Sheep Automatic Bleeding Conveyor Rail | HT-S105-I
Sheep Automatic Bleeding Conveyor Rail. Compare load range, dimensions and process interfaces; share your requirements for configuration review.

Specification notes
| Model | HT-S105-I |
|---|---|
| Voltage | 380V / 3 Phase / 50Hz |
| Motor Power | 2.2 kW |
| Maximum Capacity | Up to 400 Heads/Hour |
| Drive System | Automatic Chain Drive |
| Material | Hot Galvanized Steel or Stainless Steel |
| Data status | Source reference R1; configuration requires written confirmation |
Use and process role
Automatic Overhead Conveyor System for Efficient Sheep & Goat Bleeding
The Sheep Automatic Bleeding Conveyor Rail is an automated overhead transportation system developed for continuous sheep and goat slaughter lines. It is designed to suspend carcasses immediately after slaughter and transport them through the complete bleeding process, ensuring stable movement, consistent bleeding time, and improved production efficiency.
The system consists of a closed C-beam track, drive unit, forged conveyor chain with push fingers, wear-resistant walking wheels, tensioning device, climbing and descending track sections, and a frequency-controlled drive system. According to different slaughterhouse layouts, the conveyor can be configured with either φ60 × 4 mm stainless steel tube rails or 40 × 40 × 4 mm stainless steel dual rails, allowing flexible installation in both new projects and existing facilities.
The standard HT-S105-I model operates on 380V / 3 Phase / 50Hz, is powered by a 2.2 kW motor, features a 1200 mm hanger spacing, and supports production capacities of up to 400 sheep or goats per hour.
Typical applications include:
Sheep slaughterhouses
Goat slaughter plants
Halal slaughter facilities
Commercial abattoirs
Export meat processing factories
Structure and working principle
After stunning or halal slaughter, the sheep or goat carcass is secured with a bleeding shackle and connected to the overhead pulley hook. The automatic conveyor chain transports each carcass along the bleeding rail at a controlled speed.
Using a frequency inverter, the conveyor speed can be adjusted to match slaughter capacity and required bleeding time. The automatic movement ensures every carcass remains suspended for sufficient drainage before entering the skinning and carcass processing sections.
Source-listed construction and features
Fully Automatic Continuous Operation
The conveyor automatically transports carcasses through the bleeding section, reducing manual handling and improving workflow continuity.
High Processing Capacity
Capacity up to 400 heads/hour
Suitable for medium and large sheep slaughterhouses
Continuous production operation
Multiple Rail Options
The system supports:
Tube Rail (φ60 × 4 mm 304 Stainless Steel)
Dual Rail (40 × 40 × 4 mm 304 Stainless Steel)
Different rail structures can be selected according to slaughterhouse layout and production requirements.
Heavy-Duty Conveyor Structure
Main components include:
Closed No.8 C-beam track
Die-forged conveyor chain with push fingers
High-polymer wear-resistant wheels
Driving device
Pneumatic tension system
Climbing and descending track
Rotation section
Frequency conversion control system
Adjustable Conveyor Speed
The frequency inverter enables flexible speed adjustment to accommodate different slaughter capacities and production schedules.
Hygienic and Durable Design
Available in:
Hot galvanized steel
Food-grade stainless steel
The corrosion-resistant construction performs reliably in wet slaughterhouse environments and is easy to clean.
Applications and integration
The Sheep Automatic Bleeding Conveyor Rail is installed immediately after the bleeding lifting machine and before the skinning section.
Typical Process Flow
Live Sheep
↓
Stunning / Halal Slaughter
Bleeding Slope Lifting Machine
Automatic Bleeding Conveyor Rail
Complete Bleeding
Hind Leg Skinning
Head Removal
Evisceration
Carcass Washing
Chilling
Suitable for:
Sheep slaughterhouses
Goat slaughter plants
Halal slaughter facilities
Export meat processing factories
Industrial livestock processing plants
Selection conditions and project fit
Provide rail or belt dimensions, working height, travel direction, carrier spacing, load range, speed and upstream/downstream connection drawings. A similar-looking carrier is not proof of fit.
Evidence, configuration and document status
The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.
Source and version
Reference compilation R1, 2026-11-16. Supplied document: 1. 羊致昏 屠宰 放血设备.doc; section 1.18. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.
Installation and process interfaces
Provide the load and product range, travel direction, rail/belt section or mating geometry, working heights, supports and maintenance clearances. Similar appearance is not proof of fit.
Utilities, control and feedback requirements
For powered equipment, confirm the matching drive, supply, control and line signals. For passive components, confirm mechanical interfaces and any requirements of the receiving equipment; no powered or feedback capability should be assumed.
Maintenance and part identification
Request the configuration-specific manual and part references for rollers, chains, hooks, bearings, guides and drive elements where applicable. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.
Configuration-specific document checklist
Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.
Compare configurations for your project
For Sheep Automatic Bleeding Conveyor Rail | HT-S105-I, keep the complete identifier HT-S105-I attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.
Start with this page's listed reference fields: Voltage: 380V / 3 Phase / 50Hz; Motor Power: 2.2 kW; Maximum Capacity: Up to 400 Heads/Hour; Drive System: Automatic Chain Drive; Material: Hot Galvanized Steel or Stainless Steel. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.
Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.
Purchasing review and enquiry preparation
Start with Sheep Automatic Bleeding Conveyor Rail | HT-S105-I and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.
Use the linked sheep & goat processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.
Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-S105-I and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.
| Item | Specification |
|---|---|
| Product Name | Sheep Automatic Bleeding Conveyor Rail |
| Model | HT-S105-I |
| Application | Sheep & Goat Bleeding Transportation |
| Voltage | 380V / 3 Phase / 50Hz |
| Motor Power | 2.2 kW |
| Hanger Distance | 1200 mm |
| Maximum Capacity | Up to 400 Heads/Hour |
| Rail Options | Tube Rail / Dual Rail |
| Tube Rail | φ60 × 4 mm 304 Stainless Steel |
| Dual Rail | 40 × 40 × 4 mm 304 Stainless Steel |
| Drive System | Automatic Chain Drive |
| Speed Control | Frequency Inverter |
| Material | Hot Galvanized Steel or Stainless Steel |
Buyer FAQ
What is the Sheep Automatic Bleeding Conveyor Rail used for?
It is used to automatically suspend and transport sheep or goat carcasses through the bleeding process before skinning and further processing.
What production capacity can it handle?
The standard HT-S105-I system can process up to 400 heads per hour, depending on slaughter line configuration.
What information is needed to select this equipment?
Provide rail or belt dimensions, working height, travel direction, carrier spacing, load range, speed and upstream/downstream connection drawings. A similar-looking carrier is not proof of fit.
Are these specifications an approved supply commitment?
No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.
Related configurations and guidance
Reference specification and document status
Download HT-S105-I reference specification and verification checklist
This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.