SlaughterPro | HUATAOSearch

Automatic Chicken Feet Pre-Cutter Machine for Poultry Processing Line

Automatic Chicken Feet Pre-Cutter Machine. Compare input range, required output and working interfaces; share your requirements for configuration review.

Automatic Chicken Feet Pre-Cutter Machine for Poultry Processing Line — source product-family photograph; confirm the quoted configuration

Specification notes

ModelHT-FPC, HT-FPC12000, HT-FPC3000, HT-FPC6000
Configuration basisMultiple source variants; review the separate tables below
Data statusReference information; confirm exact model and drawing revision

Use and process role

Poultry Auto Feet Pre-Cutting Equipment for Chicken Slaughterhouse

The Automatic Chicken Feet Pre-Cutter Machine is a specialized poultry processing equipment designed for the chicken feet processing section of modern slaughter lines.

After defeathering, poultry carcasses are transported by an overhead conveyor system. Before the final feet cutting process, the pre-cutter performs an accurate initial cutting operation at the leg joint area.

The equipment helps improve cutting accuracy and provides better preparation for the following processes, such as:

Automatic feet cutting

Feet unloading

Feet peeling

Feet chilling

Compared with manual cutting methods, the automatic feet pre-cutter provides:

Continuous production

Stable cutting position

Reduced labor requirements

Improved processing efficiency

The machine is widely used in:

Broiler slaughterhouses

Chicken processing plants

Poultry by-product processing facilities

The equipment can be integrated into automatic poultry processing lines with overhead shackle conveyors.

Structure and working principle

The chicken feet pre-cutter is installed along the overhead conveyor line.

During operation, chicken carcasses move continuously through the cutting station while hanging on shackles.

When the feet reach the cutting position, the guide mechanism positions the legs correctly, and the rotating blade performs a precise pre-cut at the designated joint area.

The cutting height and position can be adjusted according to:

Chicken size

Conveyor speed

Processing requirements

After pre-cutting, the carcasses continue to the next station for final feet separation or further processing.

Source-listed construction and features

1. Automatic Continuous Cutting

The machine works together with the poultry conveyor system.

Applications and integration

Chicken Slaughterhouses

The automatic chicken feet pre-cutter is mainly used in commercial broiler processing plants.

After defeathering, chicken carcasses are transferred to the feet processing section where the machine prepares the legs for final cutting.

Chicken Feet Export Processing Plants

Chicken feet are an important by-product in many international poultry markets.

Accurate cutting helps improve:

Product appearance

Processing efficiency

Export product consistency

Automatic Poultry Processing Lines

The machine can be integrated with:

Overhead conveyor

Feet cutter

Feet unloader

Feet peeling machine

Chilling equipment

to create a complete chicken feet processing system.

Selection conditions and project fit

State incoming product size and temperature, target cut or separation, rate, output specification, interfaces, blade or tool arrangement and guarding requirements. Agree a representative-product trial and the acceptance criteria.

Evidence, configuration and document status

The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.

Source and version

Reference compilation R1, 2026-11-16. Supplied document: 2. 家禽屠宰设备 - 屠宰,烫 脱.doc; section 2.8. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.

Installation and process interfaces

Provide product size and condition, target cut or separation, feed/discharge direction, support height and space for tool replacement and maintenance. Confirm the proposed guards, operator access and connection to the receiving station.

Utilities, control and feedback requirements

Check the model-specific drive and electrical or fluid-power supply. Agree start/stop, upstream/downstream interlocks and feedback requirements where relevant. Do not infer a control protocol or tool capability from a family photograph.

Maintenance and part identification

Request the configuration-specific manual and part references for matched blades or tools, drive components, seals and position sensors where fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.

Configuration-specific document checklist

Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.

Compare configurations for your project

For Automatic Chicken Feet Pre-Cutter Machine for Poultry Processing Line, keep the complete identifier HT-FPC, HT-FPC12000, HT-FPC3000, HT-FPC6000 attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.

Start with this page's listed reference fields: Configuration basis: Multiple source variants; review the separate tables below. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.

Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.

Purchasing review and enquiry preparation

Start with Automatic Chicken Feet Pre-Cutter Machine for Poultry Processing Line and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.

Use the linked poultry processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.

Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-FPC, HT-FPC12000, HT-FPC3000, HT-FPC6000 and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.

Source reference configuration 1
ParameterSpecification
Product NameAutomatic Chicken Feet Pre-Cutter Machine
BrandHuatao
Model SeriesHT-FPC Series
ApplicationPoultry Feet Pre-Cutting
Suitable PoultryChicken / Broiler
Processing PositionFeet Cutting Section
Installation PositionAfter Defeathering Section
Conveyor TypeOverhead Shackle Conveyor
Operation ModeAutomatic Continuous Operation
Cutting MethodRotary Blade Cutting
Cutting SystemMechanical Guide + Circular Blade
Processing Capacity3000-12000 Birds/Hour
Cutting AccuracyAdjustable According to Bird Size
Main Frame MaterialSUS304 Stainless Steel
Contact Parts MaterialFood Grade Stainless Steel
Blade MaterialHardened Stainless Steel
Blade DiameterCustomized
Motor PowerApprox. 1.5-3 kW (Customized)
Drive SystemMotor Driven
Conveyor SpeedAdjustable According to Line Capacity
Control SystemElectrical Control Cabinet
Installation TypeConveyor Line Mounted
Cleaning MethodWater Washing
Power Supply380V / 50Hz or Customized
CustomizationAvailable
Source reference configuration 2
ModelCapacityApplication
HT-FPC3000Up to 3000 BPHSmall & Medium Poultry Plants
HT-FPC6000Up to 6000 BPHCommercial Chicken Processing Lines
HT-FPC12000Up to 12000 BPHIndustrial Poultry Slaughterhouses
Source reference configuration 3
ItemSpecification
Cutting TypeRotary Blade
Cutting PositionChicken Leg Joint Area
Blade MaterialFood Grade Hardened Steel
AdjustmentAdjustable Cutting Height

Buyer FAQ

What is a chicken feet pre-cutter?

chicken feet pre-cutter is a machine used before the final feet cutting process to prepare accurate cutting positions on poultry legs.

Where is it installed?

It is normally installed after defeathering and before the automatic feet cutter.

What capacity can it handle?

The machine can be customized for different slaughter line speeds, commonly from 3000 to 12000 birds per hour.

Can it process ducks or geese?

The standard model is designed for chicken processing. Customized versions can be developed for other poultry.

What are the wearing parts?

Main wearing parts include: Cutting blades Bearings Transmission components

What information is needed to select this equipment?

State incoming product size and temperature, target cut or separation, rate, output specification, interfaces, blade or tool arrangement and guarding requirements. Agree a representative-product trial and the acceptance criteria.

Are these specifications an approved supply commitment?

No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.

Related configurations and guidance

Poultry processing equipment categories Poultry processing process application Check complete model identifiers and suffixes

Reference specification and document status

Download HT-FPC, HT-FPC12000, HT-FPC3000, HT-FPC6000 reference specification and verification checklist

This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.

Applications

Poultry processing workflowExplore poultry processing by process task, source equipment and project conditions.

Capabilities

Poultry processing line planningExplore poultry processing by process task, source equipment and project conditions.

Request specifications

Add company or technical details (optional)

Equipment under review: HT-FPC, HT-FPC12000, HT-FPC3000, HT-FPC6000

Start with what you know. You can send drawings or photographs by email.

Continue your technical review

Poultry processing processCompare published equipmentPrepare quotation informationSupplier verification checklistIdentify related replacement parts