SlaughterPro | HUATAOSearch

Automatic Chicken Feet Unloader Machine for Poultry Processing Line

Automatic Chicken Feet Unloader Machine. Compare load range, dimensions and process interfaces; share your requirements for configuration review.

Automatic Chicken Feet Unloader Machine for Poultry Processing Line — source product-family photograph; confirm the quoted configuration

Specification notes

ModelHT-FU, HT-FU12000, HT-FU3000, HT-FU6000
Configuration basisMultiple source variants; review the separate tables below
Data statusReference information; confirm exact model and drawing revision

Use and process role

Poultry Feet Hook Detaching Equipment for Chicken Slaughterhouse

The Automatic Chicken Feet Unloader Machine is specially designed for removing processed chicken feet from shackles in modern poultry slaughter lines.

After the feet cutting process, chicken feet remain suspended on the overhead conveyor shackles. The feet unloader automatically releases the feet and transfers them into collection equipment for the next processing stage.

Huatao feet unloader adopts a mechanical unloading structure with rotating rubber fingers or unloading rollers to gently push the feet away from shackles.

Compared with manual unloading methods, the automatic system provides:

Continuous operation

Higher unloading efficiency

Reduced labor requirements

Improved production hygiene

The machine is widely installed in:

Broiler slaughterhouses

Chicken feet export processing plants

Large poultry processing factories

It can work together with:

Automatic feet cutter

Feet washer

Feet scalder

Feet peeler

Feet chilling system

A poultry feet unloader is an important part of modern feet processing systems because it ensures that valuable chicken feet are automatically transferred from the slaughter line into downstream processing.

Structure and working principle

The automatic chicken feet unloader is installed on the overhead shackle conveyor after the feet cutting section.

During operation:

The chicken feet hanging on shackles enter the unloading station together with the conveyor movement.

The rotating unloading rollers equipped with rubber fingers contact the feet and apply upward and forward force.

The feet are released from the shackles and fall into the collection hopper or conveyor below.

The carcass conveyor continues moving to the next processing section.

The unloading process is completed automatically without manual intervention.

Source-listed construction and features

1. Automatic Feet Release System

The equipment automatically removes chicken feet from shackles.

Applications and integration

The automatic chicken feet unloader is mainly used in poultry slaughterhouses where chicken feet are processed as valuable by-products.

After the feet cutter separates the feet from the carcass, the unloader removes them automatically from shackles and sends them to the next processing stage.

Typical applications:

Frozen chicken feet export plants

Commercial broiler slaughterhouses

Poultry by-product processing factories

Integrated chicken processing lines

For countries where chicken feet are an important export product, efficient unloading helps maintain stable production and product quality.

Selection conditions and project fit

State product or animal range, required duty and throughput, available space, utilities, connection dimensions and delivery scope. Confirm the configuration and acceptance criteria in writing.

Evidence, configuration and document status

The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.

Source and version

Reference compilation R1, 2026-11-16. Supplied document: 2. 家禽屠宰设备 - 屠宰,烫 脱.doc; section 2.11. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.

The supplied documents reference one or more identifiers on other equipment pages. A repeated identifier is not proof that specifications, duties or revisions are identical. Review the linked source configurations and request a model-specific drawing before treating them as equivalent.

Installation and process interfaces

Provide the load and product range, travel direction, rail/belt section or mating geometry, working heights, supports and maintenance clearances. Similar appearance is not proof of fit.

Utilities, control and feedback requirements

For powered equipment, confirm the matching drive, supply, control and line signals. For passive components, confirm mechanical interfaces and any requirements of the receiving equipment; no powered or feedback capability should be assumed.

Maintenance and part identification

Request the configuration-specific manual and part references for rollers, chains, hooks, bearings, guides and drive elements where applicable. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.

Configuration-specific document checklist

Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.

Compare configurations for your project

For Automatic Chicken Feet Unloader Machine for Poultry Processing Line, keep the complete identifier HT-FU, HT-FU12000, HT-FU3000, HT-FU6000 attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.

Start with this page's listed reference fields: Configuration basis: Multiple source variants; review the separate tables below. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.

Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.

Purchasing review and enquiry preparation

Start with Automatic Chicken Feet Unloader Machine for Poultry Processing Line and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.

Use the linked poultry processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.

Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-FU, HT-FU12000, HT-FU3000, HT-FU6000 and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.

Source reference configuration 1
ParameterSpecification
Product NameAutomatic Chicken Feet Unloader Machine
BrandHuatao
Model SeriesHT-FU Series
ApplicationPoultry Feet Unloading
Suitable PoultryChicken / Broiler / Duck
Installation PositionAfter Feet Cutter
Working TypeAutomatic Continuous Operation
Unloading MethodRotary Rubber Finger System
Conveyor TypeOverhead Shackle Conveyor
Processing Capacity3000-12000 BPH
Unloading Efficiency≥95%
Main Frame MaterialSUS304 Stainless Steel
Contact MaterialFood Grade Polymer / Stainless Steel
Rubber Finger MaterialFood Grade Rubber
Drive SystemMotor Driven
Motor Power0.75-1.5 kW Customized
Rotating SpeedAdjustable
HopperOptional
Control SystemElectrical Control Cabinet
Cleaning MethodWater Washing
Installation TypeConveyor Mounted
DimensionCustomized
Power Supply380V / 50Hz or Customized
Source reference configuration 2
ModelCapacity
HT-FU3000Up to 3000 BPH
HT-FU6000Up to 6000 BPH
HT-FU12000Up to 12000 BPH
Source reference configuration 3
ItemSpecification
Unloading TargetChicken Feet / Paws
Working PositionFeet Processing Section
Release MethodMechanical Finger Pushing
Efficiency95-99%
OperationAutomatic Continuous

Buyer FAQ

What is a chicken feet unloader?

chicken feet unloader is an automatic machine that removes chicken feet from shackles after the feet cutting process.

Where is it installed?

It is normally installed after the automatic feet cutter and before feet processing equipment.

What is the difference between feet cutter and feet unloader?

The feet cutter separates the feet from the carcass. The feet unloader removes the separated feet from the shackles.

What capacity can it handle?

Huatao feet unloaders can be customized for approximately 3000-12000 birds per hour.

What are the main wearing parts?

Main consumables include: Rubber fingers Bearings Belts Drive components

What information is needed to select this equipment?

State product or animal range, required duty and throughput, available space, utilities, connection dimensions and delivery scope. Confirm the configuration and acceptance criteria in writing.

Are these specifications an approved supply commitment?

No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.

Related configurations and guidance

Related source configuration: Automatic Poultry Feet Unloader Machine for Chicken Processing Line Poultry processing equipment categories Poultry processing process application Check complete model identifiers and suffixes

Reference specification and document status

Download HT-FU, HT-FU12000, HT-FU3000, HT-FU6000 reference specification and verification checklist

This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.

Applications

Poultry processing workflowExplore poultry processing by process task, source equipment and project conditions.

Capabilities

Poultry processing line planningExplore poultry processing by process task, source equipment and project conditions.

Request specifications

Add company or technical details (optional)

Equipment under review: HT-FU, HT-FU12000, HT-FU3000, HT-FU6000

Start with what you know. You can send drawings or photographs by email.

Continue your technical review

Poultry processing processCompare published equipmentPrepare quotation informationSupplier verification checklistIdentify related replacement parts