SlaughterPro | HUATAOSearch

Cattle Hind Hoof Hydraulic Shear

Cattle Hind Hoof Hydraulic Shear. Benchmark reference only; share your duty and interfaces to confirm a proposed configuration.

Cattle Hind Hoof Hydraulic Shear — source product-family photograph; confirm the quoted configuration

Specification notes

Model statusProduct-family enquiry; no confirmed HUATAO model in this source
Reference provenanceSupplied database includes third-party EME / QE benchmark information
Data statusBenchmark values below are not HUATAO supply specifications

Benchmark provenance — configuration not established

The supplied section includes third-party EME / QE reference information. The benchmark tables below are retained for technical comparison and identifying the questions to ask; they do not establish a HUATAO model, manufacturing specification or offered configuration. Request a separate HUATAO quotation and configuration drawing for this equipment family. Third-party model identifiers are not relabelled as HUATAO models.

Use and process role

The Cattle Hind Hoof Hydraulic Shear is a professional hydraulic cutting tool designed for cattle slaughterhouses and beef processing facilities.

During cattle slaughter processing, the rear hooves need to be removed before further carcass dressing and processing operations. Traditional manual cutting methods require high labor intensity and may affect production efficiency.

This hydraulic hoof shear uses a powerful hydraulic drive system to provide stable cutting force, allowing operators to quickly and accurately remove cattle hind hooves.

The equipment is mainly installed in the cattle carcass processing line after bleeding and re-hanging procedures and works together with:

cattle carcass conveyor rail

hoof sliding chute

hoof dehairing machine

hoof processing equipment

The compact handheld design allows flexible operation while maintaining high cutting efficiency.

Compared with pneumatic or manual tools, hydraulic shears provide:

stronger cutting power

faster operation

consistent cutting results

reduced operator fatigue

Hydraulic cattle hoof cutters are commonly used in industrial slaughterhouses and are manufactured with corrosion-resistant materials suitable for meat processing environments.

Structure and working principle

The Cattle Hind Hoof Hydraulic Shear operates through a hydraulic power system.

During operation:

The operator positions the shear around the cattle hind hoof joint.

The hydraulic unit supplies high-pressure oil to the cutting cylinder.

The hydraulic piston drives the blades together.

The sharp cutting edges generate sufficient force to separate the hoof quickly.

The removed hoof is transferred through the hoof collection or chute system.

The hydraulic system provides stable cutting pressure and reduces the physical effort required from workers.

Source-listed construction and features

1. Powerful Hydraulic Cutting Performance

The hydraulic drive system provides strong cutting force suitable for cattle rear hoof removal.

Applications and integration

The Cattle Hind Hoof Hydraulic Shear is widely used in:

1. Beef Slaughterhouses

Used after cattle slaughter and bleeding procedures to remove rear hooves efficiently.

Typical workflow:

Slaughter → Bleeding → Re-hanging → Hind Hoof Cutting → Dressing

2. Beef Processing Plants

Suitable for plants producing:

fresh beef

chilled beef

frozen beef

export beef products

3. Integrated Cattle Slaughter Lines

Can be combined with:

cattle carcass conveyor system

hoof sliding chute

hoof dehairing machine

carcass processing equipment

4. Large-Scale Meat Processing Facilities

Especially suitable where:

high throughput

consistent cutting quality

hygiene control

are required.

Selection conditions and project fit

State incoming product size and temperature, target cut or separation, rate, output specification, interfaces, blade or tool arrangement and guarding requirements. Agree a representative-product trial and the acceptance criteria.

Evidence, configuration and document status

The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.

Source and version

Reference compilation R1, 2026-11-16. Supplied document: 3. 冷却与切割设备.doc; section 3.10. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.

Installation and process interfaces

Provide product size and condition, target cut or separation, feed/discharge direction, support height and space for tool replacement and maintenance. Confirm the proposed guards, operator access and connection to the receiving station.

Utilities, control and feedback requirements

Check the model-specific drive and electrical or fluid-power supply. Agree start/stop, upstream/downstream interlocks and feedback requirements where relevant. Do not infer a control protocol or tool capability from a family photograph.

Maintenance and part identification

Request the configuration-specific manual and part references for matched blades or tools, drive components, seals and position sensors where fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.

Configuration-specific document checklist

Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.

Compare configurations for your project

For Cattle Hind Hoof Hydraulic Shear, keep the complete identifier the proposed complete model and configuration attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.

Start with this page's listed reference fields: Model status: Product-family enquiry; no confirmed HUATAO model in this source; Reference provenance: Supplied database includes third-party EME / QE benchmark information. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.

This record includes third-party benchmark information. It is not confirmation of HUATAO manufacture, supply rights, certified performance or an interchangeable HUATAO model.

Purchasing review and enquiry preparation

Start with Cattle Hind Hoof Hydraulic Shear and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.

Use the linked cattle & beef processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.

Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote the proposed complete model and configuration and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.

Third-party benchmark reference — not HUATAO specification
ItemSpecification
Product NameCattle Hind Hoof Hydraulic Shear
ApplicationRear hoof cutting in cattle slaughterhouse
Drive SystemHydraulic
Cutting TypeHydraulic blade shear
MaterialStainless steel / corrosion-resistant components
Operation ModeManual handheld operation
Safety ControlDual-hand safety control
Suitable AnimalCattle
InstallationSlaughter line workstation
Compatible EquipmentHoof chute / hoof processing line

Buyer FAQ

1. What is a cattle hind hoof hydraulic shear used for?

It is used to cut and remove cattle rear hooves during slaughter processing.

2. What is the difference between hind hoof shear and horn & hoof hydraulic shear?

The hind hoof hydraulic shear is mainly designed for rear hoof removal, while horn and hoof hydraulic shears are generally used for front hoof and horn cutting operations.

What information is needed to select this equipment?

State incoming product size and temperature, target cut or separation, rate, output specification, interfaces, blade or tool arrangement and guarding requirements. Agree a representative-product trial and the acceptance criteria.

Are these specifications an approved supply commitment?

No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.

Related configurations and guidance

Cattle & beef processing equipment categories Cattle & beef processing process application Check complete model identifiers and suffixes

Reference specification and document status

Download cattle-3-10-cattle-hind-hoof-hydraulic-shear reference specification and verification checklist

This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.

Applications

Cattle & beef processing workflowExplore cattle & beef processing by process task, source equipment and project conditions.

Capabilities

Cattle & beef processing line planningExplore cattle & beef processing by process task, source equipment and project conditions.

Request specifications

Add company or technical details (optional)

Equipment under review: Cattle Hind Hoof Hydraulic Shear (exact model to confirm)

Start with what you know. You can send drawings or photographs by email.

Continue your technical review