Automatic Chicken Tail Plucker Machine for Poultry Processing Line
Automatic Chicken Tail Plucker Machine. Compare incoming condition, product range and processing duty; share your requirements for configuration review.

Specification notes
| Model | HT-TP, HT-TP10000, HT-TP3000, HT-TP6000 |
|---|---|
| Configuration basis | Multiple source variants; review the separate tables below |
| Data status | Reference information; confirm exact model and drawing revision |
Use and process role
The Chicken Tail Plucker Machine is a specialized poultry finishing equipment designed to remove remaining feathers from the tail area after the main defeathering process.
During commercial chicken processing, rough and fine pluckers can remove most feathers from the carcass. However, some feathers may remain around difficult areas such as:
Tail section
Tail gland area
Lower back area
The tail plucker is installed after the main plucking section to perform final feather cleaning and improve carcass appearance.
Compared with manual trimming, the automatic tail plucker provides:
Stable feather removal quality
Higher processing efficiency
Reduced labor requirements
Better hygiene control
It is commonly used in:
Broiler processing plants
Chicken slaughterhouses
Export poultry processing facilities
Structure and working principle
After the chicken carcass passes through the main plucking machines, it enters the tail plucking section.
The tail area contacts specially designed rotating rubber fingers or plucking rollers.
Through controlled mechanical friction, remaining feathers around the tail are removed without damaging the skin.
The machine works continuously with the overhead conveyor system, allowing automatic operation in high-speed poultry processing lines.
Source-listed construction and features
1. Specialized Tail Feather Removal
Designed specifically for difficult-to-clean tail areas.
Effectively removes:
Tail feathers
Small residual feathers
Feather roots around tail area
2. High-Speed Continuous Operation
The machine can be connected with automatic conveyor systems.
Suitable for:
Medium processing lines
High-capacity poultry plants
3. Stainless Steel Food Grade Structure
Manufactured with SUS304 stainless steel.
Applications and integration
The chicken tail plucker is mainly installed in commercial poultry slaughter lines where high carcass appearance quality is required.
For export-oriented chicken processing plants, remaining feathers around the tail area can affect product grading and customer acceptance.
The machine provides a final cleaning step before evisceration and chilling.
Typical applications:
Frozen chicken export plants
Broiler processing factories
Automated poultry slaughterhouses
Selection conditions and project fit
State species, incoming weight and temperature range, upstream scalding condition, required rate, discharge height, water or energy supply and by-product collection. Agree product quality criteria under the actual input conditions.
Evidence, configuration and document status
The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.
Source and version
Reference compilation R1, 2026-11-16. Supplied document: 2. 家禽屠宰设备 - 屠宰,烫 脱.doc; section 2.7. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.
Installation and process interfaces
State the upstream scalding/preparation condition, animal or product range, required rate, discharge height, water or energy connections and collection of hair, feathers or other by-products.
Utilities, control and feedback requirements
Confirm the actual drive arrangement, adjustment range and control scope. Compare performance only under defined input and process conditions; reference rates are not an unconditional yield or quality commitment.
Maintenance and part identification
Request the configuration-specific manual and part references for fingers, rubber elements, scrapers, rollers and drive parts where fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.
Configuration-specific document checklist
Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.
Compare configurations for your project
For Automatic Chicken Tail Plucker Machine for Poultry Processing Line, keep the complete identifier HT-TP, HT-TP10000, HT-TP3000, HT-TP6000 attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.
Start with this page's listed reference fields: Configuration basis: Multiple source variants; review the separate tables below. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.
Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.
Purchasing review and enquiry preparation
Start with Automatic Chicken Tail Plucker Machine for Poultry Processing Line and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.
Use the linked poultry processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.
Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-TP, HT-TP10000, HT-TP3000, HT-TP6000 and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.
| Parameter | Specification |
|---|---|
| Product Name | Chicken Tail Plucker Machine |
| Brand | Huatao |
| Model Series | HT-TP Series |
| Application | Poultry Tail Feather Removal |
| Suitable Poultry | Chicken / Broiler |
| Installation Position | After Fine Plucking Section |
| Processing Type | Automatic Continuous Operation |
| Processing Capacity | 3000-12000 Birds/Hour |
| Conveyor Type | Overhead Shackle Conveyor |
| Plucking Method | Rotary Rubber Finger System |
| Plucking Unit Quantity | Customized |
| Rubber Finger Quantity | Customized |
| Rubber Finger Material | Food Grade Rubber |
| Main Frame Material | SUS304 Stainless Steel |
| Motor Power | Customized According to Capacity |
| Drive System | Motor Driven Rotary System |
| Water Spray System | Optional |
| Control System | Electrical Control Cabinet |
| Installation Type | Conveyor Line Integrated |
| Dimension | Customized |
| Power Supply | 380V / 50Hz or Customized |
| Model | Capacity |
|---|---|
| HT-TP3000 | Up to 3000 BPH |
| HT-TP6000 | Up to 6000 BPH |
| HT-TP10000 | Up to 10000 BPH |
| Processing Stage | Equipment |
|---|---|
| Before Tail Plucker | Vertical / Horizontal Plucker |
| Tail Plucker | Final Tail Feather Removal |
| After Tail Plucker | Evisceration Section |
Buyer FAQ
What is a chicken tail plucker?
tail plucker is a specialized machine used to remove remaining feathers from the tail area after the main defeathering process.
Where is it installed?
Normally installed after rough and fine plucking equipment and before evisceration.
Can it process ducks?
The standard design is mainly for chicken. Duck models can be customized.
What is the processing capacity?
It can be customized according to the slaughter line speed, normally from 3000 to 12000 birds/hour.
What are the main wearing parts?
The main consumable parts are: Rubber plucking fingers Bearings Transmission components
What information is needed to select this equipment?
State species, incoming weight and temperature range, upstream scalding condition, required rate, discharge height, water or energy supply and by-product collection. Agree product quality criteria under the actual input conditions.
Are these specifications an approved supply commitment?
No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.
Related configurations and guidance
Reference specification and document status
Download HT-TP, HT-TP10000, HT-TP3000, HT-TP6000 reference specification and verification checklist
This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.