SlaughterPro | HUATAOSearch

Sheep Head Cutting Machine | HT-S306

Sheep Head Cutting Machine. Compare input range, required output and working interfaces; share your requirements for configuration review.

Sheep Head Cutting Machine — source product-family photograph; confirm the quoted configuration

Specification notes

ModelHT-S306
Drive SystemHydraulic
Construction MaterialStainless Steel / Hot Galvanized Steel
Data statusSource reference R1; configuration requires written confirmation

Use and process role

Professional Hydraulic Sheep Head Cutting Machine for Sheep & Goat Processing

The Sheep Head Cutting Machine is a specialized hydraulic cutting device developed for sheep and goat slaughterhouses. It is primarily used to split or open the sheep head after removal from the carcass, allowing efficient inspection, brain extraction, and by-product processing.

Installed in the head processing section of the slaughter line, this machine provides a clean and consistent cut while significantly reducing manual labor compared with traditional cutting methods. The hydraulic drive delivers stable cutting force, making it suitable for continuous industrial production.

The machine is widely used in:

Sheep slaughterhouses

Goat slaughter plants

Halal meat processing facilities

By-product processing workshops

Rendering and edible offal processing plants

According to the referenced HT product, the HT-S306 Hydraulic Sheep Head Splitter is mainly used to open sheep heads using a hydraulic cutting mechanism.

Structure and working principle

After the sheep or goat head is removed from the carcass, it is positioned securely on the cutting platform.

A hydraulic cylinder drives the cutting blade downward with controlled force, splitting the head accurately along the center line. The processed head can then be transferred to inspection, cleaning, or further by-product processing.

Hydraulic operation provides stable cutting pressure, improves operator safety, and ensures consistent cutting quality during continuous production.

Source-listed construction and features

Heavy-Duty Hydraulic Drive

The hydraulic power system generates strong cutting force for fast and reliable head splitting.

Accurate Cutting Performance

The precision-guided blade ensures clean and uniform cuts, helping improve downstream inspection and processing efficiency.

Hygienic Stainless Steel Construction

Food-contact parts are manufactured from stainless steel for:

Excellent corrosion resistance

Easy cleaning

Long service life

Safe Operation

The machine minimizes manual handling during cutting, improving operator safety while maintaining stable production.

Compact Industrial Design

Its compact footprint allows installation in existing sheep or goat slaughterhouses without requiring significant layout changes.

Easy Integration

The machine can be connected with:

Sheep Carcass Conveyor

Head Transfer Conveyor

Head Washing Machine

Head Inspection Table

By-product Processing Line

Applications and integration

The Sheep Head Cutting Machine is installed after the head removal station and before head inspection or further processing.

Typical process flow:

Live Sheep

↓

Stunning & Bleeding

Skinning

Head Removal

Sheep Head Cutting Machine

Head Inspection

Brain / Tongue Processing

By-product Processing

Suitable applications include:

Sheep slaughterhouses

Goat slaughterhouses

Halal meat plants

Export meat processing facilities

By-product processing workshops

Selection conditions and project fit

State incoming product size and temperature, target cut or separation, rate, output specification, interfaces, blade or tool arrangement and guarding requirements. Agree a representative-product trial and the acceptance criteria.

Evidence, configuration and document status

The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.

Source and version

Reference compilation R1, 2026-11-16. Supplied document: 1. 羊致昏 屠宰 放血设备.doc; section 1.14. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.

Installation and process interfaces

Provide product size and condition, target cut or separation, feed/discharge direction, support height and space for tool replacement and maintenance. Confirm the proposed guards, operator access and connection to the receiving station.

Utilities, control and feedback requirements

Check the model-specific drive and electrical or fluid-power supply. Agree start/stop, upstream/downstream interlocks and feedback requirements where relevant. Do not infer a control protocol or tool capability from a family photograph.

Maintenance and part identification

Request the configuration-specific manual and part references for matched blades or tools, drive components, seals and position sensors where fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.

Configuration-specific document checklist

Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.

Compare configurations for your project

For Sheep Head Cutting Machine | HT-S306, keep the complete identifier HT-S306 attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.

Start with this page's listed reference fields: Drive System: Hydraulic; Construction Material: Stainless Steel / Hot Galvanized Steel. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.

Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.

Purchasing review and enquiry preparation

Start with Sheep Head Cutting Machine | HT-S306 and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.

Use the linked sheep & goat processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.

Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-S306 and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.

Source reference configuration 1
ItemSpecification
Product NameSheep Head Cutting Machine
ModelHT-S306
ApplicationSheep & Goat Head Processing
Cutting MethodHydraulic Head Splitting
Drive SystemHydraulic
OperationSemi-Automatic
Construction MaterialStainless Steel / Hot Galvanized Steel
Suitable AnimalsSheep, Goat
InstallationHead Processing Workshop
Processing TypeContinuous Industrial Operation

Buyer FAQ

What is a Sheep Head Cutting Machine used for?

It is used to split or open sheep and goat heads after removal from the carcass for inspection and by-product processing.

Why use hydraulic cutting instead of manual cutting?

Hydraulic cutting provides stronger, more consistent cutting force, reduces operator fatigue, and improves production efficiency.

What materials are used?

The machine is manufactured using stainless steel for food-contact parts, with optional hot-galvanized structural components for durability.

What information is needed to select this equipment?

State incoming product size and temperature, target cut or separation, rate, output specification, interfaces, blade or tool arrangement and guarding requirements. Agree a representative-product trial and the acceptance criteria.

Are these specifications an approved supply commitment?

No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.

Related configurations and guidance

Sheep & goat processing equipment categories Sheep & goat processing process application Check complete model identifiers and suffixes

Reference specification and document status

Download HT-S306 reference specification and verification checklist

This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.

Applications

Sheep & goat processing workflowExplore sheep & goat processing by process task, source equipment and project conditions.

Capabilities

Sheep & goat processing line planningExplore sheep & goat processing by process task, source equipment and project conditions.

Request specifications

Add company or technical details (optional)

Equipment under review: HT-S306

Start with what you know. You can send drawings or photographs by email.

Continue your technical review