Cattle Carcass Slope Lifting Machine
Cattle Carcass Slope Lifting Machine. Benchmark reference only; share your duty and interfaces to confirm a proposed configuration.

Specification notes
| Model status | Product-family enquiry; no confirmed HUATAO model in this source |
|---|---|
| Reference provenance | Supplied database includes third-party EME / QE benchmark information |
| Data status | Benchmark values below are not HUATAO supply specifications |
Benchmark provenance — configuration not established
The supplied section includes third-party EME / QE reference information. The benchmark tables below are retained for technical comparison and identifying the questions to ask; they do not establish a HUATAO model, manufacturing specification or offered configuration. Request a separate HUATAO quotation and configuration drawing for this equipment family. Third-party model identifiers are not relabelled as HUATAO models.
Use and process role
The Cattle Carcass Slope Lifting Machine is an automatic inclined lifting system designed for cattle slaughterhouses and beef processing plants.
After cattle slaughtering and bleeding preparation, carcasses usually need to be transferred from a lower collection position to an elevated overhead rail system for continuous transportation.
The slope lifting machine provides an efficient solution by using an inclined conveyor structure to raise carcasses smoothly while maintaining continuous production flow.
Compared with traditional vertical lifting methods, the inclined design provides:
continuous carcass movement
higher processing capacity
smoother connection with overhead rails
better adaptation to long production lines
The equipment is mainly used for:
cattle carcass lifting
bleeding line connection
overhead rail transfer
slaughterhouse production flow improvement
According to EME QE-C109-II specifications, the machine uses an electric drive system, stainless steel or galvanized structure, tube rail/dual rail/flat rail options, and can achieve up to 100 cattle per hour capacity.
Structure and working principle
The Cattle Carcass Slope Lifting Machine works through a motor-driven inclined conveying system.
The operation process:
The cattle carcass is connected to the lifting hook or rail trolley.
The driving motor activates the inclined chain or roller mechanism.
The carcass moves upward along the inclined track.
When reaching the required height, the carcass transfers smoothly onto the overhead bleeding rail.
The carcass continues to the next processing stage.
The lifting system uses controlled movement to ensure stable transportation and reduce impact on the carcass.
Source-listed construction and features
1. Continuous Inclined Carcass Transfer
The inclined lifting structure enables continuous transportation between different production levels.
Applications and integration
1. Cattle Slaughterhouses
The machine is mainly used after:
stunning
bleeding
carcass collection
to transfer carcasses to overhead rail systems.
2. Beef Bleeding Lines
It connects:
Lower carcass working area
↓
Elevated bleeding conveyor rail
3. Beef Processing Plants
Suitable for:
fresh beef production
chilled beef plants
export meat processing facilities
4. Automated Slaughter Systems
Compatible with:
carcass conveyor rail
pulley hook system
carcass weighing equipment
chilling conveyor system
Selection conditions and project fit
Provide rail or belt dimensions, working height, travel direction, carrier spacing, load range, speed and upstream/downstream connection drawings. A similar-looking carrier is not proof of fit.
Evidence, configuration and document status
The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.
Source and version
Reference compilation R1, 2026-11-16. Supplied document: 3. 冷却与切割设备.doc; section 3.11. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.
Installation and process interfaces
Provide the load and product range, travel direction, rail/belt section or mating geometry, working heights, supports and maintenance clearances. Similar appearance is not proof of fit.
Utilities, control and feedback requirements
For powered equipment, confirm the matching drive, supply, control and line signals. For passive components, confirm mechanical interfaces and any requirements of the receiving equipment; no powered or feedback capability should be assumed.
Maintenance and part identification
Request the configuration-specific manual and part references for rollers, chains, hooks, bearings, guides and drive elements where applicable. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.
Configuration-specific document checklist
Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.
Compare configurations for your project
For Cattle Carcass Slope Lifting Machine, keep the complete identifier the proposed complete model and configuration attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.
Start with this page's listed reference fields: Model status: Product-family enquiry; no confirmed HUATAO model in this source; Reference provenance: Supplied database includes third-party EME / QE benchmark information. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.
This record includes third-party benchmark information. It is not confirmation of HUATAO manufacture, supply rights, certified performance or an interchangeable HUATAO model.
Purchasing review and enquiry preparation
Start with Cattle Carcass Slope Lifting Machine and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.
Use the linked cattle & beef processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.
Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote the proposed complete model and configuration and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.
| Item | Specification |
|---|---|
| Product Name | Cattle Carcass Slope Lifting Machine |
| Application | Cattle carcass lifting and transfer |
| Drive System | Electric motor |
| Rated Voltage | 380V / 50Hz / 3 Phase |
| Power | 3 kW |
| Lifting Height | 3.6-5 m |
| Maximum Capacity | 100 heads/hour |
| Dimension | 3600 × 650 × 550 mm (customized) |
| Rail Type | Tube rail / Dual rail / Flat rail |
| Main Material | Stainless steel or hot galvanized steel |
| Control System | Low pressure control switches |
Buyer FAQ
1. What is a cattle carcass slope lifting machine used for?
It is used to lift cattle carcasses from a lower position to an elevated conveyor rail for bleeding and further processing.
2. What is the difference between slope hoist and vertical hoist?
Slope lifting machine: inclined continuous transport higher capacity suitable for long production lines Vertical hoist: straight vertical lifting smaller installation space
3. What is the maximum capacity?
The standard QE-C109-II model can reach approximately 100 cattle/hour.
5. What rail systems are compatible?
It can work with: tube rail dual rail flat rail systems
What information is needed to select this equipment?
Provide rail or belt dimensions, working height, travel direction, carrier spacing, load range, speed and upstream/downstream connection drawings. A similar-looking carrier is not proof of fit.
Are these specifications an approved supply commitment?
No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.
Related configurations and guidance
Reference specification and document status
This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.