Sheep Goat Collect & Killing Roller Table for Slaughterhouse | HT-S103-II
Sheep Goat Collect & Killing Roller Table. Compare load range, dimensions and process interfaces; share your requirements for configuration review.

Specification notes
| Model | HT-S103-II |
|---|---|
| Overall Size | 900 × 600 × 820/700 mm |
| Frame Material | 304 Stainless Steel |
| Roller Material | Stainless Steel |
| Data status | Source reference R1; configuration requires written confirmation |
Use and process role
Sheep Goat Collect & Killing Roller Table for Modern Slaughterhouses
The Sheep Goat Collect & Killing Roller Table is a specialized slaughterhouse workstation designed for collecting, positioning and processing live sheep and goats before bleeding.
It is mainly installed in the stunning, killing and bleeding section of sheep/goat slaughter lines.
The roller table provides a controlled working platform where animals can be transferred, positioned and slaughtered efficiently. The integrated roller structure helps operators move animals smoothly, while the stainless steel blood collection tank collects blood generated during the slaughter process.
Compared with traditional manual ground slaughter methods, this equipment provides:
Better working hygiene
Improved operator efficiency
More organized slaughter workflow
Reduced contamination risk
The equipment is widely used in:
Sheep slaughterhouses
Goat abattoirs
Halal meat processing plants
Small and medium livestock processing facilities
According to HT specifications, the HT-S103-II living sheep collect and killing roller table is designed specifically for collecting sheep/goat before killing and bleeding, using a 304 stainless steel frame, stainless steel rollers and blood collection tank.
Structure and working principle
The sheep/goat collect and killing roller table works as a manual-assisted slaughter platform.
The operating process:
Live sheep or goats are transferred from the holding area onto the roller table.
The rollers allow smooth animal movement and positioning.
Operators perform halal killing or slaughter operations on the platform.
Blood flows into the stainless steel collection tank underneath.
After bleeding preparation, the animal is transferred to the bleeding conveyor or carcass processing system.
The roller structure improves animal handling efficiency while maintaining a cleaner slaughter environment.
Source-listed construction and features
1. Stainless Steel Hygienic Structure
The whole working platform is designed with food processing requirements.
Main materials:
304 stainless steel frame
Stainless steel rollers
Stainless steel blood collection tank
Applications and integration
Manual halal killing
Small-scale sheep processing
Goat slaughter production
6. Easy Maintenance
The simple mechanical structure allows:
Easy washing
Convenient inspection
Low maintenance cost
Sheep & Goat Slaughterhouse Application
The roller killing table is mainly used in the first stage of sheep/goat slaughter processing.
Typical process flow:
Live Sheep Receiving
↓
Holding Area
Collect & Killing Roller Table
Bleeding System
Carcass Conveyor
Skinning
Evisceration
Chilling
Suitable Industries
1. Sheep Slaughterhouses
Used for organized sheep killing operations.
2. Goat Processing Plants
Suitable for goat meat production facilities.
3. Halal Meat Factories
Provides a suitable platform for halal slaughter procedures.
4. Small and Medium Abattoirs
Ideal for projects requiring economical slaughter equipment.
Selection conditions and project fit
Provide species, full live-weight and size range, required rate, animal handling procedure, operator position, entry/exit interfaces and destination requirements. Safety arrangements and the applicable procedure require project-specific engineering confirmation.
Evidence, configuration and document status
The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.
Source and version
Reference compilation R1, 2026-11-16. Supplied document: 1. 羊致昏 屠宰 放血设备.doc; section 1.11. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.
Installation and process interfaces
Provide the load and product range, travel direction, rail/belt section or mating geometry, working heights, supports and maintenance clearances. Similar appearance is not proof of fit.
Utilities, control and feedback requirements
For powered equipment, confirm the matching drive, supply, control and line signals. For passive components, confirm mechanical interfaces and any requirements of the receiving equipment; no powered or feedback capability should be assumed.
Maintenance and part identification
Request the configuration-specific manual and part references for rollers, chains, hooks, bearings, guides and drive elements where applicable. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.
Configuration-specific document checklist
Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.
Compare configurations for your project
For Sheep Goat Collect & Killing Roller Table for Slaughterhouse | HT-S103-II, keep the complete identifier HT-S103-II attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.
Start with this page's listed reference fields: Overall Size: 900 × 600 × 820/700 mm; Frame Material: 304 Stainless Steel; Roller Material: Stainless Steel. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.
Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.
Purchasing review and enquiry preparation
Start with Sheep Goat Collect & Killing Roller Table for Slaughterhouse | HT-S103-II and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.
Use the linked sheep & goat processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.
Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-S103-II and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.
| Item | Specification |
|---|---|
| Product Name | Sheep Goat Collect & Killing Roller Table |
| Model | HT-S103-II |
| Application | Sheep & Goat Slaughterhouse |
| Function | Animal Collection, Killing & Blood Collection |
| Overall Size | 900 × 600 × 820/700 mm |
| Frame Material | 304 Stainless Steel |
| Roller Material | Stainless Steel |
| Roller Diameter | Ø38 mm |
| Roller Spacing | 50 mm |
| Blood Tank | Stainless Steel Integrated Tank |
| Operation Type | Manual Operation |
| Suitable Animals | Sheep, Goat, Lamb |
Buyer FAQ
What is a sheep collect and killing roller table used for?
It is used for collecting, positioning and slaughtering live sheep/goats before the bleeding process.
What is the difference between a killing roller table and a normal killing table?
roller table includes stainless steel rollers that help move animals more smoothly, while a normal killing table is mainly a fixed working platform.
What material is used for the equipment?
The main structure uses 304 stainless steel, including the frame, rollers and blood collection tank.
What information is needed to select this equipment?
Provide species, full live-weight and size range, required rate, animal handling procedure, operator position, entry/exit interfaces and destination requirements. Safety arrangements and the applicable procedure require project-specific engineering confirmation.
Are these specifications an approved supply commitment?
No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.
Related configurations and guidance
Reference specification and document status
Download HT-S103-II reference specification and verification checklist
This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.