Poultry Feet Spiral Pre-Chiller for Chicken Feet Processing Line | HT-PFSP
Poultry Feet Spiral Pre-Chiller. Compare product range, residence time and utility conditions; share your requirements for configuration review.

Specification notes
| Model | HT-PFSP |
|---|---|
| Main Material | SUS304 Stainless Steel |
| Production Capacity | Customized |
| Material Standard | 304 Stainless Steel |
| Data status | Source reference R1; configuration requires written confirmation |
Use and process role
The Poultry Feet Spiral Pre-Chiller is specially designed for cooling poultry feet after scalding and processing.
During chicken feet processing, the product temperature needs to be reduced quickly before grading, packing, freezing or further treatment. The spiral pre-chiller keeps chicken feet immersed in chilled water for a controlled period, allowing heat to transfer from the product to the cooling water.
The machine adopts a spiral conveying structure inside a stainless steel water tank. While the spiral system moves the feet forward continuously, an air blower generates bubbles to agitate the water, ensuring uniform temperature distribution throughout the chilling tank.
The equipment is suitable for cooling:
Chicken feet
Duck feet
Goose feet
It is widely used in:
Chicken feet processing factories
Poultry slaughterhouses
Frozen poultry product production lines
With continuous operation, stable cooling performance and easy maintenance, the spiral feet pre-chiller improves processing efficiency and product quality.
Structure and working principle
The poultry feet spiral pre-chiller works through a combination of spiral conveying and chilled water cooling.
After scalding and cleaning, poultry feet enter the cooling tank and remain immersed in cold water.
The internal spiral conveyor slowly moves the feet through the tank, controlling the residence time during cooling.
At the same time, the air blower produces continuous airflow into the water. The generated bubbles create water movement, preventing temperature differences and ensuring that all feet receive consistent cooling.
The feeding side is equipped with an overflow structure to maintain the correct water level during continuous production.
After reaching the discharge end, cooled poultry feet are transferred to the next processing stage.
Source-listed construction and features
1. Efficient Immersion Cooling
The poultry feet are fully immersed in chilled water, providing effective heat exchange and rapid temperature reduction.
2. Air Agitation System for Uniform Cooling
Equipped with an air blower system.
Benefits:
Improves water circulation
Prevents uneven temperature zones
Provides consistent chilling results
3. Continuous Spiral Conveying
The spiral structure ensures:
Continuous production
Controlled cooling time
Stable product movement
4. Food Grade Stainless Steel Construction
The complete machine is manufactured from 304 stainless steel.
Applications and integration
The Poultry Feet Spiral Pre-Chiller is mainly applied in poultry feet processing lines after scalding and cleaning.
After processing, poultry feet usually have a high temperature. The pre-chiller reduces the product temperature before further operations such as:
Grading
Packing
Freezing
Export preparation
It is commonly used in:
Chicken feet processing plants
Poultry slaughterhouses
Frozen chicken feet production factories
Duck feet processing facilities
For export-oriented poultry processors, effective pre-chilling helps improve product appearance, freshness and storage quality.
Selection conditions and project fit
Define product size, residence time, line speed, water quality, temperature, pressure, flow and drainage. Specify the hygiene process and acceptance method; a machine name does not establish a validated hygiene result.
Evidence, configuration and document status
The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.
Source and version
Reference compilation R1, 2026-11-16. Supplied document: 3. Evisceration(去内脏系统).doc; section 3.5. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.
Installation and process interfaces
State incoming product condition, process residence time, line speed, working height, water connections, drain location and access for cleaning or component removal. Check the full installation envelope, not only catalogue dimensions.
Utilities, control and feedback requirements
Use only the power, water, heating or cooling values given for the matching source configuration. Confirm operating pressure/flow or temperature, control method and line signals. A reference machine does not establish a validated hygiene or cooling result.
Maintenance and part identification
Request the configuration-specific manual and part references for nozzles, seals, pumps, sensors, conveying elements and any heating/cooling components fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.
Configuration-specific document checklist
Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.
Compare configurations for your project
For Poultry Feet Spiral Pre-Chiller for Chicken Feet Processing Line | HT-PFSP, keep the complete identifier HT-PFSP attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.
Start with this page's listed reference fields: Main Material: SUS304 Stainless Steel; Production Capacity: Customized; Material Standard: 304 Stainless Steel. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.
Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.
Purchasing review and enquiry preparation
Start with Poultry Feet Spiral Pre-Chiller for Chicken Feet Processing Line | HT-PFSP and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.
Use the linked poultry processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.
Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-PFSP and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.
| Parameter | Specification |
|---|---|
| Product Name | Poultry Feet Spiral Pre-Chiller |
| Brand | Huatao |
| Model | HT-PFSP Series |
| Application | Poultry Feet Cooling |
| Suitable Products | Chicken Feet, Duck Feet, Goose Feet |
| Cooling Method | Immersion Water Cooling |
| Cooling Medium | Cold Water / Ice Water / Flake Ice |
| Main Material | SUS304 Stainless Steel |
| Conveyor Type | Spiral Conveyor |
| Agitation System | Air Blower Water Agitation |
| Water Level Control | Overflow Structure |
| Operation Mode | Continuous Working |
| Cooling Time | Adjustable According to Requirement |
| Production Capacity | Customized |
| Installation Type | Integrated Processing Line |
| Cleaning Method | Water Washing |
| Item | Specification |
|---|---|
| Main Function | Reduce Poultry Feet Temperature |
| Cooling Method | Cold Water Immersion |
| Water Movement | Air Bubble Agitation |
| Product Residence Time | Adjustable |
| Applicable Products | Chicken Feet / Duck Feet / Goose Feet |
| Material Standard | 304 Stainless Steel |
| Working Mode | Continuous Operation |
Buyer FAQ
What is a poultry feet spiral pre-chiller?
It is cooling equipment designed to reduce the temperature of poultry feet by immersing them in chilled water.
What products can be processed?
It is mainly used for: Chicken feet Duck feet Goose feet
How does the machine keep cooling water temperature uniform?
The air blower creates bubbles and water movement, helping maintain even temperature distribution.
What cooling medium can be used?
The machine can use: Cold water Ice water Flake ice
What material is the machine made of?
The complete machine is made of food-grade 304 stainless steel.
What information is needed to select this equipment?
Define product size, residence time, line speed, water quality, temperature, pressure, flow and drainage. Specify the hygiene process and acceptance method; a machine name does not establish a validated hygiene result.
Are these specifications an approved supply commitment?
No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.
Related configurations and guidance
Reference specification and document status
Download HT-PFSP reference specification and verification checklist
This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.