Poultry Feather Loosening Machine for Scalding Preparation
Poultry Feather Loosening Machine for Scalding Preparation. Compare product range, residence time and utility conditions; share your requirements for configuration review.

Specification notes
| Model | HT-FLM, HT-FLM12000, HT-FLM3000, HT-FLM6000 |
|---|---|
| Configuration basis | Multiple source variants; review the separate tables below |
| Data status | Reference information; confirm exact model and drawing revision |
Use and process role
Chicken Feather Softening Machine Before Scalding Process
The Automatic Poultry Feather Loosening Machine is specially designed for the preparation stage before poultry scalding.
In modern poultry processing lines, the quality of the scalding process directly affects the efficiency of the following defeathering operation. If feathers are not fully wetted and loosened before scalding, the plucking machine may have difficulty removing feathers completely.
Huatao feather loosening machine adopts a special spiral roller structure equipped with flexible rubber rods. The rotating rollers work together with hot water to create relative movement between the poultry carcass and the rubber fingers.
During operation, the feathers are:
Fully wetted
Loosened from the skin
Prepared for faster heat penetration during scalding
This improves:
Scalding uniformity
Feather removal efficiency
Final carcass appearance
The machine is mainly used in:
Broiler slaughterhouses
Chicken processing factories
Automatic poultry processing lines
Structure and working principle
The feather loosening machine is installed before the scalding machine.
After bleeding, poultry carcasses enter the loosening tank through the conveyor system.
Inside the machine:
The carcasses are immersed in warm water.
Spiral rollers equipped with rubber rods rotate continuously.
The rubber rods gently contact the feathers and skin surface.
The relative movement loosens and separates feathers.
Water penetrates deeper into the feather layer.
The prepared carcasses enter the scalding machine for final feather treatment.
The combination of mechanical loosening and warm water improves scalding efficiency compared with conventional soaking methods.
Source-listed construction and features
1. Spiral Roller Feather Loosening Design
The machine uses specially designed spiral rotating rollers.
Applications and integration
The poultry feather loosening machine is mainly used before the scalding process in automatic chicken slaughter lines.
During poultry processing, feathers naturally contain oil and have a waterproof structure, making it difficult for hot water to penetrate quickly.
The feather loosening process breaks the resistance of the feather layer by mechanical action and warm water contact. This allows the following scalding machine to achieve better heat transfer and more effective feather removal.
Typical applications include:
Broiler slaughterhouses
Chicken processing plants
Large poultry production facilities
Automated poultry slaughter lines
It is especially suitable for factories requiring:
Higher plucking efficiency
Better carcass quality
Stable production speed
Selection conditions and project fit
Define product size, residence time, line speed, water quality, temperature, pressure, flow and drainage. Specify the hygiene process and acceptance method; a machine name does not establish a validated hygiene result.
Evidence, configuration and document status
The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.
Source and version
Reference compilation R1, 2026-11-16. Supplied document: 2. 家禽屠宰设备 - 屠宰,烫 脱.doc; section 2.17. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.
Installation and process interfaces
State incoming product condition, process residence time, line speed, working height, water connections, drain location and access for cleaning or component removal. Check the full installation envelope, not only catalogue dimensions.
Utilities, control and feedback requirements
Use only the power, water, heating or cooling values given for the matching source configuration. Confirm operating pressure/flow or temperature, control method and line signals. A reference machine does not establish a validated hygiene or cooling result.
Maintenance and part identification
Request the configuration-specific manual and part references for nozzles, seals, pumps, sensors, conveying elements and any heating/cooling components fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.
Configuration-specific document checklist
Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.
Compare configurations for your project
For Poultry Feather Loosening Machine for Scalding Preparation, keep the complete identifier HT-FLM, HT-FLM12000, HT-FLM3000, HT-FLM6000 attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.
Start with this page's listed reference fields: Configuration basis: Multiple source variants; review the separate tables below. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.
Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.
Purchasing review and enquiry preparation
Start with Poultry Feather Loosening Machine for Scalding Preparation and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.
Use the linked poultry processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.
Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-FLM, HT-FLM12000, HT-FLM3000, HT-FLM6000 and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.
| Parameter | Specification |
|---|---|
| Product Name | Automatic Poultry Feather Loosening Machine |
| Brand | Huatao |
| Model Series | HT-FLM Series |
| Application | Pre-Scalding Feather Loosening |
| Suitable Poultry | Chicken / Broiler |
| Installation Position | Before Scalding Machine |
| Working Method | Hot Water + Mechanical Loosening |
| Roller Type | Spiral Roller |
| Roller Material | Food Grade Rubber Rod |
| Roller Quantity | Customized |
| Tank Material | SUS304 Stainless Steel |
| Water Temperature | Adjustable According to Process |
| Processing Capacity | 3000-12000 Birds/Hour |
| Conveyor Type | Overhead Shackle Conveyor |
| Drive System | Motor Gear Transmission |
| Motor Power | 3-7.5 kW |
| Rotation Speed | Adjustable |
| Water Circulation | Optional |
| Heating System | Connected With Scalding System |
| Control System | Electrical Control Cabinet |
| Cleaning Method | Water Washing |
| Installation Type | Processing Line Integrated |
| Dimension | Customized |
| Model | Capacity |
|---|---|
| HT-FLM3000 | Up to 3000 BPH |
| HT-FLM6000 | Up to 6000 BPH |
| HT-FLM12000 | Up to 12000 BPH |
| Item | Specification |
|---|---|
| Main Function | Feather Loosening |
| Processing Stage | Before Scalding |
| Medium | Warm Water |
| Contact Method | Spiral Rubber Roller |
| Target Result | Improved Feather Wetting |
| Compatible Equipment | Scalding Machine |
Buyer FAQ
What is a poultry feather loosening machine?
It is equipment installed before scalding to loosen and wet poultry feathers through mechanical rotation and warm water.
What is the difference between feather loosening machine and plucking machine?
feather loosening machine prepares feathers before scalding, while a plucking machine removes feathers after scalding.
Where is this machine installed?
It is normally installed before the scalding machine.
What poultry can use this equipment?
Mainly: Broiler chicken Chicken
What are the main wearing parts?
Main spare parts include: Rubber rods Bearings Spiral rollers Drive components
What information is needed to select this equipment?
Define product size, residence time, line speed, water quality, temperature, pressure, flow and drainage. Specify the hygiene process and acceptance method; a machine name does not establish a validated hygiene result.
Are these specifications an approved supply commitment?
No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.
Related configurations and guidance
Reference specification and document status
This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.