SlaughterPro | HUATAOSearch

Duck Wax Cooling Pool for Poultry Processing Line

Duck Wax Cooling Pool. Compare product range, residence time and utility conditions; share your requirements for configuration review.

Duck Wax Cooling Pool for Poultry Processing Line — source product-family photograph; confirm the quoted configuration

Specification notes

ModelHT-WCP, HT-WCP1000, HT-WCP10000, HT-WCP3000, HT-WCP6000
Configuration basisMultiple source variants; review the separate tables below
Data statusReference information; confirm exact model and drawing revision

Use and process role

Stainless Steel Poultry Wax Cooling Tank for Duck & Goose Slaughterhouse

The Automatic Duck Wax Cooling Pool is an essential component in modern waterfowl processing lines, designed to cool and solidify the wax coating after the duck or goose waxing process.

Unlike chickens, ducks and geese contain a large number of fine feathers and down that are difficult to remove completely through conventional plucking equipment. Therefore, many commercial duck processing plants use wax dipping technology to capture remaining feathers.

After the carcass passes through the wax dipping section, it enters the wax cooling pool. The cold water rapidly reduces the temperature of the wax layer, causing the wax to become solid and firmly attached to the remaining fine feathers.

After cooling, the carcass enters the dewaxing machine where the hardened wax layer is removed.

Huatao wax cooling pool is designed with:

Food grade stainless steel construction

Stable cooling performance

Continuous conveyor operation

Easy cleaning and maintenance

The equipment is widely used in:

Duck slaughterhouses

Goose processing plants

Waterfowl export processing factories

A properly controlled wax cooling process improves feather removal efficiency and final carcass appearance.

Structure and working principle

The duck carcasses coated with liquid wax enter the cooling pool through the overhead conveyor system.

Inside the cooling tank:

Cold water continuously contacts the wax-coated carcass surface.

Heat is transferred from the wax layer to the cooling medium.

The wax gradually changes from liquid state into a hard solid layer.

The hardened wax captures remaining fine feathers.

The carcasses move to the dewaxing machine for wax peeling.

The cooling temperature and residence time can be adjusted according to:

Duck size

Wax thickness

Conveyor speed

Production capacity

Source-listed construction and features

1. Designed for Duck & Goose Wax Processing

The equipment is specially developed for waterfowl processing lines.

Suitable for:

Duck

Goose

Other wax-treated poultry

2. Efficient Wax Solidification

The cooling system ensures:

Uniform wax hardening

Better wax peeling performance

Reduced feather residue

3. Stainless Steel Hygienic Structure

The tank is manufactured with food-grade stainless steel.

Applications and integration

The automatic duck wax cooling pool is mainly used in duck and goose slaughterhouses where wax dipping technology is applied.

During waterfowl processing, fine feathers around the skin are difficult to remove completely after scalding and mechanical plucking.

The waxing process covers remaining feathers with a wax layer. The cooling pool solidifies this wax coating, allowing the following dewaxing machine to remove wax and feathers together.

Typical applications include:

Duck meat processing plants

Goose slaughterhouses

Frozen duck export factories

Integrated waterfowl processing lines

The wax cooling stage directly affects the efficiency of the following dewaxing process and the appearance quality of finished products.

Selection conditions and project fit

Define product size, residence time, line speed, water quality, temperature, pressure, flow and drainage. Specify the hygiene process and acceptance method; a machine name does not establish a validated hygiene result.

Evidence, configuration and document status

The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.

Source and version

Reference compilation R1, 2026-11-16. Supplied document: 2. 家禽屠宰设备 - 屠宰,烫 脱.doc; section 2.13. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.

Installation and process interfaces

State incoming product condition, process residence time, line speed, working height, water connections, drain location and access for cleaning or component removal. Check the full installation envelope, not only catalogue dimensions.

Utilities, control and feedback requirements

Use only the power, water, heating or cooling values given for the matching source configuration. Confirm operating pressure/flow or temperature, control method and line signals. A reference machine does not establish a validated hygiene or cooling result.

Maintenance and part identification

Request the configuration-specific manual and part references for nozzles, seals, pumps, sensors, conveying elements and any heating/cooling components fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.

