Automatic Horizontal Chicken Feet Peeling Machine | Poultry Feet Skin Remover
Automatic Horizontal Chicken Feet Peeling Machine. Compare incoming condition, product range and processing duty; share your requirements for configuration review.

Specification notes
| Model status | Product family; exact model not identified in the supplied section |
|---|---|
| Material | SUS304 Stainless Steel |
| Processing Capacity | 300-1500 kg/h (Customized) |
| Power Supply | 380V / 50Hz or Customized |
| Motor Power | 3-5.5 kW |
| Data status | Source reference R1; configuration requires written confirmation |
Use and process role
Automatic Horizontal Chicken Feet Peeling Machine for Poultry Processing
The Automatic Horizontal Chicken Feet Peeling Machine is specially developed for poultry slaughterhouses and chicken feet processing factories to remove the yellow outer skin from chicken paws after the scalding process.
Chicken feet are an important poultry by-product with high commercial value, especially in frozen food export markets. Before packaging or further cooking processes, the yellow keratinized skin layer must be removed to improve product appearance, cleanliness and market acceptance.
This horizontal chicken feet peeler adopts a continuous rotary peeling structure. Through mechanical friction between the rotating peeling roller, rubber fingers and chicken feet, the loosened yellow skin is efficiently separated from the product surface.
Compared with manual peeling methods, this automatic machine provides:
Higher processing capacity
More stable peeling quality
Reduced labor cost
Better hygiene control
Continuous production capability
The machine can be integrated with chicken feet scalding machines, washing systems, chilling equipment and complete poultry by-product processing lines.
Structure and working principle
After chicken feet are scalded in hot water, they are transferred into the feeding inlet of the horizontal peeling machine.
The motor drives the internal rotating shaft and peeling roller system. During operation, chicken feet continuously tumble and move forward inside the processing chamber.
The relative movement between chicken feet, rubber fingers and the rotating roller creates controlled friction, which removes the loosened yellow outer skin and residual cuticle.
At the same time, clean water spraying washes away removed skin particles and impurities through the drainage system.
After peeling, clean chicken feet are discharged automatically and transferred to the next processing stage, such as washing, chilling, grading or packaging.
Source-listed construction and features
1. Horizontal Continuous Processing Design
The horizontal structure allows smooth product movement and stable processing performance.
Applications and integration
Application of Horizontal Chicken Feet Peeling Machine
The machine is widely used in poultry processing industries where chicken feet are collected as valuable by-products.
Typical applications include:
Poultry slaughterhouses
Chicken feet export processing plants
Frozen food factories
Meat processing companies
Ready-to-cook poultry product manufacturers
Suitable products:
Chicken feet
Chicken paws
Chicken claws
Duck feet (with customized configuration)
In export-oriented poultry plants, the equipment is commonly installed after scalding and before chilling and packaging to achieve standardized product quality.
Selection conditions and project fit
State species, incoming weight and temperature range, upstream scalding condition, required rate, discharge height, water or energy supply and by-product collection. Agree product quality criteria under the actual input conditions.
Evidence, configuration and document status
The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.
Source and version
Reference compilation R1, 2026-11-16. Supplied document: 7. 鸡爪处理设备 FEET PROCESSING.doc; section 7.2. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.
Installation and process interfaces
State the upstream scalding/preparation condition, animal or product range, required rate, discharge height, water or energy connections and collection of hair, feathers or other by-products.
Utilities, control and feedback requirements
Confirm the actual drive arrangement, adjustment range and control scope. Compare performance only under defined input and process conditions; reference rates are not an unconditional yield or quality commitment.
Maintenance and part identification
Request the configuration-specific manual and part references for fingers, rubber elements, scrapers, rollers and drive parts where fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.
Configuration-specific document checklist
Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.
Compare configurations for your project
For Automatic Horizontal Chicken Feet Peeling Machine | Poultry Feet Skin Remover, keep the complete identifier the proposed complete model and configuration attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.
Start with this page's listed reference fields: Model status: Product family; exact model not identified in the supplied section; Material: SUS304 Stainless Steel; Processing Capacity: 300-1500 kg/h (Customized); Power Supply: 380V / 50Hz or Customized; Motor Power: 3-5.5 kW. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.
Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.
Purchasing review and enquiry preparation
Start with Automatic Horizontal Chicken Feet Peeling Machine | Poultry Feet Skin Remover and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.
Use the linked poultry processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.
Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote the proposed complete model and configuration and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.
| Parameter | Specification |
|---|---|
| Equipment Name | Automatic Horizontal Chicken Feet Peeling Machine |
| Application | Chicken feet / chicken paws / poultry claws |
| Machine Type | Horizontal Rotary Peeling Type |
| Material | SUS304 Stainless Steel |
| Processing Capacity | 300-1500 kg/h (Customized) |
| Peeling Rate | ≥95% (Depending on raw material condition) |
| Power Supply | 380V / 50Hz or Customized |
| Motor Power | 3-5.5 kW |
| Operation Type | Automatic Continuous Operation |
| Water Consumption | Adjustable according to production requirement |
| Installation | Stand-alone or Production Line Integration |
Buyer FAQ
What is a chicken feet peeling machine used for?
chicken feet peeling machine is used to remove the yellow outer skin layer from chicken paws after scalding, preparing them for further processing or packaging.
What is the difference between a chicken feet scalder and peeler?
The scalder softens the outer skin through hot water treatment, while the peeler removes the loosened skin mechanically.
What capacity can the horizontal chicken feet peeler achieve?
The capacity depends on machine configuration and production requirements. Industrial models can be customized from several hundred kilograms per hour to larger processing capacities.
What information is needed to select this equipment?
State species, incoming weight and temperature range, upstream scalding condition, required rate, discharge height, water or energy supply and by-product collection. Agree product quality criteria under the actual input conditions.
Are these specifications an approved supply commitment?
No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.
Related configurations and guidance
Reference specification and document status
This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.