Automatic Chain Plate Chicken Feet Scalder Machine | Poultry Feet Scalding Equipment
Automatic Chain Plate Chicken Feet Scalder Machine. Compare product range, residence time and utility conditions; share your requirements for configuration review.

Supplied product-directory reference image: equipment family or process context. It is not proof of an exact model, HUATAO installation or certification. Confirm the proposed configuration photograph and drawing before ordering.
Specification notes
| Model status | Product family; exact model not identified in the supplied section |
|---|---|
| Material | SUS304 Stainless Steel |
| Processing Capacity | 500-5000 kg/h (Customized) |
| Drive System | Gear Motor Drive |
| Voltage | 380V / 50Hz or Customized |
| Data status | Source reference R1; configuration requires written confirmation |
Use and process role
Automatic Chain Plate Chicken Feet Scalder Machine for Poultry Processing
The Automatic Chain Plate Chicken Feet Scalder Machine is a professional processing equipment designed for poultry slaughterhouses and chicken feet processing plants to prepare chicken paws before the peeling process.
During chicken feet processing, the yellow outer skin layer needs to be softened before entering the peeling machine. This equipment uses a continuous chain plate conveying system to transport chicken feet through hot water, ensuring stable heating time and uniform scalding performance.
Compared with traditional manual soaking methods, the automatic chain plate scalder provides better processing consistency, higher production efficiency and improved food hygiene.
The machine is mainly installed after chicken feet cutting and before:
Chicken Feet Peeling Machine
Washing System
Chilling Equipment
Packaging Line
The chain plate conveyor allows chicken feet to move smoothly through the scalding chamber while maintaining sufficient contact with hot water.
This design is especially suitable for medium and large poultry processing plants requiring continuous production.
The complete chicken feet processing workflow:
Chicken Feet Cutting
↓
Automatic Chain Plate Feet Scalder
Chicken Feet Peeling
Cleaning & Inspection
Cooling & Packaging
Structure and working principle
After chicken feet are separated from poultry carcasses, they are automatically transferred into the inlet of the chain plate scalder.
The motor-driven chain plate conveyor continuously moves chicken feet through the heated water tank.
During transportation, chicken feet remain fully immersed in hot water. The controlled temperature and adjustable conveying speed ensure sufficient scalding time.
The heating process softens the yellow keratinized skin layer and loosens the connection between the outer skin and chicken feet surface.
After completing the scalding process, the treated chicken feet are automatically discharged and transferred to the peeling machine.
The combination of:
continuous chain conveying,
stable hot water circulation,
adjustable processing time,
ensures consistent preparation quality for the following peeling process.
Source-listed construction and features
1. Chain Plate Continuous Conveying System
The machine adopts a stainless steel chain plate conveyor structure.
Applications and integration
Application of Automatic Chain Plate Chicken Feet Scalder
The chain plate chicken feet scalder is widely used in poultry processing plants where chicken feet are processed as valuable by-products.
Typical applications include:
Chicken slaughterhouses
Frozen chicken feet export factories
Poultry meat processing companies
Food processing plants
Large-scale poultry production facilities
The equipment is suitable for processing:
Broiler chicken feet
Chicken paws
Chicken claws
Duck feet (with customized design)
For export-oriented chicken feet processors, the machine helps improve product appearance, processing efficiency and production hygiene.
Selection conditions and project fit
Define product size, residence time, line speed, water quality, temperature, pressure, flow and drainage. Specify the hygiene process and acceptance method; a machine name does not establish a validated hygiene result.
Evidence, configuration and document status
The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.
Source and version
Reference compilation R1, 2026-11-16. Supplied document: 7. 鸡爪处理设备 FEET PROCESSING.doc; section 7.4. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.
Installation and process interfaces
State incoming product condition, process residence time, line speed, working height, water connections, drain location and access for cleaning or component removal. Check the full installation envelope, not only catalogue dimensions.
Utilities, control and feedback requirements
Use only the power, water, heating or cooling values given for the matching source configuration. Confirm operating pressure/flow or temperature, control method and line signals. A reference machine does not establish a validated hygiene or cooling result.
Maintenance and part identification
Request the configuration-specific manual and part references for nozzles, seals, pumps, sensors, conveying elements and any heating/cooling components fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.
Configuration-specific document checklist
Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.
Compare configurations for your project
For Automatic Chain Plate Chicken Feet Scalder Machine | Poultry Feet Scalding Equipment, keep the complete identifier the proposed complete model and configuration attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.
Start with this page's listed reference fields: Model status: Product family; exact model not identified in the supplied section; Material: SUS304 Stainless Steel; Processing Capacity: 500-5000 kg/h (Customized); Drive System: Gear Motor Drive; Voltage: 380V / 50Hz or Customized. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.
Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.
Purchasing review and enquiry preparation
Start with Automatic Chain Plate Chicken Feet Scalder Machine | Poultry Feet Scalding Equipment and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.
Use the linked poultry processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.
Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote the proposed complete model and configuration and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.
| Parameter | Specification |
|---|---|
| Equipment Name | Automatic Chain Plate Chicken Feet Scalder Machine |
| Application | Chicken feet / chicken paws |
| Conveyor Type | Stainless Steel Chain Plate Conveyor |
| Material | SUS304 Stainless Steel |
| Heating Method | Hot Water Heating |
| Operation Type | Automatic Continuous Processing |
| Processing Capacity | 500-5000 kg/h (Customized) |
| Scalding Temperature | Adjustable according to product requirements |
| Processing Time | Adjustable by conveyor speed |
| Drive System | Gear Motor Drive |
| Control System | Automatic Electrical Control |
| Voltage | 380V / 50Hz or Customized |
| Installation | Stand-alone or Integrated Processing Line |
Buyer FAQ
What is the function of a chicken feet scalder machine?
chicken feet scalder machine softens the yellow outer skin of chicken paws before peeling, making the skin removal process easier and more efficient.
What is the difference between chain plate and spiral chicken feet scalder?
The spiral scalder uses a screw conveying structure, while the chain plate scalder transports chicken feet through the heating tank using a continuous chain conveyor system. The chain plate type is usually preferred for larger continuous production lines.
What temperature is required for chicken feet scalding?
The operating temperature depends on chicken feet size and processing requirements. It is normally adjusted according to the peeling performance after scalding.
What material is used for the equipment?
The main structure uses food-grade stainless steel such as SUS304, suitable for poultry processing environments.
What information is needed to select this equipment?
Define product size, residence time, line speed, water quality, temperature, pressure, flow and drainage. Specify the hygiene process and acceptance method; a machine name does not establish a validated hygiene result.
Are these specifications an approved supply commitment?
No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.
Related configurations and guidance
Reference specification and document status
This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.