Automatic Poultry Feet Unloader Machine for Chicken Processing Line
Automatic Poultry Feet Unloader Machine. Compare load range, dimensions and process interfaces; share your requirements for configuration review.

Specification notes
| Model | HT-FU, HT-FU1000, HT-FU12000, HT-FU3000, HT-FU6000 |
|---|---|
| Configuration basis | Multiple source variants; review the separate tables below |
| Data status | Reference information; confirm exact model and drawing revision |
Use and process role
Chicken Feet Removing Equipment from Slaughter Line Shackles
The Automatic Poultry Feet Unloader Machine is designed to automatically remove cut chicken feet from shackles after the feet cutting process in commercial poultry slaughter lines.
In modern poultry processing plants, chicken feet are separated from carcasses by an automatic feet cutter. After cutting, the feet remain attached to the shackles and must be removed before the next processing stage.
Manual removal is inefficient for high-speed production lines. The Huatao feet unloader provides an automatic solution by using mechanical stripping components to push chicken feet out of the shackles and transfer them into collection containers.
The machine helps poultry processors achieve:
Continuous feet unloading
Reduced manual labor
Improved processing efficiency
Better production hygiene
The equipment is suitable for:
Broiler slaughterhouses
Chicken processing plants
Poultry export factories
Automatic slaughtering lines
Automatic foot unloading systems are commonly integrated with overhead conveyor systems to ensure smooth processing after hock/feet cutting operations.
Structure and working principle
The feet unloader is installed after the automatic feet cutter on the overhead conveyor line.
During operation:
Cut chicken feet move together with shackles along the conveyor.
The unloading mechanism contacts the feet or shackle position.
Rubber fingers, stripping plates or rotating components push the feet upward and away from the shackles.
The feet fall into a collection container or conveyor system.
Empty shackles continue to the next processing section.
The unloading force and position are designed to remove feet efficiently while avoiding damage to the shackles.
Source-listed construction and features
1. Automatic Feet Removal From Shackles
The machine eliminates manual unloading operations.
Benefits:
Continuous production
Higher efficiency
Lower labor cost
2. Designed for High-Speed Poultry Lines
Suitable for industrial processing capacities:
3000 BPH
6000 BPH
12000 BPH
(BPH = Birds Per Hour)
3. Reliable Mechanical Unloading Structure
The unloading system uses:
Rubber stripping fingers
Rotating shafts
Guiding components
to ensure stable removal performance.
4. Food Grade Stainless Steel Construction
The main structure adopts SUS304 stainless steel.
Applications and integration
The automatic poultry feet unloader machine is mainly used in chicken slaughterhouses where chicken feet are processed as a valuable by-product.
After the hock cutter or feet cutter separates the feet from the carcass, the feet must be removed from the shackles before:
Feet collection
Feet washing
Feet peeling
Chilling
Packaging
The equipment provides a reliable connection between the feet cutting section and the following processing steps.
Typical applications include:
Large broiler slaughterhouses
Chicken feet export factories
Halal poultry processing plants
Automated poultry processing facilities
Selection conditions and project fit
State product or animal range, required duty and throughput, available space, utilities, connection dimensions and delivery scope. Confirm the configuration and acceptance criteria in writing.
Evidence, configuration and document status
The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.
Source and version
Reference compilation R1, 2026-11-16. Supplied document: 2. 家禽屠宰设备 - 屠宰,烫 脱.doc; section 2.19. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.
Related model references and configuration limits
The supplied documents reference one or more identifiers on other equipment pages. A repeated identifier is not proof that specifications, duties or revisions are identical. Review the linked source configurations and request a model-specific drawing before treating them as equivalent.
Installation and process interfaces
Provide the load and product range, travel direction, rail/belt section or mating geometry, working heights, supports and maintenance clearances. Similar appearance is not proof of fit.
Utilities, control and feedback requirements
For powered equipment, confirm the matching drive, supply, control and line signals. For passive components, confirm mechanical interfaces and any requirements of the receiving equipment; no powered or feedback capability should be assumed.
Maintenance and part identification
Request the configuration-specific manual and part references for rollers, chains, hooks, bearings, guides and drive elements where applicable. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.
Configuration-specific document checklist
Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.
Compare configurations for your project
For Automatic Poultry Feet Unloader Machine for Chicken Processing Line, keep the complete identifier HT-FU, HT-FU1000, HT-FU12000, HT-FU3000, HT-FU6000 attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.
Start with this page's listed reference fields: Configuration basis: Multiple source variants; review the separate tables below. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.
Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.
Purchasing review and enquiry preparation
Start with Automatic Poultry Feet Unloader Machine for Chicken Processing Line and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.
Use the linked poultry processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.
Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-FU, HT-FU1000, HT-FU12000, HT-FU3000, HT-FU6000 and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.
| Parameter | Specification |
|---|---|
| Product Name | Automatic Poultry Feet Unloader Machine |
| Brand | Huatao |
| Model Series | HT-FU Series |
| Application | Chicken Feet Removal From Shackles |
| Suitable Poultry | Chicken / Broiler / Duck |
| Installation Position | After Feet Cutter |
| Working Method | Automatic Mechanical Unloading |
| Conveyor Type | Overhead Shackle Conveyor |
| Unloading Method | Rubber Finger / Stripping System |
| Frame Material | SUS304 Stainless Steel |
| Contact Material | Food Grade Material |
| Processing Capacity | 1000-12000 BPH |
| Motor Power | 0.37-1.5 kW |
| Drive System | Motor Transmission |
| Rotation Speed | Adjustable |
| Compatible Shackle Type | Standard Poultry Shackles |
| Collection Method | Container / Conveyor Collection |
| Control Mode | Automatic Operation |
| Cleaning Method | Water Washing |
| Installation Type | Processing Line Integrated |
| Dimension | Customized |
| Model | Production Capacity |
|---|---|
| HT-FU1000 | 1000 BPH |
| HT-FU3000 | 3000 BPH |
| HT-FU6000 | 6000 BPH |
| HT-FU12000 | 12000 BPH |
| Item | Specification |
|---|---|
| Product | Chicken Feet |
| Input Condition | Cut Feet Hanging On Shackles |
| Output Condition | Feet Removed Into Collection System |
| Operation Mode | Continuous Automatic |
| Installation Section | After Feet Cutter |
| Suitable Line | Broiler Slaughter Line |
Buyer FAQ
What is a poultry feet unloader machine?
It is equipment used to automatically remove chicken feet from shackles after feet cutting.
Where is the feet unloader installed?
Normally installed after the automatic feet cutter.
What is the difference between feet cutter and feet unloader?
The feet cutter separates feet from the carcass. The feet unloader removes the separated feet from the shackles.
What poultry can be processed?
Main applications include: Chicken Broiler Duck Goose
What are the main spare parts?
Common replacement parts: Rubber fingers Bearings Transmission components Drive belts
What information is needed to select this equipment?
State product or animal range, required duty and throughput, available space, utilities, connection dimensions and delivery scope. Confirm the configuration and acceptance criteria in writing.
Are these specifications an approved supply commitment?
No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.
Related configurations and guidance
Reference specification and document status
This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.