SlaughterPro | HUATAOSearch

Arm Type Quarter Carcass Delivery Descend Machine

Arm Type Quarter Carcass Delivery Descend Machine. Compare load range, dimensions and process interfaces; share your requirements for configuration review.

Arm Type Quarter Carcass Delivery Descend Machine — source product-family photograph; confirm the quoted configuration

Specification notes

Model statusProduct family; exact model not identified in the supplied section
Rated Voltage380V / 50Hz / 3 Phase
Motor Power4 kW
Working Capacity200-300 carcasses/hour
Data statusSource reference R1; configuration requires written confirmation

Use and process role

The Arm Type Quarter Carcass Delivery Descend Machine is a specialized handling device used in modern cattle slaughterhouses and beef processing plants for transferring quarter carcasses between different conveyor levels.

During beef carcass processing, quarter carcasses usually move along elevated overhead rails after splitting and chilling procedures. Due to the height difference between processing lines, storage rails, and dispatch areas, manual handling is inefficient and may affect meat hygiene.

This hydraulic arm-type machine uses a stainless steel rotating arm, lifting fork, hydraulic power unit, and control system to smoothly lower quarter carcasses from the upper rail to the designated lower conveyor position.

The equipment helps slaughterhouses reduce manual labor, improve workplace safety, and maintain a continuous carcass transportation process. It is suitable for medium and large-scale cattle abattoirs requiring reliable carcass transfer solutions.

Structure and working principle

The quarter carcass descend machine works through a hydraulic driving system.

After the quarter carcass arrives at the transfer position on the overhead rail, the operator activates the control system. The hydraulic cylinder drives the rotating arm and fork mechanism to move downward smoothly.

The fork supports the carcass hook or trolley, lowers the quarter carcass to the lower conveying rail, and then returns automatically to the original position for the next transfer cycle.

The hydraulic system provides stable movement speed and reduces impact during carcass transfer, preventing damage to meat quality and ensuring safe operation.

Source-listed construction and features

1. Hydraulic Driven Transfer System

The machine adopts a hydraulic power station and cylinder system, providing strong lifting force and stable movement compared with traditional manual transfer methods.

2. Food Grade Stainless Steel Structure

Main contact parts are manufactured from stainless steel materials, providing:

corrosion resistance

easy cleaning

improved food hygiene conditions

3. Smooth Carcass Handling

The rotating arm structure allows quarter carcasses to be transferred gently, reducing swinging and collision during movement.

4. High Load Capacity

Designed for beef quarter carcass handling, the machine can work continuously in industrial slaughter lines.

5. Compact Installation Design

The machine occupies limited floor space and can be integrated into existing cattle slaughterhouse conveyor systems.

6. Improved Worker Safety

Automation reduces direct manual lifting operations and lowers workplace injury risks.

Applications and integration

The Arm Type Quarter Carcass Delivery Descend Machine is mainly applied in:

Beef Slaughterhouses

Used after carcass splitting and quartering processes to transfer beef quarters between elevated rails and lower conveyors.

Meat Processing Plants

Suitable for plants requiring efficient carcass transportation before:

chilling storage

deboning

cutting

packaging

dispatch

Automated Beef Processing Lines

Can be integrated with:

cattle carcass overhead rail systems

quarter carcass cutting systems

weighing systems

cold storage conveyors

Selection conditions and project fit

State product or animal range, required duty and throughput, available space, utilities, connection dimensions and delivery scope. Confirm the configuration and acceptance criteria in writing.

Evidence, configuration and document status

The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.

Source and version

Reference compilation R1, 2026-11-16. Supplied document: 3. 冷却与切割设备.doc; section 3.1. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.

Installation and process interfaces

Provide the load and product range, travel direction, rail/belt section or mating geometry, working heights, supports and maintenance clearances. Similar appearance is not proof of fit.

Utilities, control and feedback requirements

For powered equipment, confirm the matching drive, supply, control and line signals. For passive components, confirm mechanical interfaces and any requirements of the receiving equipment; no powered or feedback capability should be assumed.

Maintenance and part identification

Request the configuration-specific manual and part references for rollers, chains, hooks, bearings, guides and drive elements where applicable. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.

Configuration-specific document checklist

Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.

Compare configurations for your project

For Arm Type Quarter Carcass Delivery Descend Machine, keep the complete identifier the proposed complete model and configuration attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.

Start with this page's listed reference fields: Model status: Product family; exact model not identified in the supplied section; Rated Voltage: 380V / 50Hz / 3 Phase; Motor Power: 4 kW; Working Capacity: 200-300 carcasses/hour. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.

Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.

Purchasing review and enquiry preparation

Start with Arm Type Quarter Carcass Delivery Descend Machine and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.

Use the linked cattle & beef processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.

Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote the proposed complete model and configuration and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.

Source reference configuration 1
ItemSpecification
Equipment NameArm Type Quarter Carcass Delivery Descend Machine
ApplicationBeef quarter carcass transfer
Driving SystemHydraulic system
Rated Voltage380V / 50Hz / 3 Phase
Motor Power4 kW
Rotation RadiusApprox. 2.0 m
Working Capacity200-300 carcasses/hour
Main StructureStainless steel base + rotating arm
Transfer ComponentStainless steel fork
Hydraulic ComponentsOil cylinder + hydraulic station
Control SystemHydraulic control with low pressure protection switch
InstallationFixed installation on slaughterhouse floor

Buyer FAQ

1. What is the main function of an arm type quarter carcass delivery descend machine?

It is used to transfer beef quarter carcasses from a high-level overhead rail to a lower conveyor or loading position during cattle processing.

2. What type of carcass can this machine handle?

It is mainly designed for cattle quarter carcasses after carcass splitting and chilling processes.

5. What materials are used for food processing environments?

The main hygienic components are manufactured using stainless steel to resist corrosion and facilitate cleaning.

What information is needed to select this equipment?

State product or animal range, required duty and throughput, available space, utilities, connection dimensions and delivery scope. Confirm the configuration and acceptance criteria in writing.

Are these specifications an approved supply commitment?

No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.

Related configurations and guidance

Cattle & beef processing equipment categories Cattle & beef processing process application Check complete model identifiers and suffixes

Reference specification and document status

Download cattle-3-1-arm-type-quarter-carcass-delivery-descend-machine reference specification and verification checklist

This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.

Applications

Cattle & beef processing workflowExplore cattle & beef processing by process task, source equipment and project conditions.

Capabilities

Cattle & beef processing line planningExplore cattle & beef processing by process task, source equipment and project conditions.

Request specifications

Add company or technical details (optional)

Equipment under review: Arm Type Quarter Carcass Delivery Descend Machine (exact model to confirm)

Start with what you know. You can send drawings or photographs by email.

Continue your technical review