Poultry Scalder for Chicken Processing Line
Poultry Scalder. Compare product range, residence time and utility conditions; share your requirements for configuration review.

Specification notes
| Model status | Product family; exact model not identified in the supplied section |
|---|---|
| Structure Material | SUS304 Stainless Steel |
| Processing Capacity | Customized |
| Power Supply | 380V / 50Hz or Customized |
| Data status | Source reference R1; configuration requires written confirmation |
Use and process role
Automatic Hot Water Scalding Machine for Chicken, Duck & Goose Slaughterhouse
The Poultry Scalder Machine is an essential piece of equipment in the defeathering section of modern poultry processing plants.
After stunning, bleeding, and killing, poultry carcasses enter the scalding process before going to the plucking machine. The scalder uses controlled hot water temperature to loosen feather follicles, allowing feathers to be removed efficiently during the following defeathering process.
The equipment is designed for continuous operation with an overhead shackle conveyor system. Birds pass through a heated water tank where temperature-controlled water and circulation systems ensure uniform scalding.
Compared with traditional manual scalding methods, an automatic poultry scalder provides:
More stable scalding performance
Better feather removal results
Higher production efficiency
Improved hygiene control
The machine is widely used in:
Chicken slaughterhouses
Duck processing plants
Goose processing factories
Integrated poultry processing projects
A complete poultry processing line usually combines the scalder with:
Stunning machine
Killing system
Bleeding trough
Poultry plucker
Evisceration equipment
Chilling system
Structure and working principle
The poultry scalder works by immersing slaughtered birds into a temperature-controlled hot water tank.
Birds hanging on the overhead conveyor enter the scalding tank and remain submerged for a controlled period. The heated water transfers thermal energy to the skin and feather follicles, weakening the connection between feathers and the carcass.
Inside the tank, water circulation or air agitation helps maintain a uniform temperature and improves heat transfer around the entire bird.
After completing the scalding process, carcasses move directly to the defeathering machine where feathers can be removed more effectively.
The scalding temperature and time can be adjusted according to:
Bird species
Bird size
Production speed
Final product requirements
Different scalding methods are selected depending on processing requirements. Soft scalding is commonly used when skin quality needs to be maintained, while higher-temperature scalding improves feather removal efficiency.
Source-listed construction and features
1. Stable Temperature Control System
The machine is equipped with a temperature monitoring system to maintain stable water conditions during continuous production.
Benefits:
Uniform scalding effect
Reduced production fluctuation
Better plucking performance
2. Stainless Steel Hygienic Structure
The complete machine is manufactured with food-grade stainless steel.
Applications and integration
Chicken Processing Plants
The poultry scalder is mainly installed after the bleeding section and before the defeathering machine in commercial chicken processing plants.
For high-speed broiler processing lines, stable scalding is critical because uneven feather loosening can affect plucking performance and carcass appearance.
Duck and Goose Processing Facilities
Waterfowl usually have stronger feather attachment compared with chickens.
The scalder can be adjusted with suitable temperature and processing time to achieve better feather removal results while protecting carcass quality.
Large Poultry Slaughterhouses
In large automated processing facilities, the scalder works as part of the complete slaughter line.
It connects with:
Live bird handling system
Killing equipment
Bleeding system
Plucking machines
Evisceration line
to provide continuous processing.
Poultry Processing Projects
For new slaughterhouse construction projects, the scalder can be customized according to:
Production capacity
Factory layout
Bird type
Automation requirements
Selection conditions and project fit
Define product size, residence time, line speed, water quality, temperature, pressure, flow and drainage. Specify the hygiene process and acceptance method; a machine name does not establish a validated hygiene result.
Evidence, configuration and document status
The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.
Source and version
Reference compilation R1, 2026-11-16. Supplied document: 2. 家禽屠宰设备 - 屠宰,烫 脱.doc; section 2.3. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.
Installation and process interfaces
State incoming product condition, process residence time, line speed, working height, water connections, drain location and access for cleaning or component removal. Check the full installation envelope, not only catalogue dimensions.
Utilities, control and feedback requirements
Use only the power, water, heating or cooling values given for the matching source configuration. Confirm operating pressure/flow or temperature, control method and line signals. A reference machine does not establish a validated hygiene or cooling result.
Maintenance and part identification
Request the configuration-specific manual and part references for nozzles, seals, pumps, sensors, conveying elements and any heating/cooling components fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.
Configuration-specific document checklist
Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.
Compare configurations for your project
For Poultry Scalder for Chicken Processing Line, keep the complete identifier the proposed complete model and configuration attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.
Start with this page's listed reference fields: Model status: Product family; exact model not identified in the supplied section; Structure Material: SUS304 Stainless Steel; Processing Capacity: Customized; Power Supply: 380V / 50Hz or Customized. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.
Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.
Purchasing review and enquiry preparation
Start with Poultry Scalder for Chicken Processing Line and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.
Use the linked poultry processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.
Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote the proposed complete model and configuration and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.
| Parameter | Specification |
|---|---|
| Product Name | Poultry Scalder Machine |
| Application | Poultry feather loosening |
| Suitable Birds | Chicken, Duck, Goose |
| Heating Method | Electric / Steam Heating |
| Structure Material | SUS304 Stainless Steel |
| Water Temperature | Adjustable |
| Scalding Type | Hot Water Immersion |
| Conveyor Type | Overhead Shackle Conveyor |
| Control System | Automatic Temperature Control |
| Processing Capacity | Customized |
| Installation | Poultry Slaughter Processing Line |
| Power Supply | 380V / 50Hz or Customized |
Buyer FAQ
What is the function of a poultry scalder?
poultry scalder uses hot water to loosen feather follicles before the defeathering process.
Where is the scalder installed in a poultry processing line?
It is installed after killing and bleeding equipment and before the plucking machine.
What birds can use this machine?
It is suitable for: Chicken Duck Goose Turkey
What is the normal scalding temperature?
The temperature depends on bird type and product requirements. Typical commercial scalding processes use different temperature ranges for soft, medium, and hard scalding.
What information is needed to select this equipment?
Define product size, residence time, line speed, water quality, temperature, pressure, flow and drainage. Specify the hygiene process and acceptance method; a machine name does not establish a validated hygiene result.
Are these specifications an approved supply commitment?
No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.
Related configurations and guidance
Reference specification and document status
This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.