Sheep Bleeding Manual Convey Rail System | HT-S105-II
Sheep Bleeding Manual Convey Rail System. Compare load range, dimensions and process interfaces; share your requirements for configuration review.

Supplied product-directory reference image: equipment family or process context. It is not proof of an exact model, HUATAO installation or certification. Confirm the proposed configuration photograph and drawing before ordering.
Specification notes
| Model | HT-S105-II |
|---|---|
| Tube Rail Size | Ø60 × 4 mm Stainless Steel Tube |
| Dual Rail Size | 40 × 40 × 4 mm Stainless Steel Rail |
| Hook Material | Stainless Steel / Galvanized Steel |
| Data status | Source reference R1; configuration requires written confirmation |
Use and process role
Sheep Bleeding Manual Convey Rail System for Sheep & Goat Slaughterhouses
The Sheep Bleeding Manual Convey Rail System is specially designed for sheep and goat slaughterhouses to manually hang and transfer carcasses during the bleeding process.
After slaughtering, sheep or goats are suspended from the bleeding rail, allowing blood to drain completely before entering the next processing stage.
The manual convey rail provides a simple, reliable and economical solution for small and medium-scale sheep slaughter plants.
Unlike fully automatic conveyor systems, this manual rail system allows workers to manually push carcasses along the rail while maintaining a controlled processing flow.
The system is widely used in:
Sheep slaughterhouses
Goat abattoirs
Halal slaughter facilities
Small and medium meat processing plants
The equipment can be connected with:
Sheep killing table
Bleeding slope lifting machine
Carcass processing rail
Skinning station
Evisceration area
The bleeding stage is a critical part of sheep and goat slaughter processing. Proper hanging and bleeding time help improve meat quality and maintain hygienic processing conditions.
Structure and working principle
The sheep bleeding manual convey rail works through a suspended rail and hook transportation system.
Process sequence
After slaughtering, the sheep/goat hind leg is attached to a bleeding hook.
The carcass is lifted onto the overhead rail system.
Workers manually push the carcass along the rail.
The carcass remains hanging vertically during bleeding.
After sufficient bleeding time, the carcass is transferred to the next processing station.
The system provides continuous movement while maintaining simple operation and low maintenance requirements.
Source-listed construction and features
1. Simple Manual Operation
The system uses manual pushing instead of complex automatic drive mechanisms.
Applications and integration
Sheep & Goat Slaughterhouse Application
The manual bleeding convey rail is mainly installed immediately after slaughter.
Typical process:
Live Sheep Receiving
↓
Stunning / Halal Killing
Bleeding Manual Convey Rail
Hoof & Head Removal
Skinning
Evisceration
Carcass Chilling
Suitable Industries
1. Small Sheep Abattoirs
Ideal for plants requiring economical slaughter solutions.
2. Goat Processing Plants
Suitable for goat carcass bleeding transportation.
3. Halal Meat Processing Facilities
Commonly used in halal slaughter workflows.
4. Developing Meat Processing Projects
Suitable for customers requiring reliable equipment with moderate investment.
Selection conditions and project fit
Provide rail or belt dimensions, working height, travel direction, carrier spacing, load range, speed and upstream/downstream connection drawings. A similar-looking carrier is not proof of fit.
Evidence, configuration and document status
The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.
Source and version
Reference compilation R1, 2026-11-16. Supplied document: 1. 羊致昏 屠宰 放血设备.doc; section 1.10. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.
Installation and process interfaces
Provide the load and product range, travel direction, rail/belt section or mating geometry, working heights, supports and maintenance clearances. Similar appearance is not proof of fit.
Utilities, control and feedback requirements
For powered equipment, confirm the matching drive, supply, control and line signals. For passive components, confirm mechanical interfaces and any requirements of the receiving equipment; no powered or feedback capability should be assumed.
Maintenance and part identification
Request the configuration-specific manual and part references for rollers, chains, hooks, bearings, guides and drive elements where applicable. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.
Configuration-specific document checklist
Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.
Compare configurations for your project
For Sheep Bleeding Manual Convey Rail System | HT-S105-II, keep the complete identifier HT-S105-II attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.
Start with this page's listed reference fields: Tube Rail Size: Ø60 × 4 mm Stainless Steel Tube; Dual Rail Size: 40 × 40 × 4 mm Stainless Steel Rail; Hook Material: Stainless Steel / Galvanized Steel. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.
Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.
Purchasing review and enquiry preparation
Start with Sheep Bleeding Manual Convey Rail System | HT-S105-II and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.
Use the linked sheep & goat processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.
Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-S105-II and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.
| Item | Specification |
|---|---|
| Product Name | Sheep Bleeding Manual Convey Rail System |
| Model | HT-S105-II |
| Application | Sheep / Goat Bleeding Transportation |
| Operation Type | Manual Transfer |
| Rail Height | 2800–3000 mm |
| Hanger Distance | 600–800 mm |
| Rail Type | Tube Rail / Dual Orbit Rail |
| Tube Rail Size | Ø60 × 4 mm Stainless Steel Tube |
| Dual Rail Size | 40 × 40 × 4 mm Stainless Steel Rail |
| Main Structure | Hot Galvanized Steel / Stainless Steel |
| Hook Material | Stainless Steel / Galvanized Steel |
| Suitable Animals | Sheep, Goat, Lamb |
Buyer FAQ
What is a sheep bleeding manual convey rail used for?
It is used to hang and manually transfer sheep/goat carcasses during the bleeding process after slaughter.
What is the difference between manual rail and automatic conveyor?
Manual rail: Lower investment Simple operation Suitable for small and medium plants utomatic conveyor: Higher automation Continuous automatic movement Suitable for large production lines
What height should the bleeding rail be installed?
The standard installation height is approximately 2800–3000 mm depending on factory layout.
What information is needed to select this equipment?
Provide rail or belt dimensions, working height, travel direction, carrier spacing, load range, speed and upstream/downstream connection drawings. A similar-looking carrier is not proof of fit.
Are these specifications an approved supply commitment?
No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.
Related configurations and guidance
Reference specification and document status
Download HT-S105-II reference specification and verification checklist
This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.