Configuration-specific document checklist

Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.

Source-unit confirmation required

The supplied reference does not explicitly state a unit for these fields: Cooling Temperature. The original entries are retained rather than assigning an assumed unit. Confirm the units, matching configuration and operating conditions before comparing these figures or approving a quotation.

Compare configurations for your project

For Duck Wax Cooling Pool for Poultry Processing Line, keep the complete identifier HT-WCP, HT-WCP1000, HT-WCP10000, HT-WCP3000, HT-WCP6000 attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.

Start with this page's listed reference fields: Configuration basis: Multiple source variants; review the separate tables below. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.

Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.

Purchasing review and enquiry preparation

Start with Duck Wax Cooling Pool for Poultry Processing Line and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.

Use the linked poultry processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.

Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-WCP, HT-WCP1000, HT-WCP10000, HT-WCP3000, HT-WCP6000 and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.

Source reference configuration 1
ParameterSpecification
Product NameAutomatic Duck Wax Cooling Pool
BrandHuatao
Model SeriesHT-WCP Series
ApplicationDuck / Goose Wax Cooling
Suitable PoultryDuck, Goose, Waterfowl
Processing SectionWax Cooling Section
Installation PositionAfter Wax Dipping Pool
Cooling MethodChilled Water / Refrigeration System
Cooling Temperature4℃ - 8℃ Adjustable
Tank MaterialSUS304 Stainless Steel
Plate Thickness2-3 mm
Conveyor TypeOverhead Shackle Conveyor
Operation TypeContinuous Cooling
Cooling LengthCustomized
Production Capacity1000-10000 Birds/Hour
Water CirculationContinuous Recycling System
Water SupplyChilled Water System
Drainage SystemIntegrated Drain Outlet
Control SystemTemperature Control Cabinet
Cleaning MethodWater Washing
Installation TypeConveyor Integrated
Power Supply380V / 50Hz Customized
Source reference configuration 2
ModelRecommended Capacity
HT-WCP1000Up to 1000 BPH
HT-WCP3000Up to 3000 BPH
HT-WCP6000Up to 6000 BPH
HT-WCP10000Up to 10000 BPH
Source reference configuration 3
ItemSpecification
Target ProductWax-coated Duck / Goose
Cooling MediumCold Water
Cooling Temperature4-8℃
FunctionWax Solidification
Process ResultReady for Dewaxing

Buyer FAQ

What is a duck wax cooling pool?

duck wax cooling pool is equipment used to cool and harden wax-coated duck or goose carcasses after waxing.

Why is cooling required after wax dipping?

Cooling solidifies the wax layer so that the following dewaxing machine can remove wax and fine feathers effectively.

Is this equipment suitable for chicken processing?

It is mainly designed for duck and goose processing because waterfowl require wax treatment for fine feather removal.

What cooling temperature is required?

Normally the cooling temperature is around 4-8℃, depending on wax type and production requirements.

What are the main wearing parts?

Main maintenance components include: Conveyor chains Water pumps Temperature sensors Drain filters

What information is needed to select this equipment?

Define product size, residence time, line speed, water quality, temperature, pressure, flow and drainage. Specify the hygiene process and acceptance method; a machine name does not establish a validated hygiene result.

Are these specifications an approved supply commitment?

No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.

Related configurations and guidance

Poultry processing equipment categories Poultry processing process application Check complete model identifiers and suffixes

Reference specification and document status

Download HT-WCP, HT-WCP1000, HT-WCP10000, HT-WCP3000, HT-WCP6000 reference specification and verification checklist

This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.

Applications

Poultry processing workflowExplore poultry processing by process task, source equipment and project conditions.

Capabilities

Poultry processing line planningExplore poultry processing by process task, source equipment and project conditions.

Request specifications

Add company or technical details (optional)

Equipment under review: HT-WCP, HT-WCP1000, HT-WCP10000, HT-WCP3000, HT-WCP6000

Start with what you know. You can send drawings or photographs by email.

Continue your technical review

Poultry processing processCompare published equipmentPrepare quotation informationSupplier verification checklistIdentify related replacement parts