SlaughterPro | HUATAOSearch

Poultry Head & Neck Plucker Machine

Poultry Head & Neck Plucker Machine. Compare incoming condition, product range and processing duty; share your requirements for configuration review.

Poultry Head & Neck Plucker Machine — source product-family photograph; confirm the quoted configuration

Specification notes

ModelHT-HNP, HT-HNP12000, HT-HNP3000, HT-HNP6000
Configuration basisMultiple source variants; review the separate tables below
Data statusReference information; confirm exact model and drawing revision

Use and process role

Vertical Head and Neck Feather Removal Equipment for Chicken Processing Line

The Automatic Poultry Head & Neck Plucker Machine is specially designed to remove remaining feathers from the head and neck areas of poultry carcasses after the main defeathering process.

During commercial chicken processing, the main plucking machine can efficiently remove most body feathers, but some fine feathers around the head, neck and shoulder areas may remain due to the special body structure.

The head and neck plucker provides a secondary finishing process to improve carcass appearance and meet higher-quality processing requirements.

Huatao head and neck plucker adopts a vertical rotating plucking system with food-grade rubber fingers. The machine gently contacts the neck and head area while the carcass moves through the processing line.

Main benefits include:

Improved feather removal quality

Reduced manual trimming

Better carcass appearance

Higher processing consistency

The equipment is mainly used in:

Broiler slaughterhouses

Poultry export processing plants

Automatic chicken processing lines

Vertical plucking systems are widely used as finishing equipment after primary defeathering to improve final feather removal results.

Structure and working principle

The head and neck plucker is installed after the main plucking section.

When poultry carcasses pass through the machine on the overhead conveyor:

The rotating plucking discs equipped with rubber fingers contact the head and neck area.

The rubber fingers generate controlled friction against the feathers.

Remaining feathers and small pin feathers are removed.

The cleaned carcasses continue to the next processing stage.

The working height, angle and distance of the plucking units can be adjusted according to:

Bird size

Processing speed

Feather condition

Source-listed construction and features

1. Specialized Head & Neck Feather Removal

Designed specifically for difficult-to-clean areas:

Head

Neck

Shoulder area

Improves overall carcass appearance.

2. Vertical Plucking Structure

The vertical design allows better contact with irregular body areas.

Applications and integration

The automatic head and neck plucker machine is mainly used in commercial poultry slaughterhouses where high-quality carcass finishing is required.

After the primary defeathering process, small feathers may remain around the head, neck and shoulder areas because these parts have uneven surfaces and difficult processing angles.

The machine provides an additional finishing step to improve feather removal results before evisceration and chilling.

Typical applications include:

Large chicken slaughterhouses

Frozen poultry export plants

Halal poultry processing factories

Integrated broiler processing lines

For customers supplying premium fresh or frozen chicken products, this equipment helps achieve cleaner carcass appearance and more stable quality.

Selection conditions and project fit

State species, incoming weight and temperature range, upstream scalding condition, required rate, discharge height, water or energy supply and by-product collection. Agree product quality criteria under the actual input conditions.

Evidence, configuration and document status

The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.

Source and version

Reference compilation R1, 2026-11-16. Supplied document: 2. 家禽屠宰设备 - 屠宰,烫 脱.doc; section 2.15. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.

Installation and process interfaces

State the upstream scalding/preparation condition, animal or product range, required rate, discharge height, water or energy connections and collection of hair, feathers or other by-products.

Utilities, control and feedback requirements

Confirm the actual drive arrangement, adjustment range and control scope. Compare performance only under defined input and process conditions; reference rates are not an unconditional yield or quality commitment.

Maintenance and part identification

Request the configuration-specific manual and part references for fingers, rubber elements, scrapers, rollers and drive parts where fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.

Configuration-specific document checklist

Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.

Compare configurations for your project

For Poultry Head & Neck Plucker Machine, keep the complete identifier HT-HNP, HT-HNP12000, HT-HNP3000, HT-HNP6000 attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.

Start with this page's listed reference fields: Configuration basis: Multiple source variants; review the separate tables below. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.

Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.

Purchasing review and enquiry preparation

Start with Poultry Head & Neck Plucker Machine and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.

Use the linked poultry processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.

Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-HNP, HT-HNP12000, HT-HNP3000, HT-HNP6000 and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.

Source reference configuration 1
ParameterSpecification
Product NameAutomatic Poultry Head & Neck Plucker Machine
BrandHuatao
Model SeriesHT-HNP Series
ApplicationHead & Neck Feather Removal
Suitable PoultryChicken / Broiler
Processing SectionDefeathering Finishing Section
Installation PositionAfter Main Plucker
Working TypeContinuous Automatic Operation
Plucking MethodRotary Disc with Rubber Fingers
Plucking AreaHead / Neck / Shoulder
Machine StructureVertical Cabinet Type
Frame MaterialSUS304 Stainless Steel
Contact MaterialFood Grade Rubber
Number of Plucking DiscsCustomized
Rubber Finger QuantityCustomized
Conveyor SpeedAdjustable
Processing Capacity3000-12000 BPH
Motor Power1.5-5.5 kW Customized
Drive SystemMotor + Transmission
Adjustment MethodManual / Hydraulic Optional
Cleaning MethodWater Washing
Control SystemElectrical Control Cabinet
Installation TypeConveyor Integrated
DimensionCustomized
Source reference configuration 2
ModelCapacity
HT-HNP3000Up to 3000 BPH
HT-HNP6000Up to 6000 BPH
HT-HNP12000Up to 12000 BPH
Source reference configuration 3
ItemSpecification
Target AreaHead & Neck
Removal ObjectRemaining Feathers
Operation ModeContinuous
Suitable ProductionAutomatic Poultry Line
Material StandardFood Grade

Buyer FAQ

What is a head and neck plucker machine?

It is specialized poultry equipment used to remove remaining feathers from chicken head and neck areas after main defeathering.

Why is a separate head and neck plucker required?

Because the head and neck structure makes complete feather removal difficult with standard pluckers.

Where is this machine installed?

Normally installed after the main plucker and before evisceration.

What birds can be processed?

Mainly: Broiler chicken Chicken Similar poultry carcasses

What are the main spare parts?

Common replacement parts include: Rubber plucking fingers Bearings Belts Drive components

What information is needed to select this equipment?

State species, incoming weight and temperature range, upstream scalding condition, required rate, discharge height, water or energy supply and by-product collection. Agree product quality criteria under the actual input conditions.

Are these specifications an approved supply commitment?

No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.

Related configurations and guidance

Poultry processing equipment categories Poultry processing process application Check complete model identifiers and suffixes

Reference specification and document status

Download HT-HNP, HT-HNP12000, HT-HNP3000, HT-HNP6000 reference specification and verification checklist

This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.

Applications

Poultry processing workflowExplore poultry processing by process task, source equipment and project conditions.

Capabilities

Poultry processing line planningExplore poultry processing by process task, source equipment and project conditions.

Request specifications

Add company or technical details (optional)

Equipment under review: HT-HNP, HT-HNP12000, HT-HNP3000, HT-HNP6000

Start with what you know. You can send drawings or photographs by email.

Continue your technical review

Poultry processing processCompare published equipmentPrepare quotation informationSupplier verification checklistIdentify related replacement parts