Automatic chicken feet cutter | HT-FC3000
Automatic chicken feet cutter. Compare input range, required output and working interfaces; share your requirements for configuration review.

Specification notes
| Model | HT-FC3000 |
|---|---|
| Processing Capacity | 3000-12000 Birds/Hour |
| Main Frame Material | SUS304 Stainless Steel |
| Contact Parts Material | Food Grade Stainless Steel |
| Blade Material | Hardened Stainless Steel |
| Motor Power | 1.5-3 kW (Customized) |
| Drive System | Gear Motor Transmission |
| Dimension | Customized |
| Data status | Source reference R1; configuration requires written confirmation |
Use and process role
Poultry Hock Cutting Equipment for Chicken Slaughterhouse
The Automatic Chicken Feet Cutter Machine is a specialized poultry processing machine designed to separate chicken feet from the carcass automatically after the defeathering process.
In commercial poultry slaughterhouses, chicken feet are an important by-product with high market value. Accurate and efficient feet separation is essential for improving product recovery and reducing manual labor.
Huatao automatic feet cutter is integrated with the overhead conveyor system and performs continuous cutting through a precision positioning and blade system.
The machine is designed for:
Broiler processing plants
Chicken slaughterhouses
Poultry export processing factories
Compared with manual cutting, the automatic chicken feet cutter provides:
Higher cutting accuracy
Stable production speed
Reduced labor requirements
Improved product consistency
It can be connected with complete poultry processing lines including:
Slaughtering system
Defeathering system
Feet processing system
Chilling system
Industrial poultry feet cutting systems are commonly used as part of automated feet processing sections to separate hocks efficiently.
Structure and working principle
The automatic chicken feet cutter is installed on the poultry slaughter line after the hock area has been prepared.
During operation, chicken carcasses move continuously through the overhead conveyor.
When the legs reach the cutting position:
The positioning mechanism guides the chicken legs into the cutting area.
The rotating blade cuts through the joint section.
The separated chicken feet are collected through the discharge system.
The carcass continues to the next processing section.
The cutting position can be adjusted according to:
Chicken size
Conveyor speed
Production requirements
This ensures clean cutting and reduces unnecessary product loss.
Source-listed construction and features
1. Automatic Continuous Operation
The machine works directly with the slaughter line conveyor.
Applications and integration
The automatic chicken feet cutter is mainly used in poultry slaughterhouses where chicken feet need to be separated efficiently from processed carcasses.
After defeathering, chicken carcasses enter the feet processing section. The machine automatically cuts the feet at the joint position and transfers the chicken feet for further processing.
Typical applications include:
Frozen chicken feet export plants
Commercial broiler slaughterhouses
Poultry processing factories
Integrated chicken meat production lines
In many international poultry markets, chicken feet are processed separately for cleaning, chilling, grading and packaging.
Selection conditions and project fit
State incoming product size and temperature, target cut or separation, rate, output specification, interfaces, blade or tool arrangement and guarding requirements. Agree a representative-product trial and the acceptance criteria.
Evidence, configuration and document status
The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.
Source and version
Reference compilation R1, 2026-11-16. Supplied document: 2. 家禽屠宰设备 - 屠宰,烫 脱.doc; section 2.10. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.
Installation and process interfaces
Provide product size and condition, target cut or separation, feed/discharge direction, support height and space for tool replacement and maintenance. Confirm the proposed guards, operator access and connection to the receiving station.
Utilities, control and feedback requirements
Check the model-specific drive and electrical or fluid-power supply. Agree start/stop, upstream/downstream interlocks and feedback requirements where relevant. Do not infer a control protocol or tool capability from a family photograph.
Maintenance and part identification
Request the configuration-specific manual and part references for matched blades or tools, drive components, seals and position sensors where fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.
Configuration-specific document checklist
Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.
Compare configurations for your project
For Automatic chicken feet cutter | HT-FC3000, keep the complete identifier HT-FC3000 attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.
Start with this page's listed reference fields: Processing Capacity: 3000-12000 Birds/Hour; Main Frame Material: SUS304 Stainless Steel; Contact Parts Material: Food Grade Stainless Steel; Blade Material: Hardened Stainless Steel; Motor Power: 1.5-3 kW (Customized). Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.
Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.
Purchasing review and enquiry preparation
Start with Automatic chicken feet cutter | HT-FC3000 and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.
Use the linked poultry processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.
Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-FC3000 and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.
| Parameter | Specification |
|---|---|
| Product Name | Automatic Chicken Feet Cutter Machine |
| Brand | Huatao |
| Model Series | HT-FC Series |
| Application | Chicken Feet Separation |
| Suitable Poultry | Chicken / Broiler |
| Processing Section | Feet Processing Section |
| Installation Position | After Hock Preparation Section |
| Operation Mode | Automatic Continuous Cutting |
| Cutting Method | Rotary Blade Cutting |
| Conveyor Type | Overhead Shackle Conveyor |
| Processing Capacity | 3000-12000 Birds/Hour |
| Main Frame Material | SUS304 Stainless Steel |
| Contact Parts Material | Food Grade Stainless Steel |
| Blade Material | Hardened Stainless Steel |
| Blade Type | Circular Cutting Blade |
| Cutting Accuracy | Adjustable |
| Motor Power | 1.5-3 kW (Customized) |
| Drive System | Gear Motor Transmission |
| Control System | Electrical Control Cabinet |
| Cleaning System | Water Washing |
| Installation Type | Online Conveyor Mounted |
| Dimension | Customized |
| Power Supply | 380V / 50Hz or Customized |
| Model | Capacity | Application |
|---|---|---|
| HT-FC3000 | ≤3000 BPH | Small & Medium Plants |
| HT-FC6000 | ≤6000 BPH | Commercial Processing Lines |
| HT-FC12000 | ≤12000 BPH | Large Poultry Plants |
| Item | Specification |
|---|---|
| Cutting Position | Chicken Hock Joint |
| Cutting Type | Automatic Mechanical Cutting |
| Blade Material | Stainless Steel Alloy |
| Product Output | Separated Chicken Feet |
| Operation | Continuous Online Production |
Buyer FAQ
What is a chicken feet cutter machine?
chicken feet cutter is automatic poultry equipment used to separate chicken feet from the carcass during slaughter processing.
Where is the machine installed?
It is normally installed in the feet processing section after defeathering and hock preparation.
What capacity can the machine handle?
Huatao machines can be customized according to production requirements, commonly from 3000 to 12000 birds per hour.
Can it process ducks or geese?
The standard model is designed for chicken processing. Customized versions are available for other poultry.
What are the main wearing parts?
Main consumable parts include: Cutting blades Bearings Conveyor components
What information is needed to select this equipment?
State incoming product size and temperature, target cut or separation, rate, output specification, interfaces, blade or tool arrangement and guarding requirements. Agree a representative-product trial and the acceptance criteria.
Are these specifications an approved supply commitment?
No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.
Related configurations and guidance
Reference specification and document status
Download HT-FC3000 reference specification and verification checklist
This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.