SlaughterPro | HUATAOSearch

Automatic Spiral Chicken Feet Scalder Machine for Poultry Processing Line

Automatic Spiral Chicken Feet Scalder Machine. Compare product range, residence time and utility conditions; share your requirements for configuration review.

Automatic Spiral Chicken Feet Scalder Machine for Poultry Processing Line — source product-family photograph; confirm the quoted configuration

Specification notes

Model statusProduct family; exact model not identified in the supplied section
MaterialSUS304 Stainless Steel
Capacity500 - 12000 feet/hour (Customized)
Power Supply380V 50Hz / Customized
Data statusSource reference R1; configuration requires written confirmation

Use and process role

The Automatic Spiral Chicken Feet Scalder Machine is specially designed for poultry slaughterhouses and chicken feet processing plants to prepare chicken paws before the peeling process.

During chicken feet processing, the outer yellow skin must be softened and loosened before entering the feet peeling machine. This equipment uses a spiral conveying structure to move chicken feet continuously through hot water, ensuring stable scalding time and uniform heat transfer.

Compared with traditional manual soaking methods, the automatic spiral feet scalder provides better processing consistency, higher production efficiency and improved hygiene control.

The machine is mainly installed after the poultry slaughter line foot cutting section and before the chicken feet peeling machine. It can be integrated into a complete chicken feet processing system including feet peeling, washing, chilling and packaging equipment.

The equipment is widely used in commercial poultry processing plants producing fresh or frozen chicken feet for domestic consumption and export markets.

Structure and working principle

After chicken feet are separated from poultry carcasses, they are automatically transferred into the inlet of the spiral feet scalder.

The internal spiral conveyor rotates continuously and pushes the chicken feet forward while keeping them fully immersed in hot water.

During transportation, controlled hot water temperature softens the yellow outer skin layer and loosens the connection between skin and feet surface.

The adjustable conveying speed controls the scalding time according to different chicken varieties and production requirements.

After completing the heating process, the spiral discharge mechanism automatically sends the treated chicken feet to the next processing stage, usually a chicken feet peeling machine.

The continuous circulation of hot water and stable mechanical conveying ensure uniform treatment and reduce damage to the final product.

Source-listed construction and features

1. Spiral Continuous Conveying Design

The spiral structure allows chicken feet to move smoothly inside the tank while maintaining sufficient contact time with hot water.

Benefits:

Uniform scalding effect

Continuous production operation

Reduced manual handling

2. Food Grade Stainless Steel Construction

The machine is manufactured with stainless steel materials suitable for food processing environments.

Applications and integration

Chicken Feet Processing Plant

The automatic spiral feet scalder is mainly applied in poultry processing factories where chicken feet are collected as valuable by-products.

Typical applications include:

Chicken slaughterhouses

Frozen poultry export factories

Chicken feet processing plants

Meat product manufacturers

Poultry by-product processing facilities

The equipment is suitable for processing:

Chicken feet

Chicken paws

Broiler feet

Duck feet (with customized configuration)

Selection conditions and project fit

Define product size, residence time, line speed, water quality, temperature, pressure, flow and drainage. Specify the hygiene process and acceptance method; a machine name does not establish a validated hygiene result.

Evidence, configuration and document status

The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.

Source and version

Reference compilation R1, 2026-11-16. Supplied document: 7. 鸡爪处理设备 FEET PROCESSING.doc; section 7.1. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.

Installation and process interfaces

State incoming product condition, process residence time, line speed, working height, water connections, drain location and access for cleaning or component removal. Check the full installation envelope, not only catalogue dimensions.

Utilities, control and feedback requirements

Use only the power, water, heating or cooling values given for the matching source configuration. Confirm operating pressure/flow or temperature, control method and line signals. A reference machine does not establish a validated hygiene or cooling result.

Maintenance and part identification

Request the configuration-specific manual and part references for nozzles, seals, pumps, sensors, conveying elements and any heating/cooling components fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.

Configuration-specific document checklist

Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.

Compare configurations for your project

For Automatic Spiral Chicken Feet Scalder Machine for Poultry Processing Line, keep the complete identifier the proposed complete model and configuration attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.

Start with this page's listed reference fields: Model status: Product family; exact model not identified in the supplied section; Material: SUS304 Stainless Steel; Capacity: 500 - 12000 feet/hour (Customized); Power Supply: 380V 50Hz / Customized. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.

Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.

Purchasing review and enquiry preparation

Start with Automatic Spiral Chicken Feet Scalder Machine for Poultry Processing Line and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.

Use the linked poultry processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.

Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote the proposed complete model and configuration and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.

Source reference configuration 1
ParameterSpecification
Equipment NameAutomatic Spiral Chicken Feet Scalder
ApplicationChicken feet / chicken paws / poultry feet
MaterialSUS304 Stainless Steel
Structure TypeSpiral Screw Conveyor Type
Processing ModeContinuous Automatic Operation
Heating MethodHot Water Heating
Temperature ControlAutomatic / Adjustable
Capacity500 - 12000 feet/hour (Customized)
Power Supply380V 50Hz / Customized
Motor TypeGear Motor Drive
InstallationStand-alone or Production Line Integration

Buyer FAQ

What is the function of a chicken feet scalder machine?

chicken feet scalder machine softens the yellow outer skin of chicken feet before peeling, improving the efficiency and quality of skin removal.

What is the difference between a chicken feet scalder and a chicken feet peeler?

The scalder prepares the chicken feet by heating and loosening the skin, while the peeler mechanically removes the softened yellow skin.

What capacity can the spiral feet scalder handle?

The capacity depends on the model and production requirements. Industrial models can be customized for small, medium and high-capacity poultry processing plants.

What material is used for the machine?

Food-grade stainless steel such as SUS304 is commonly used for the structure and product-contact parts.

What information is needed to select this equipment?

Define product size, residence time, line speed, water quality, temperature, pressure, flow and drainage. Specify the hygiene process and acceptance method; a machine name does not establish a validated hygiene result.

Are these specifications an approved supply commitment?

No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.

Related configurations and guidance

Poultry processing equipment categories Poultry processing process application Check complete model identifiers and suffixes

Reference specification and document status

Download poultry-7-1-automatic-spiral-chicken-feet-scalder-machine-for-poultry-processing-line reference specification and verification checklist

This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.

Applications

Poultry processing workflowExplore poultry processing by process task, source equipment and project conditions.

Capabilities

Poultry processing line planningExplore poultry processing by process task, source equipment and project conditions.

Request specifications

Add company or technical details (optional)

Equipment under review: Automatic Spiral Chicken Feet Scalder Machine for Poultry Processing Line (exact model to confirm)

Start with what you know. You can send drawings or photographs by email.

Continue your technical review

Poultry processing processCompare published equipmentPrepare quotation informationSupplier verification checklistIdentify related replacement parts