough. Compare load range, dimensions and process interfaces; share your requirements for configuration review.

Stainless Steel Blood Collecting Trough for Poultry Slaughter Line — source product-family photograph; confirm the quoted configuration

Specification notes

ModelHT-BCT
Main MaterialSUS304 Stainless Steel
Contact MaterialFood Grade Stainless Steel
Production CapacitySuitable for 500-12000 BPH Poultry Lines
Data statusSource reference R1; configuration requires written confirmation

Use and process role

Automatic Poultry Blood Collection System for Chicken Processing Plant

The Blood Collecting Trough is an essential hygiene component installed in the bleeding section of poultry slaughter lines.

After stunning and killing, poultry carcasses are transferred by an overhead conveyor into the bleeding area. The blood collecting trough is positioned directly underneath the hanging birds to capture discharged blood during the bleeding process.

The collected blood can then be transferred through drainage outlets to a collection tank or by-product recovery system.

A properly designed blood collection system helps poultry processors:

Maintain a cleaner production environment

Reduce contamination risks

Improve workshop hygiene management

Recover valuable animal by-products

The equipment is widely used in:

Chicken slaughterhouses

Duck processing plants

Goose processing facilities

Automated poultry processing lines

The trough structure can be customized according to:

Conveyor layout

Processing capacity

Bleeding time

Factory installation requirements

Commercial poultry bleeding troughs are generally manufactured from stainless steel and designed with drainage connections for blood collection and cleaning.

Structure and working principle

After poultry is killed, the carcasses remain suspended on the overhead conveyor during the bleeding process.

The Blood Collecting Trough is installed below the conveyor line. As blood flows from the carcass, it is collected inside the stainless steel trough instead of falling onto the factory floor.

The collected blood is discharged through the outlet pipe into a storage tank or recovery system.

The inclined trough design allows:

Faster blood flow

Easier cleaning

Reduced residue accumulation

After production, the trough can be cleaned by water flushing to maintain sanitary conditions.

Source-listed construction and features

1. Hygienic Stainless Steel Construction

The whole structure is manufactured from food-grade stainless steel.

Applications and integration

Chicken Slaughterhouses

The blood collecting trough is mainly installed in the killing and bleeding section of chicken processing plants.

After birds are killed, blood drains naturally while carcasses remain suspended on the conveyor. The trough collects the blood and prevents contamination of the processing area.

Duck and Goose Processing Plants

For duck and goose processing lines, the trough can be customized according to:

Bird size

Conveyor height

Bleeding time

Automatic Poultry Processing Lines

The equipment is commonly integrated with:

Electric stunner

Killing machine

Overhead conveyor

Scalding machine

to form a complete slaughtering workflow.

Selection conditions and project fit

State product or animal range, required duty and throughput, available space, utilities, connection dimensions and delivery scope. Confirm the configuration and acceptance criteria in writing.

Evidence, configuration and document status

The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.

Source and version

Reference compilation R1, 2026-11-16. Supplied document: 2. 家禽屠宰设备 - 屠宰,烫 脱.doc; section 2.6. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.

Installation and process interfaces

Provide the load and product range, travel direction, rail/belt section or mating geometry, working heights, supports and maintenance clearances. Similar appearance is not proof of fit.

Utilities, control and feedback requirements

For powered equipment, confirm the matching drive, supply, control and line signals. For passive components, confirm mechanical interfaces and any requirements of the receiving equipment; no powered or feedback capability should be assumed.

Maintenance and part identification

Request the configuration-specific manual and part references for rollers, chains, hooks, bearings, guides and drive elements where applicable. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.

Configuration-specific document checklist

Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.

Compare configurations for your project

For Stainless Steel Blood Collecting Trough for Poultry Slaughter Line | HT-BCT, keep the complete identifier HT-BCT attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.

Start with this page's listed reference fields: Main Material: SUS304 Stainless Steel; Contact Material: Food Grade Stainless Steel; Production Capacity: Suitable for 500-12000 BPH Poultry Lines. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.

Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.

Purchasing review and enquiry preparation

Start with Stainless Steel Blood Collecting Trough for Poultry Slaughter Line | HT-BCT and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.

Use the linked poultry processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.

Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-BCT and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.

Source reference configuration 1
ParameterSpecification
Product NameBlood Collecting Trough
BrandHuatao
Model SeriesHT-BCT Series
ApplicationPoultry Bleeding Section
Suitable PoultryChicken, Duck, Goose
Installation PositionAfter Killing Station Before Scalding
Processing Line TypeManual / Automatic Poultry Slaughter Line
Main MaterialSUS304 Stainless Steel
Contact MaterialFood Grade Stainless Steel
Trough StructureInclined Stainless Steel Collection Channel
LengthCustomized According to Conveyor Layout
WidthCustomized According to Line Capacity
HeightCustomized
Drain Outlet DiameterCustomized
Drainage MethodGravity Discharge / Pump Connection
Conveyor CompatibilityOverhead Shackle Conveyor
Cleaning MethodWater Flushing
Surface TreatmentPolished Stainless Steel
Installation TypeFloor Mounted / Conveyor Line Mounted
Production CapacitySuitable for 500-12000 BPH Poultry Lines
CustomizationAvailable
Source reference configuration 2
Processing CapacityRecommended Trough Length
500-1000 BPHCustomized
1000-3000 BPHCustomized
3000-6000 BPHCustomized
6000+ BPHCustomized Multi-Section Design

Buyer FAQ

Where is the blood collecting trough installed?

It is installed below the overhead conveyor after the killing station and before the scalding section.

What material is used for the trough?

The standard material is SUS304 stainless steel suitable for food processing environments.

What poultry can use this equipment?

It is suitable for: Chicken Duck Goose

What information is needed to select this equipment?

State product or animal range, required duty and throughput, available space, utilities, connection dimensions and delivery scope. Confirm the configuration and acceptance criteria in writing.

Are these specifications an approved supply commitment?

No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.

Related configurations and guidance

Poultry processing equipment categories Poultry processing process application Check complete model identifiers and suffixes

Reference specification and document status

Download HT-BCT reference specification and verification checklist

This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.

Applications

Poultry processing workflowExplore poultry processing by process task, source equipment and project conditions.

Capabilities

Poultry processing line planningExplore poultry processing by process task, source equipment and project conditions.

Request specifications

Add company or technical details (optional)

Equipment under review: HT-BCT

Start with what you know. You can send drawings or photographs by email.

Continue your technical review

Poultry processing processCompare published equipmentPrepare quotation informationSupplier verification checklistIdentify related replacement parts