Waxdip Pool
Waxdip Pool. Compare load range, dimensions and process interfaces; share your requirements for configuration review.

Specification notes
| Model | HT-WDP, HT-WDP1000, HT-WDP10000, HT-WDP3000, HT-WDP6000 |
|---|---|
| Configuration basis | Multiple source variants; review the separate tables below |
| Data status | Reference information; confirm exact model and drawing revision |
Use and process role
Stainless Steel Waxing Tank for Duck & Goose Slaughterhouse
The Automatic Duck Wax Dip Pool is a specialized machine used in duck and goose processing lines for removing fine feathers and down after mechanical plucking.
Compared with chickens, ducks and geese have dense waterproof feathers and a large amount of fine down. Traditional plucking equipment cannot completely remove all small feathers, especially around the breast, neck and wing areas.
The waxing process provides an effective solution.
After the duck carcasses pass through the preliminary plucking section, they are immersed into the wax dip pool where melted food-grade wax covers the remaining fine feathers.
After dipping, the carcasses move into the wax cooling pool. The wax layer becomes solid and captures the remaining feathers. The hardened wax is then removed by the dewaxing machine.
Huatao automatic wax dip pool is designed for:
Duck slaughterhouses
Goose processing plants
Waterfowl export processing factories
The system provides:
Uniform wax coating
Stable temperature control
Continuous production operation
Easy integration with overhead conveyor lines
Wax dipping, cooling and dewaxing are commonly arranged as a complete processing section in industrial duck slaughter lines.
Structure and working principle
The duck carcasses enter the wax dip pool through the overhead conveyor after the scalding and plucking process.
During operation:
Food-grade wax is heated and maintained at the required working temperature.
The hanging duck carcasses are lowered into the wax tank.
The melted wax completely covers the skin surface and remaining fine feathers.
After leaving the wax pool, the carcasses move to the cooling section.
The cooled wax layer is removed together with residual feathers during the dewaxing process.
The dipping depth and residence time can be adjusted according to:
Duck size
Wax temperature
Conveyor speed
Production capacity
Source-listed construction and features
1. Uniform Wax Coating
The automatic dipping system ensures complete wax coverage.
Benefits:
Better removal of pin feathers
Improved carcass appearance
More stable processing quality
2. Designed for Duck & Goose Processing
Specially developed for waterfowl.
Suitable for:
Duck
Goose
Other wax-treated poultry
3. Automatic Conveyor Integration
The equipment works with overhead shackle conveyor systems.
Applications and integration
The automatic duck wax dip pool is mainly used in waterfowl slaughterhouses where high-quality feather removal is required.
After scalding and mechanical plucking, ducks and geese still contain small feathers and down that affect the final product appearance.
The wax dipping process creates a complete wax coating around the carcass. After cooling and hardening, the wax layer can be removed efficiently together with remaining feathers.
Typical applications include:
Duck meat processing factories
Goose slaughterhouses
Frozen duck export plants
Large-scale waterfowl processing lines
The equipment is especially suitable for markets requiring high-quality duck skin appearance and clean carcass presentation.
Selection conditions and project fit
State product or animal range, required duty and throughput, available space, utilities, connection dimensions and delivery scope. Confirm the configuration and acceptance criteria in writing.
Evidence, configuration and document status
The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.
Source and version
Reference compilation R1, 2026-11-16. Supplied document: 2. 家禽屠宰设备 - 屠宰,烫 脱.doc; section 2.14. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.
Installation and process interfaces
Provide the load and product range, travel direction, rail/belt section or mating geometry, working heights, supports and maintenance clearances. Similar appearance is not proof of fit.
Utilities, control and feedback requirements
For powered equipment, confirm the matching drive, supply, control and line signals. For passive components, confirm mechanical interfaces and any requirements of the receiving equipment; no powered or feedback capability should be assumed.
Maintenance and part identification
Request the configuration-specific manual and part references for rollers, chains, hooks, bearings, guides and drive elements where applicable. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.
Configuration-specific document checklist
Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.
Source-unit confirmation required
The supplied reference does not explicitly state a unit for these fields: Working Temperature. The original entries are retained rather than assigning an assumed unit. Confirm the units, matching configuration and operating conditions before comparing these figures or approving a quotation.
Compare configurations for your project
For Waxdip Pool, keep the complete identifier HT-WDP, HT-WDP1000, HT-WDP10000, HT-WDP3000, HT-WDP6000 attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.
Start with this page's listed reference fields: Configuration basis: Multiple source variants; review the separate tables below. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.
Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.
Purchasing review and enquiry preparation
Start with Waxdip Pool and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.
Use the linked poultry processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.
Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-WDP, HT-WDP1000, HT-WDP10000, HT-WDP3000, HT-WDP6000 and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.
| Parameter | Specification |
|---|---|
| Product Name | Automatic Duck Wax Dip Pool |
| Brand | Huatao |
| Model Series | HT-WDP Series |
| Application | Duck / Goose Wax Dipping |
| Suitable Poultry | Duck, Goose, Waterfowl |
| Processing Section | Waxing Section |
| Installation Position | After Plucking Section |
| Working Method | Continuous Conveyor Dipping |
| Wax Type | Food Grade Poultry Wax |
| Heating Method | Electric / Steam Heating |
| Temperature Control | Automatic PID Control |
| Working Temperature | 60-90℃ Adjustable |
| Tank Material | SUS304 Stainless Steel |
| Tank Thickness | 2-3 mm |
| Conveyor Type | Overhead Shackle Conveyor |
| Production Capacity | 1000-10000 Birds/Hour |
| Dipping Time | Adjustable |
| Wax Circulation | Optional |
| Wax Filtration | Optional |
| Heating Power | Customized According to Capacity |
| Control System | Electrical Control Cabinet |
| Cleaning Method | Water Washing |
| Installation Type | Integrated With Processing Line |
| Dimension | Customized |
| Model | Recommended Capacity |
|---|---|
| HT-WDP1000 | ≤1000 BPH |
| HT-WDP3000 | ≤3000 BPH |
| HT-WDP6000 | ≤6000 BPH |
| HT-WDP10000 | ≤10000 BPH |
| Item | Specification |
|---|---|
| Processing Target | Duck / Goose Carcass |
| Main Function | Wax Coating |
| Wax Condition | Liquid State |
| Temperature Range | Adjustable |
| Output Process | Ready for Cooling |
| Line Connection | Automatic Conveyor |
Buyer FAQ
What is a duck wax dip pool?
duck wax dip pool is a machine used to coat duck or goose carcasses with melted wax before cooling and dewaxing.
Why is waxing needed for ducks?
Ducks have many fine feathers that are difficult to remove by normal plucking. Waxing helps remove these feathers effectively.
What birds can use this equipment?
Main applications include: Duck Goose Waterfowl
What temperature does the wax pool operate at?
The working temperature depends on the wax material, normally adjusted according to production requirements.
What information is needed to select this equipment?
State product or animal range, required duty and throughput, available space, utilities, connection dimensions and delivery scope. Confirm the configuration and acceptance criteria in writing.
Are these specifications an approved supply commitment?
No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.
Related configurations and guidance
Reference specification and document status
This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.